Table of Contents
Use a stepladder and a pencil to draw a horizontal line where your bookcase meets the wall. Remove the books and move the bookcase away from the wall. Use a stud finder to search for wall studs. If possible, find two studs and secure the bookcase with two straps to ensure a good hold.
How do you attach a bookshelf to the wall?
Glue the Velcro strips the top of the bookcase, and then move the unit back into place and connect the strapping to the Velcro. You can use strapping on a concrete or brick wall by drilling a hole with a masonry bit, installing a masonry anchor and driving the screw into the anchor.
How do you secure a bookcase to the wall without drilling?
Apply a moderate line of urethane glue to the back of the hook or bracket to be placed on the wall. Give it 24 hours or longer to fully dry and set. Thread a tether system connecting the furniture you need close to the wall to the mounted pieces. You can use plastic ties, steel cables, or Velcro straps to accomplish.
Do I need to anchor bookshelf to wall?
Bookcases do not need to be fixed to the wall unless circumstances call for it due to safety reasons. It is recommended that you fix your bookcase to a wall if you have pets or small children, or if you live in areas that are prone to earthquakes.
How do you secure a freestanding bookcase?
Place silly putty, velcro, or surfboard wax under breakables, to keep them from falling off shelves. Add a thin strip of wood as an additional barrier.
How do you stop a bookshelf from falling over?
Fasten a furniture strap to the wall and the bookcase to keep it from tipping over. The straps cost about $6 at Target and hardware stores. Or, fasten the bookcase to the wall by driving 3-in. screws through the back of the bookcase (at obscure locations) into studs (be sure you hit studs).
How do you stabilize a bookcase?
Right the bookshelf and put it back into position. Raise or lower each foot until the bookcase stops wobbling. Raise the feet by turning them clockwise; lower them by turning them counterclockwise. Affix the bookcase to the wall for maximum stability, advises Today’s Homeowner.
How do you anchor furniture to a concrete wall?
Simply drill a hole into the concrete, hold the fixture you’re fastening over the hole, then use a hammer to tap the anchor into the hole. As you drive in the pin, the sleeve expands outward, trapping the anchor in the hole.
Do leaning bookshelves need to be anchored?
Bookcases, dressers, armoires and cabinets are all worthwhile candidates for anchoring — so is any piece of furniture holding a TV. Consider, too, whether a piece of furniture has drawers, shelves or doors.
Do shelves need to be anchored?
If you’re going to be attaching your floating shelf and bracket to a wall stud, you do not need any anchors. If you are working with plaster or drywall, however, additional support is necessary. Wall anchors, also called molly plugs, will help you build a sturdy foundation for your shelf.
What is an adhesive anchor?
An adhesive anchor system is a type of post-installed fastening for attachment of metal to concrete or masonry base material, or new concrete to existing concrete. Adhesive anchors transfer load placed on the anchor element to the base material through bond strength.
How do you secure a bookcase in the middle of a room?
Use Furniture Straps Furniture straps can be found at most hardware stores. They attach to the back of your bookshelf and studs in the wall. They come in both metal, plastic, and fabric form. One positive of furniture straps is that many types are easily detachable, so you can move the furniture if you need to.
How do you brace a bookcase?
Stand a level on the side of the bookcase. If the level shows that the bookcase is leaning to one side, tap on the side of the bookcase with a rubber mallet until the bookcase is level. If it won’t stay in place, tighten the screws slightly and tap on the case until it stays level.
Why is my bookcase leaning forward?
Start with the more wobbly side of the bookshelf. Place a shim under that leg and check the level. If it’s not yet level, pushing the shim in farther or pulling it out may be sufficient, or you might have to start stacking shims, in which case shimming may not be a stand-alone solution if you have safety in mind.
Do you have to secure furniture to the wall?
The reality is that ALL of your furniture needs to be secured to the wall, because you cannot tell by looking at a piece of furniture (or a TV) whether or not it could tip-over.
What anchors do you use for brick?
Nylon-Nail-its- are a light-duty type of brick anchor that has a nylon body with a steel nail. They are set into the brick by driving the nail with a hammer into the anchor body, and the anchor body expands against the walls of the hole in the brick. The nylon nail-it is easy to install.
How do you attach wood to brick without drilling?
The best way to attach wood to brick without drilling is to use a brick wall hook. These hooks are designed for brick walls, even slightly curved ones. They are removable, adhesive-free, and strong (holds up to 25 lbs). You can install them in seconds and most importantly: no holes to drill.
Do you screw into brick or mortar?
As a general rule, unless you’re hanging something very light (just a pound or two), always drill into brick. Mortar doesn’t have the strength to hold much weight, and it deteriorates much faster than brick.
