Table of Contents
Can I sealcoat my own driveway?
Here are some general things to know about DIY driveway sealing: If this is your first time, opt for premixed driveway sealcoating so you’re pouring right from the bucket with no blending or mixing required. Asphalt sealers cure in just a few hours, but the driveway can’t be used for vehicle traffic for 24 to 48 hours.
Is driveway sealing worth it?
Sealing an asphalt driveway gives it a fresh, black finish, but the job should be done only once every two or three years. Sealing the driveway yearly can lead to unsightly hairline cracks and peeling. Many people believe that concrete driveways don’t need maintenance, so they may never apply a sealer.
Is it cheaper to seal your own driveway?
Sealing the driveway yourself will be cheaper than hiring a professional, but you’re still going to have to fork over some cash to do the job right. According to CostHelper, DIY supplies cost about about $50 to $200, depending on the driveway’s condition and size.
How much does a 5 gallon bucket of driveway sealer cover?
Average Asphalt Sealer Prices Note: The typical 5-gallon sealcoat container can cover between 250-500 square feet depending on the material’s condition and texture.
Do it yourself driveway sealer vs professional?
The biggest difference between DIY sealcoating and professional sealcoating is that professionals use spray tanks. Edges are still done the same way, but large areas are evenly coated with a large tank that feeds a high pressure spray wand.
How much does it cost to sealcoat a driveway?
In the United States, the average cost for materials and labor to sealcoat asphalt is $0.17 to $0.24 per square foot. For a basic 480 square foot driveway, you can expect to pay $80 to $115 for sealing. For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating.
Is it better to spray or brush driveway sealer?
Sprayers provide better control of the amount of sealant used, making the application process more precise. Squeegee machines take a little longer than sprayers, but hand squeegees are the most timeconsuming. On many jobs, it will take twice as long for workers to apply sealcoating by hand.
What type of driveway sealer is best?
Coal tar asphalt driveway sealer is considered the standard for asphalt — in some places, that is. The preferred choice for both asphalt driveways and streets for many years, coal tar sealer is made from sticky coal tar. It can last for up to five years on a driveway.
Why you shouldn’t seal your driveway?
He added that sealing a driveway could yield unwanted consequences: Oil from the bitumen (the black glue that holds the asphalt together) will be tracked into the home, or the sealant could wear away unevenly, making the surface look as if it’s peeling.
What happens if it rains after sealing driveway?
Will Rain Ruin a Freshly Sealed Driveway? Rain and other precipitation will ruin the hard work you put into sealing your driveway. Rain will wash away driveway sealer, resulting in an uneven or nonexistent coat of sealant.
What happens if you don’t seal asphalt driveway?
The UV rays will attack this thin coating, and it will begin to harden and fail. If you don’t take off your shoes when you come into your home, you’ll track the asphalt indoors, discoloring vinyl flooring and carpets. Once the sealer starts to wear off, your driveway starts to look bad.
Does Sealcoating fill cracks?
Sealcoating is not designed to be an asphalt crack filler, it is made for sealing the surface and protecting it from the elements such as UV light, salts and oils. It is not flexible enough to fill a crack without re-cracking and it does not have adhesion quality’s that Asphalt Crack Filler has.
Do driveway sealers need two coats?
Most driveway sealer manufacturers recommend two coats with a minimum drying time of eight hours between coats, so this driveway sealing project will fill an entire weekend.
Is oil based driveway sealer better?
Unlike water-based driveway sealers, oil-based varieties have a longer cure time and distinct odor that is quite strong and often lingers in the air for days after the sealing is complete. Oil-based sealers also contain VOCs, or volatile organic compounds, which pollute the environment.
What is the best time to sealcoat your driveway?
Ideally the best time of year for driveway sealcoating is between May and October. However, you will want to check the forecast to be as sure it will not rain while the driveway is setting. It is important to not touch or drive on the seal coated driveway for at least 12 hours.
How much does it cost to Topcoat a driveway?
Cost to Sealcoat Asphalt Driveways The average cost for a contractor to sealcoat your asphalt driveway is $0.17 to $0.24 per square foot. Driveways measuring 480 square feet cost $80 to $115 to sealcoat. Larger driveways cost $170 to $240 to sealcoat. Cost ranges may vary by contractor and region.
How many gallons of sealer do I need?
Divide the square footage of the driveway by 80 to find the number of gallons of sealer you need for one coat. Each gallon covers about 80 square feet and each bucket of sealer contains 5 gallons. Divide the number of gallons by 5 to find the number of buckets you need, reveals MV Organizing.
Can you asphalt seal over concrete?
Well, the answer is yes! It is safe to pave asphalt over concrete. Concrete is a great base material because it is stable and allows for excellent compaction of the asphalt above. In fact, many miles of concrete roads are paved over with asphalt every year.
How much does slurry seal cost?
How much does slurry seal cost and how is it paid for? Slurry seal costs about $. 60 per square foot and is very cost effective for many types of applications, when compared to a complete pavement overlay, which costs about $1.50 per square foot.
