Table of Contents
Does VCT tile need to be sealed?
VCT should be sealed a few days after it is installed. VCT can scratch if it comes in contact with abrasives, and it can also fade when exposed to direct sunlight. For these reasons, VCT should always be sealed a few days or weeks after installation with a clear, acrylic floor polish.
How do you clean and seal VCT tile?
VCT Cleaning and Sealing Tips: VCT flooring should be cleaned daily using a dust mop, damp mop, and a clean water rinse. This helps maintain the floors between professional cleanings. Occasionally VCT flooring will require a wax coating be applied to maintain the clean, shiny appearance of the floors.
How do you protect VCT tile?
Proper matting: Use walk-off mats at all entryways to help keep floors clean and dry longer; however, it is vital that these mats be cleaned regularly. Daily cleaning regimen: Involves sweeping and dust mopping dirt and soil off VCT surfaces, a crucial step to prevent damage to the tile finish.
How do you finish VCT?
Once new VCT is installed, it must be properly stripped and waxed with at least two coats of wax applied. For the best results, have the VCT stripped and waxed prior to moving furniture or people into the space, ideally allowing a full 24 hours of cure time before it is walked on.
How often should you strip and wax VCT flooring?
Without proper maintenance the wax on your VCT flooring will begin to yellow and may look dingy. Floors that are not actively maintained with daily floor buffing need to be stripped every 6-9 months. Those that are maintained with daily floor buffing ” and periodic machine scrubs ” can be stripped annually.
How do you wax new VCT tile?
How to Wax Vinyl Composite Tile Clean the VCT well. Set a bucket of water next to a tray filled with the VCT wax. Mop six to nine feet of flooring at a time, overlapping each area slightly with the mop to ensure good coverage. Apply a second coat of wax at this time if not buffing the floor.
How do I make my VCT look new?
Dip a clean micro fiber flat mop into the bucket and then apply the finish on the floor with it. Use slightly overlapping strokes for better effect. The tiles will immediately look wet and shiny. Leave no area of the VCT floor uncovered.
How do you get scratches out of VCT?
How to Remove Scratches From a VCT Tile Clean the VCT floor thoroughly with vinyl floor cleaner. Fill very small scratches with touch-up paint that matches the color of the tile. Apply a dab of liquid seam sealer onto the scratches with a clean cloth. Sand the scratches with fine-grit sandpaper to even the tile surface.
Is VCT tile waterproof?
Since VCT is tough, water-resistant, stain-resistant flooring that’s made for everyday mop-ups, it’s best for kitchens, laundry rooms, mudrooms, basement rumpus rooms and utility spaces of all kinds.
How do you seal commercial vinyl tiles?
Apply 3 to 5 coats of high-quality commercial floor polish such as Armstrong S-480 Commercial Floor Polish. The use of a high-quality stain-resistant sealer such as S-495 Commercial Floor Sealer beneath the polish should be considered in areas of high traffic, high soil load and areas where staining potential is high.
Can you wax VCT tile?
Vinyl composition tile (VCT) is a very durable choice if it is properly installed and maintained. The most important thing to do after installation is wax the floors. A good coat of wax will also make for easier daily sweeping and mopping.
How long does it take VCT tile to dry?
Up to 12–24 hours. High temperature and low humidity will cause the adhesive to cure faster. After installation, restrict foot traffic and moving of heavy objects for 24–48 hours to allow adhesive to cure properly.
How long does VCT flooring last?
Vinyl flooring is highly durable. If installed and maintained correctly, it can last upwards of 10-20 years.
How do you maintain VCT flooring?
Daily cleaning regimen Involves sweeping and dust mopping dirt and soil off VCT surfaces, a crucial step to prevent damage to the tile finish. Then, damp mop or auto-scrub floors using a neutral-impact professional tile cleaner to remove particulate left behind.
Can you use vinegar on waxed floors?
Cleaning waxed surfaces – vinegar dissolves the wax, and should not be used to clean waxed furniture. However, vinegar is a reliable option for removing an old coat of wax from a surface. To clean waxed surfaces, a wax cleaning solvent should be used instead.
How much does it cost per square foot to strip and wax floors?
Strip and wax jobs are charged by the square foot. The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.
What kind of wax do you use on vinyl floors?
Luxury vinyl flooring doesn’t require the application of any type of wax. However, it can benefit from an acrylic finish, and it’s important to understand the difference between the two. Floor wax is typically derived from carnauba wax, which makes it a more solid substance.
