Table of Contents
If it is an art piece that will be framed or displayed on a small easel, it can be sealed with a brush-on, water-based sealer like “Liquitex Gloss Varnish” or “Ranger Gloss Multi-Medium.” Varnishes that are not water-based, either brush-on or spray, will act as solvents and totally destroy your work.
What do you seal alcohol ink tiles with?
At least I think I did! I tried using Krylon’s Clear Polyurethane spray (http://www.krylon.com/products/clear-polyurethane-coating/) on alcohol ink on ceramic tile! It worked! I sprayed one coat, waited about 30 minutes and sprayed a second coat.
What is the best sealer for alcohol ink?
1. Krylon Kamar Varnish. Kamar varnish is the MOST IMPORTANT first step FOR ALL alcohol ink art. Kamar varnish is non yellowing, acid-free, and vital in protecting your alcohol inks from interfering with any other product.
Can you use alcohol ink on ceramic?
Alcohol Ink is an amazing art medium that can be used in many ways. It works best with non-pourous materials. We love using alcohol inks on our ceramic mugs and tiles. You can create lovely gifts and home decor with just the colors and style you want very easily.
Can you put Mod Podge over alcohol ink?
So, the final tally, I do not recommend the DecoArt/American Triple Thick Gloss Glaze, the Mod Podge Clear Acrylic Sealer, or the Krylon Covermaxx Acrylic Spray for use with alcohol ink on glass. And if you’re looking for a slightly frosted matte finish, the Mod Podge Matte Acrylic Spray works just fine.
How do you seal alcohol ink paintings?
Krylon Kamar® Varnish. Start with thoroughly dried alcohol ink art. Allow at least 24 hours or more for best results. In a well-ventilated area, spray artwork with 2-3 light coats, about 12-14 inches away from subject, allowing 30 minutes to an hour of drying time between layers.
Do I have to seal alcohol ink before epoxy?
If in doubt or for peace of mind, you can never go wrong erring on the side of caution and sealing your artwork first. For this particular project, however, it’s not necessary to seal alcohol ink on yupo paper before applying ArtResin for a couple of reasons. Here’s why: ArtResin is a sealant.
Do you need to seal alcohol ink on glass?
The reason alcohol inks do not do well with porous materials is that they will soak in and begin to fade. When using alcohol ink on glass, make sure to use a clear sealer such as resin or the Ranger’s Gloss Multi-Medium so the colors do not fade or wipe off.
Are alcohol inks waterproof?
Alcohol inks are fast-drying, highly pigmented, alcohol-based inks that are great to use on any hard, non-porous surface including glass, metal, plastic, ceramic, stone, leather and polymer clay. Alcohol ink is waterproof, adding to its durable properties. These dye-based inks are transparent and extremely vibrant.
Can you put resin over alcohol ink?
Today, we demonstrate how to resin over alcohol ink! Covering alcohol ink and yupo paper with a coating of ArtResin is easy – in fact, epoxy resin takes alcohol ink next level, giving it a glossy finish and deeply saturating the colours to make them pop!.
How do you seal alcohol ink UK?
Sealing and Varnishing Your Alcohol Ink Artwork The very best sealant is epoxy resin as it will cover the inks without smearing or bleeding. It’s hard coating also prevents scuffing, scratching and other damage. However, varnishing with resin can be quite time consuming.
Does alcohol ink fade over time?
Alcohol inks are dye-based and translucent by nature and therefore, if left unprotected in direct sunlight, will lose their lovely vibrancy over time and some will fade away completely.
How long does it take for alcohol ink to fade?
1) Let the alcohol ink totally dry It normally takes approximately 72 hours for alcohol ink to dry on a surface. It may feel dry to the touch soon after finishing it, but you want your medium to fully cure on the substrate it is on before introducing another medium to seal it with.
Do alcohol markers fade over time?
Alcohol inks are a combination of solvent and dye. Sadly, all dyes are “fugitive”. Fugitive colors fade with exposure to light, heat, humidity, and even over time.
How long does alcohol ink need to dry before epoxy?
Whether you are sealing alcohol ink on paper, sealing alcohol ink on tumblers, sealing it on metal, glass, ceramic, and most other substrates, the process looks the same: The ink must be FULLY DRY for 24-48 hours before beginning this process.
Can alcohol ink be fired in a kiln?
Alcohol inks burn off in the kiln. Once your piece is slumped, sandblast or etch it to give it “tooth”, and apply the alcohol inks. You’ll then need to coat it with some sort of sealer — clear, non-yellowing Krylon or Rustoleum in a spray can from the paint aisle works just fine.
Can you use alcohol ink on wood?
Wood (wood is a porous material, as is fabric, but Alcohol Inks still work on it as you can see. You would want to use it for small projects as it takes more ink.)Jul 31, 2019.
How do you seal an ink drawing?
Golden Archival Spray Varnish is another good choice for protecting pen and ink artwork. This archival varnish is available in Gloss, Satin and Matte. Like Lascaux UV Protect, Golden Archival Spray Varnish can also be used with other media.
Can you use alcohol pens on wood?
Also remember that alcohol ink markers can be used not only on paper but also on metal, wood, glass, fabric, vinyl and other materials.
