Table of Contents
To scale a solid or surface model: In a part document, click Scale (Features toolbar) or Insert > Features > Scale . Set options in the PropertyManager. Click. The geometry of the model increases or decreases in size according to the scaling factors and other options you set.
How do you scale a model?
Divide the real life dimension of either length or width by that of the model. So, say the real life object had a length of 55m, and the model had a length of 50 cm, or 0.5m, then do 55/0.5. This is equal to 110.
How do I scale a drawing in Solidworks?
You can change the scale of a drawing sheet by selecting a scale from a predefined list or specifying a custom scale. To change the scale of an existing drawing sheet: In the status bar, click Sheet Scale and click a scale. If there are annotations in the drawing sheet, specify options in the dialog box and click OK.
How do I rescale an assembly in Solidworks?
To save a SOLIDWORKS assembly as a part: Open the newly saved multi-body part. Access the Scale feature (Insert > Features > Scale). Select all of the solid bodies in the part to be scaled – note you may need to access the Feature Manager and expand the Solid Bodies folder to select the bodies.
How do I change the scale in Solidworks 2020?
Setting Custom Scales for Drawing Views In a drawing, select an existing view or insert a new view. In the PropertyManager, under Scale, select Use custom scale. In the box, enter a scale in the format x:x or x/x . You can also click and select a predefined scale from the list.
How do you calculate scale model size?
To find the Scale of your Model: Take the length of the Full Size Ship in Feet, multiply (x) by 12 to get the Length in Inches. Take that number and Divide it by the Length of your model (also in Inches), and you will have determined the Scale.
How do you calculate scale size?
For example, if the scale factor is 1:8 and the real measurement is 32, divide 32 ÷ 8 = 4 to convert. To convert a measurement to a larger measurement, simply multiply the real measurement by the scale factor. For example, if the scale factor is 1:8 and the measured length is 4, multiply 4 × 8 = 32 to convert.
Where is sheet scale in Solidworks?
Setting Scales To set the scale of an existing drawing sheet, do one of the following: In the status bar click Sheet Scale and click a scale. Right-click the sheet and select Properties, then edit the values of Scale.
What is a scale bar?
A scale bar is a line or bar divided into parts. It is labeled with its ground length, usually in multiples of map units, such as tens of kilometers or hundreds of miles. Scale bars are associated with a map frame in a layout.
How do you scale a part in an assembly?
Open the newly saved multi-body part. Access the Scale tool (Insert, Features, Scale). Select all of the solid bodies in the part to be scaled. Choose the Scale Factor and other options as desired (for best results with a multi-body part, scale about the Origin).
Can you scale parts in Solidworks?
You can scale a part or surface model about its centroid, the model origin, or a coordinate system. In a part document, click Scale (Features toolbar) or Insert > Features > Scale .
How do you scale an assembly in Solid Edge?
Solid Edge-How to Scale a Part Once you have saved the original part. In the blank part document select “Part Copy” which can be found in the Clipboard. Select your part from the file location. The Part Copy Parameters dialogue box appears. Towards the bottom you will see where you can scale the part.
How do I add a scale bar in Solidworks?
Scales in Drawings To set the scale of an existing drawing sheet, do one of the following: In the status bar click Sheet Scale and click a scale. To set the scale of a drawing view, do one of the following: For existing drawing views, select a view or views, then set the Scale in the PropertyManager.
What scale can you use when you create a drawing view *?
A sheet scale is a standard scale value for drawing views placed on the working sheet. Typically, the sheet scale is indicated in the drawing border title block. When you place a drawing view on the same sheet using a different scale, you can note the exception scale value in a drawing view caption.
What is an example of a scale model?
A scale model is an enlarged or reduced representation of an object that has the exact same proportions as the actual object. Maps and floor plans are great examples of scaled models (drawings), as is the typical plant and animal cell illustrations in textbooks and online.
What is the formula for scale factor?
The basic formula to find the scale factor of a figure is: Scale factor = Dimensions of the new shape ÷ Dimensions of the original shape. This can also be used to calculate the dimensions of the new figure or the original figure by simply substituting the values in the same formula.
What is a 1/20 scale?
What does a 1:20 scale mean. The same goes for a 1:20 scale, which when used, represents a subject at a size 20 times smaller than its real word dimensions.
What are the scale sizes for models?
Models come in a range of scales, the most common being 1:4, 1:8, 1:12, 1:16, 1:18, 1:24, 1:48, and 1:72.
What is a linetype scale?
Linetype scale (LTSCALE) determines the scale and appearance of dashed lines as they appear in your drawing. This setting becomes especially important when you go to plot, since lines that appear dashed in Model Space may appear solid in Paper Space if their LTSCALE isn’t exactly correct.
How do I change the size of a sheet in Solidworks?
In an open drawing, you can change to a different sheet format. In the FeatureManager design tree, right-click Sheet Format and click Properties.Sheet Format/Size Click New (Standard toolbar). Select Drawing , then click OK. Select from the following, then click OK.
How do I change the drawing size in Solidworks?
Not to worry, with SOLIDWORKS it’s simple to set a custom scale for any drawing view. This can be done by first selecting the drawing view and then selecting “Use custom scale” in the Property Manager. Note that any changes to the scale of a drawing view will also affect the scale of any views projected from it.
