Question: How To Sand And Stain Hardwood Floors

Table of Contents

Prepare the Floor for Refinishing. Take the following steps before wood floor refinishing. Pull Up the Shoe Base Moulding. Rough-Sand the Floor. Sand the Edges and Corners. Screen Sand the Floor. Remove All Dust. Apply the Wood Stain. Apply the Finish.

How much does it cost to sand and stain a hardwood floor?

If your hardwood floors are dull, scratched, and looking old, it’s probably time to refinish them. According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor.

How do you sand and refinish hardwood floors yourself?

Can you sand and stain floors yourself?

Sanding and refinishing your hardwood floors as a DIY project is a time investment, but it is less expensive than paying a professional. Refinishing your floors yourself can cost between $500 and $1,000 depending on square footage. This project can take more than three or four days.

Do I have to sand my hardwood floors before staining?

Yes. When you want to stain or change the color of your hardwood floors, you MUST fully sand and refinish the floors. If you don’t sand the floors first, the stain won’t properly penetrate the hardwood nor will the polyurethane properly adhere. This is the ONLY way to change the color of your hardwood floors.

Can I use a hand sander to sand a floor?

The process for sanding a floor by hand would be, as a general rule, to start on a 40 grit sandpaper and work your way up to 100 or 120 grit paper to leave a fine finish. It is important to keep any sander moving so it does not dig into or burn the floor. Get yourself a floor sander, or better still hire a pro.

What is the cheapest way to refinish hardwood floors?

Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.

Can you stain a floor without sanding?

Luckily, you have options other than leaving the floor as it is or replacing it. The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.

What kind of Sander should I use on hardwood floors?

Unless you plan to sand many floors in your lifetime, your best choice of floor sander is the random orbital sander from one maker in particular. Unless you plan to sand many floors in your lifetime, the best choice for do-it-yourself floor refinishing is the random orbital sander.

Is it difficult to sand hardwood floors?

Sanding hardwood floors might seem like a pros-only project. And then there’s that big, scary sanding machine… But it’s really not that difficult. I’ve helped hundreds of homeowners—some of them complete DIY novices—successfully prep their floors for a new finish.

What grit sandpaper do you use to sand hardwood floors?

Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.

How many coats of stain do I need for hardwood floors?

How many coats will be applied? The standard for a hardwood floor is at least three coats. This consists of one seal coat (which may be the stain) and two coats of finish. Additional costs of finish may be applied depending on the need.

How long does it take to sand a floor with an orbital sander?

How long does it take to sand a floor with an orbital sander? Unless your floor is in flat and in very good condition, an orbital sander is going to increase your refinishing time but 2-3 times. Let’s say 2-4 days per room as opposed to 1-2 days with a full sanding kit. For handheld orbitals, double that again.

How do you prep hardwood floors for staining?

Why do you have to sand between coats of polyurethane?

The main reason to sand polyurethane between coats is to level dust nibs and other flaws, not to create a better bond. This is demonstrated here by the gloss remaining in the pores after sanding the surface. The next coat of finish still bonds in the pores even though the finish there is rarely scuffed.

Is it worth refinishing hardwood floors yourself?

If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.

Can I use a palm sander to refinish hardwood floors?

The palm sander is definitely the most common tool for sanding a wooden floor by hand. Use it with a coarser sandpaper grit for a lot of efficiency and quick results. Palm sanders also have a square edge, which means you can sand right into the corners of the floor.

What is the best sander for sanding a floor?

Top 5 Best Sanders for Floors Makita 9403 4″ x 24″ Belt Sander. Bosch 1250DEVS Random Orbital Sander. Clarke Ez-8 Floor Drum Sander.

Can you stain hardwood floors darker without sanding?

Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There’s no stripping or heavy sanding necessary to remove the old finish!.

How can I restore my hardwood floors without sanding?

3 Approaches to Refinishing Hardwood Floors Without Sanding Use a store-bought chemical abrasion kit. Buff and recoat floors with polyurethane. Use a revitalizer.

How much does it cost to refinish $1000 square feet of hardwood floors?

Cost per square foot to refinish hardwood floors: Flooring square footage Average cost 751 – 1000 sq. ft. $2,100 1001 – 1500 sq. ft. $2,350 1501 – 2000 sq. ft. $3,500 2001 – 3000 sq. ft. $5,000.