Table of Contents
Can I sand and refinish my hardwood floors myself?
If the scratches don’t go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish. The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new.
Is it worth refinishing hardwood floors yourself?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
How much does it cost to sand wood floors and Restain them?
Nationally, the average cost for refinishing a hardwood floor is $1,761, within a typical range of $1,074 to $2,486. But there’s every chance your floor is anything but average, and your actual costs can vary depending on many factors, especially the availability and cost of labor in your area.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Can I sand my floors myself?
Sanding wood floors is a time consuming but relatively easy procedure. Sanding wood floors & refinishing yourself will definitely save money, and even an inexperienced homeowner can likely do a better job than the lowest bidding handyperson who quotes on it.
How much does it cost to refinish 1500 square feet of hardwood?
Cost per square foot to refinish hardwood floors: Flooring square footage Average cost 751 – 1000 sq. ft. $2,100 1001 – 1500 sq. ft. $2,350 1501 – 2000 sq. ft. $3,500 2001 – 3000 sq. ft. $5,000.
What grit sandpaper should I use for hardwood floors?
Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.
How do you restore hardwood floors without sanding?
3 Approaches to Refinishing Hardwood Floors Without Sanding Use a store-bought chemical abrasion kit. Buff and recoat floors with polyurethane. Use a revitalizer.
How long do you have to stay off hardwood floors after refinishing?
How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.
How much wood is removed when sanding hardwood floors?
When sanding any floor, the amount of wood you remove depends on the coarseness of the paper you use. Flooring professionals can sand away as much as 1/16 inches of wood with the coarsest paper.
What is the difference between refinishing and resurfacing wood floors?
Refinishing involves sanding off the top layer of the floor and adding a fresh top coat over the existing wood. Resurfacing your floor involves more than just putting a layer of polish on top. It may require removing old floorboards, grinding down uneven boards, and reinforcing wood planks with new nails.
How do you refinish a 100 year old wood floor?
Refinishing 100 (plus) year-old hardwood floors Step 1 // prep. Empty the room and prepare for dust onslaught. Step 2 // drum sander. Step 3 // clean the dust. Step 4 // fill. Step 5 // orbital sanders. Step 6 // clean. Step 7 // stain (optional) Step 8 // first poly coat.
Can you sand floors with a hand sander?
The process for sanding a floor by hand would be, as a general rule, to start on a 40 grit sandpaper and work your way up to 100 or 120 grit paper to leave a fine finish. It is important to keep any sander moving so it does not dig into or burn the floor. Get yourself a floor sander, or better still hire a pro.
Can you refinish floors in one day?
A screen and re-coat is a one-day process that doesn’t give you a blank slate like a full sand and refinish, but it DOES give your hardwood floors a fantastic refresh. The process is dustless (as is our full sand and refinish, by the way), and takes ONE DAY to complete.
Can you use an orbital sander on hardwood floors?
Random orbital sanders are the best choice for do-it-yourself hardwood floor refinishing. They take longer to remove old finishes than drum sanders, but they do not require a lot of experience to use and are less likely to damage your wood floor. Just be sure to keep the sander level at all times.
How long does it take to sand a floor with an orbital sander?
How long does it take to sand a floor with an orbital sander? Unless your floor is in flat and in very good condition, an orbital sander is going to increase your refinishing time but 2-3 times. Let’s say 2-4 days per room as opposed to 1-2 days with a full sanding kit. For handheld orbitals, double that again.
How many sanding sheets does it take to sand a floor?
How long does it take to sand a floor? It’s hard to say without knowing the size and condition of your flooring. But with the right tools (like a drum sander and edger), you should do three sanding passes in an average-sized living room or bedroom in a day.
