Table of Contents
Can I sand hardwood floors myself?
If the scratches don’t go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish. The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours, your floors will look as good as new.
How hard is it to sand hardwood floors?
There’s really no getting around it – sanding your floors is hard work and physically tiring. When you first start sanding you’ll almost instantly see a huge difference in your floor but once you’ve removed most of the varnish and dirt progress will seem so much slower.
Can I sand my hardwood floors with a hand sander?
The palm sander is definitely the most common tool for sanding a wooden floor by hand. Use it with a coarser sandpaper grit for a lot of efficiency and quick results. Palm sanders also have a square edge, which means you can sand right into the corners of the floor.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
What grit sandpaper do you use to sand hardwood floors?
Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.
Are my floorboards suitable for sanding?
If your floorboards are ‘just’ dirty or have a thin coat of paint on them, starting to sand with 24 grit sandpaper should be sufficient. If your floorboards are really uneven or painted in a thick coat of paint, you will probably be best starting to sand your floors with 16 grit paper.
How can I refinish my hardwood floors without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
Should I refinish my hardwood floors myself?
“You can walk across the floor the next day, but we recommend that people leave it alone for a week,” Williams said. “It may look dry, feel dry and smell dry, but it’s not dry.” Williams said he would never consider refinishing the floors himself. “I’m going to handpick a crew when my floors need to be done,” he said.
How long does it take to sand a floor with an orbital sander?
How long does it take to sand a floor with an orbital sander? Unless your floor is in flat and in very good condition, an orbital sander is going to increase your refinishing time but 2-3 times. Let’s say 2-4 days per room as opposed to 1-2 days with a full sanding kit. For handheld orbitals, double that again.
How long will it take to sand a floor?
How long does it take to sand a floor? It can take 1-5 days for a professional and 2-15 days for a DIY enthusiast, depending on the size and condition of the floor. For planning purposes, it would take 1-day per room for a professional and 2 days per room for a homeowner doing DIY.
How do you refinish a 100 year old wood floor?
Refinishing 100 (plus) year-old hardwood floors Step 1 // prep. Empty the room and prepare for dust onslaught. Step 2 // drum sander. Step 3 // clean the dust. Step 4 // fill. Step 5 // orbital sanders. Step 6 // clean. Step 7 // stain (optional) Step 8 // first poly coat.
How do you clean 100 year old hardwood floors?
Spray a small amount of hardwood cleaner directly onto the floor, then wipe the floor down with a dry terry cloth mop. Remember to go with mineral spirits if your finish is unsound. Avoid using a wet mop and always use as little moisture as possible when cleaning your hardwood floors.
How much wood is removed when sanding hardwood floors?
When sanding any floor, the amount of wood you remove depends on the coarseness of the paper you use. Flooring professionals can sand away as much as 1/16 inches of wood with the coarsest paper.
What type of sander is best for floors?
Unless you plan to sand many floors in your lifetime, your best choice of floor sander is the random orbital sander from one maker in particular. Unless you plan to sand many floors in your lifetime, the best choice for do-it-yourself floor refinishing is the random orbital sander.
Can you refinish floors in one day?
A screen and re-coat is a one-day process that doesn’t give you a blank slate like a full sand and refinish, but it DOES give your hardwood floors a fantastic refresh. The process is dustless (as is our full sand and refinish, by the way), and takes ONE DAY to complete.
