Table of Contents
Rotates the model view in part and assembly documents. Click Rotate View (View toolbar) or View > Modify > Rotate then drag the pointer . Drag with the middle mouse button.
How do I rotate a solidworks document without a mouse?
Press the arrow keys. Hold down Shift to rotate in 90° increments. Click Rotate View or View, Modify, Rotate; select a vertex, edge, or face; then drag the pointer. Middle-click a vertex, edge, or face; then middle-drag the pointer.
How do you flip in Solidworks?
Use the left-mouse to move, the right-mouse to rotate with the cursor in the graphics area. Place the cursor over each of the end points or the center of the black origin to flip the sketch.
Where is the view toolbar in Solidworks?
To display SOLIDWORKS toolbars: Right-click in the window border, click Toolbars, and select or clear a toolbar name. Click Tools > Customize.
How do you rotate horizontally in Solidworks?
To rotate a drawing view around a model edge: Select a linear model edge in a drawing view. Click Tools > Align Drawing View > Horizontal Edge or Vertical Edge. The view rotates until the selected edge is oriented horizontally or vertically.
How do I move the mouse view in Solidworks?
Hold down Shift to rotate in 90° increments.Rotating About a Vertex, Edge, or Face. Device Procedure mouse (left button) Click Rotate View or View > Modify > Rotate; select a vertex, edge, or face; then drag the pointer. mouse (middle button) Middle-click a vertex, edge, or face; then middle-drag the pointer.
Where is the Heads-Up View toolbar?
To customize the Heads-Up View toolbar, click Tools > Customize and select the Toolbars tab: Select or clear View (Heads-Up) to show or hide the toolbar. To add toolbar buttons, select the Commands tab. Drag a button from a category to the toolbar.
What is the standard toolbar in Solidworks?
The Standard toolbar controls file management and model regeneration. Removes one or more selected items. The Confirm Delete dialog box provides you with basic and advanced options to remove one or more selected items.
How do you activate a view palette in Solidworks?
The View Palette populates when you: Click Make Drawing from Part/Assembly .In a drawing with no parts or assemblies open: Select the Task Pane and the View Palette . Click Browse () in the View Palette. Browse to a part or assembly, then click Open. Drag a view into the graphics area.
How do I change the mouse settings in Solidworks?
To enable or disable mouse gestures, with a document open, click Tools > Customize. On the Mouse Gestures tab, select or clear Enable mouse gestures. To set the number of mouse gestures in the mouse gesture guide, with a document open, click Tools > Customize.
How do I add a toolbar in Solidworks?
SOLIDWORKS Toolbars Right-click in the window border, click Toolbars, and select or clear a toolbar name. Click Tools > Customize. On the Toolbars tab, select the toolbars to display.
What are the tools in Solidworks?
SOLIDWORKS tools you can use to create complex geometry include: Boundary Boss/Base (Features toolbar). Deform (Features toolbar). Indent (Features toolbar). Flex (Features toolbar). Wrap (Features toolbar). Replace Face (Surfaces toolbar). Intersection Curve (Sketch toolbar). Composite Curve (Curves toolbar).
How do you use the fillet tool in Solidworks?
To create fillets: Click Fillet on the Features toolbar, or click Insert, Features, Fillet/Round. Set the PropertyManager options. For constant radius fillets only, you can use the FilletXpert to add or modify fillets and to manage fillet corners. Click OK .
How do you use the Flex feature in Solidworks?
To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .You can create four types of flexes: Bending. Twisting. Tapering. Stretching.
How do you change the drawing view in Solidworks?
To manually update drawing views: Right-click the Drawing icon at the top of the FeatureManager design tree, and click Automatic view update. If there is no check mark, it indicates that manual view regeneration is enabled. Click either: Edit > Update All Views. Rebuild (Standard toolbar) or Edit > Rebuild.
How do you refresh in Solidworks?
To refresh the view that was most recently active: Press F5. In the SOLIDWORKS Explorer client, click Refresh Views .
How do you refresh a drawing in Solidworks?
Refresh In the Task Pane, select the Design Library tab or Appearances, Scenes, and Decals tab. Click Refresh .
How do you rotate a pan in Solidworks?
Click Pan (View toolbar) or View > Modify > Pan, then drag the pointer . Hold down Ctrl and drag. (In an active drawing, you do not need to hold down Ctrl.) Hold down Ctrl and press the arrow keys.
How do I change controls in Solidworks?
How to customize mouse buttons in SOLIDWORKS Go to the Tools tab of the command ribbon. Select Customize. Select the Mouse Gestures tab. Enable/disable Mouse Gestures and choose the number of gestures from 2-12, assigning commands to spots on the Mouse Gesture Guide.
How do I change the right click in Solidworks?
In a SOLIDWORKS document, click Tools > Customize, or right-click in the window border and select Customize. Select a menu. Select the command to add, rename, or remove.
How do I get the command bar back in SOLIDWORKS?
To access the CommandManager: Click Tools > Customize. On the Toolbars tab, select Enable CommandManager. Click OK.
How do you get the ribbon bar back in SOLIDWORKS?
Right-click on the menu bar or command manager again at the top of the SOLIDWORKS display area, but this time select Customize -> Toolbars -> Reset To Defaults and confirm by selecting Yes.
What is command manager in SOLIDWORKS?
The CommandManager is a context-sensitive toolbar that dynamically updates based on the toolbar you want to access. For example, if you click the Sketches tab, the Sketch toolbar appears. Use the CommandManager to access toolbar buttons in a central location and to save space for the graphics area.
What is Hole Wizard in SOLIDWORKS?
You can use the Hole Wizard to create customized holes of various types. To create hole wizard holes, create a part and select a surface, click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard, set the PropertyManager options, and click .
What are the basics of SOLIDWORKS?
A SOLIDWORKS model consists of 3D solid geometry in a part or assembly document. Drawings are created from models, or by drafting views in a drawing document. Typically, you begin with a sketch, create a base feature, and then add more features to your model.
