Table of Contents
Click Rotate Component (Assembly toolbar) or Tools > Component > Rotate. The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.
How do you rotate a part in Solidworks assembly 2020?
The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area.Using the PropertyManager to Rotate a Component. Option Description Free Drag Select a component and drag in any direction.
How do you rotate an assembly?
On the ribbon, click Assemble tab Position panel Free Rotate . Click the component to rotate. Drag to the appropriate view of the component. To rotate in any direction, click inside the 3D rotate symbol and drag in the appropriate direction.
How do you Unfix a component in Solidworks assembly?
To fix or float an assembly component: Right-click the component in the graphics area or the component’s name in the FeatureManager design tree. Select Fix or Float. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.
What is offset in Solid Edge?
Offset Edge command. Offsets the selected edges to create an imprint of them on a part or surface by a given distance and direction. You can select multiple edges from the same solid or surface, or edges across multiple solids and surfaces.
How do I change the orientation of a Solidworks assembly?
Select the top view from view orientation of “Heads-up View Toolbar” or press “ctrl+5” then click Update Standard View button and choose the front view. A pop-up message will show-up to confirm if you want to change the view, click yes. This feature is the easiest way to change the orientation of your part.
How do you rotate items in Solidworks?
In the PropertyManager, under Mechanical Mates, click Gear . Under Mate Selections, select the rotation axes on the two gears for Entities to Mate . The software assigns gear ratios based on the relative sizes of the cylindrical faces or circular edges you select.
How do you invert a part in Solidworks assembly?
To invert selection: Select items to be excluded. Click Invert Selection. (Selection filter toolbar) or Tools > Invert Selection.
How do you rotate a fixed component in Solidworks?
Click Rotate Component (Assembly toolbar) or Tools > Component > Rotate. The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.
How do I change a fixed component in Solidworks?
To change the fix or float, go to featuremanager deign tree. Select and right click on the component’s name for changing the fix or float condition. Select fix or float from the appearing menu as per your requirement. This way you can fix component or float it in solidworks assemebly interface.
How do I change the position of a part in Solidworks?
To edit a position: In the FeatureManager design tree, select Mate Controller and click Edit Feature . In the PropertyManager, under Mates Positions, select Position 2 from the list. The components move to Position 2. Change the value of Distance1 from 30 to 60 . Click Update Position . Click .
How do you rotate parts in Creo Assembly?
In an open assembly, click Assemble. Select the component to be placed and click Open. Click Move. Select Translate or Rotate from the Motion Type list. Click one of the following options and then follow the appropriate steps: Continue to adjust placement as required. To stop movement, click in the graphics window.
How do I change the rotation point in NX?
you can hold down middle mouse button (for a couple seconds) over area which you want as your rotate point.
How do you change the rotation center in NX?
I’ve found the solution in NX10: If you press “Ctrl + F2” you are able to select one grid point as rotation center. To set the rotation center back to default press “Ctrl + F3”. That’s it.
What is override position in NX?
Override position is very helpful if you want to show a different position of the component at the top level (higher level assemblies). At the subassembly level that component position remains same but at the higher level assemblies that component position can be changed.
How do I rotate a sketch in Solid Edge?
To rotate a drawing view around a model edge: Select a linear model edge in a drawing view. Click Tools > Align Drawing View > Horizontal Edge or Vertical Edge. The view rotates until the selected edge is oriented horizontally or vertically.
How do you switch planes in solid edge?
Change the sketch plane X-axis orientation by doing any of the following: Press the N key to move the green line counterclockwise to the next linear edge along the outside of the plane or face. Press the B key to move the green line in a clockwise direction to the previous linear edge.
How do you rotate orientation in SolidWorks?
One way to do this is to click the mouse wheel and drag across the screen to rotate the part until desired view is found. This can get complicated if the part is rather large. Instead of spending time searching for the desired view, SolidWorks has shortcuts to skip to your desired view by using the Orientation Menu.
How do you rotate a part in SolidWorks drawing?
To rotate a drawing view around its center point: Click Rotate View. (View toolbar), or right-click the view and select Zoom/Pan/Rotate > Rotate View. Do one of the following: Drag the view to the desired rotation. Set options, then click Apply: Click Close to close the dialog box.
How do you align an assembly in SolidWorks?
Follow these simple steps: Click Mate. (Assembly toolbar) or Insert > Mate. In the PropertyManager; under Advanced Mates, click Profile Center . In the Mate alignment, click Anti-Aligned . To rotate the component, in Orientation, click Clockwise . In the PropertyManager; under Advanced Mates, click Profile Center .
How do you rotate gears in the same direction?
Because two gears that touch each other always rotate in opposite directions, gears also change the direction of that force. In order to obtain two gears that will rotate in the same direction, a third gear must be added to the system between the other two.
How do you use gears in Solidworks?
Gears in the GB Standard From the Windows Start menu, click All Programs > SOLIDWORKS version > SOLIDWORKS Tools > Toolbox Settings. From the Configure Hardware page, click GB, Power Transmission, and then click Gears. Select the required GB gears and clear the unnecessary ones. Close Toolbox Settings.
