Table of Contents
Is it possible to resurface a concrete driveway?
RE-CAP™ Concrete Resurfacer will renew your old, worn concrete driveways, sidewalks and patios at a fraction of the cost to tear out and replace old concrete slabs.
What is the average cost to resurface a concrete driveway?
How Much Does It Cost to Resurface a Concrete Driveway? Basic resurfacing starts at $2 to $3 per square foot. That works out to $1,200 to $1,800 for a 600-square-foot driveway and $1,500 to $2,250 for a 750-square-foot driveway, both of which are pretty common sizes.
What is the cheapest way to redo a driveway?
Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice.
How do I make my driveway look new?
There are several ways to make your driveway more appealing, possibly becoming the envy of your neighborhood. Pressure Wash. Repair any broken pavers or bricks, fill any cracks. Add a border. Staining concrete driveways. Upgrade your driveway. Improve your landscaping. Lighting. Decorative Mailbox.
Is resurfacing a driveway a good idea?
Although resurfacing can fix many badly damaged asphalt driveways, it is not a cure all. Some driveways have extensive damage that extends to the driveway’s foundation. With early detection and repair of any cracks or divots that develop, your new driveway could be virtually trouble-free for another 20 or more years.
What can you put over concrete driveway?
Resin Bound Driveway You can opt for a resin-bound driveway which involves mixing marble and stone together with a clear resin and then laying it onto a base, so that you end up with a very smooth, and permeable finish to the driveway.
Is concrete overlay a good idea?
They’re Strong and Durable Concrete is one of the strongest materials available for your floors. The decorative overlay consists of stain or pigments, so the floor remains as strong as ever. The floor coatings themselves are resistant to most damage, including stains and etching from chemicals or heavy equipment.
Can you epoxy coat a driveway?
Epoxy Works with Nearly Any Concrete Surface But really, you can use epoxy nearly anywhere. Many homeowners are even using epoxy coatings inside the home, in place of tile, linoleum, or carpeting. For outside, we recommend it for your garage floor, driveway, patio, and walkways.
How much does Tarmacing a drive cost?
How Much Does an Asphalt Driveway Cost? State/Territory Average Asphalt Driveway Costs New South Wales $45 per square metre Queensland $40 per square metre Northern Territory $30 – $40 per square metre South Australia $30 per square metre.
How can I save money on my concrete driveway?
Do-it-Yourself. Resurrect skills you learned over time to construct the concrete driveway on your own and save a bundle rather than hiring a company to do the job for you. Use Local Concrete. Go Green. Barter or Trade. Hire Students.
What is gravel driveway?
The gravel used for driveways is typically a processed product that consists of rocks, sand, and clay. While coarse gravel or stone paving is designed to let water flow through it, other types of gravel driveways are designed to shed water, much like solid paving materials such as concrete or asphalt.
Can old concrete be resurfaced?
Concrete resurfacing is a way to make old concrete look new again. A concrete coating is applied over the existing surface, offering a variety of color, texture and pattern options. This type of decorative refinishing can be done on driveways, patios, pool decks and even indoor floors.
How do you dress a concrete driveway?
13 Great Ways to Enhance Your Driveway Mix Materials. This home’s driveway is a multi-material showcase. Stamped Texture. A stamped finish can refresh a concrete driveway and its borders. Go Mod. Give It a Gate. Remove Barriers. Add Edging. Walk This Way. Pick New Pavers.
Does resurfacing driveway last?
Enhances your driveway’s appearance: one of the best values of concrete driveway resurfacing is it improves your driveway’s appearance. The new layer gives your driveway a fresh look after years of fading and cracking. Extends its lifespan: if you care for your driveway correctly, it should last for up to thirty years.
How many square feet does a 40 lb bag of concrete resurfacer cover?
One 40 lb (18.1 kg) bag of Concrete Resurfacer will cover approximately 17 ft2 (1.6 m2) of surface at a thickness of 1/4 in (6.4 mm) or approximately 90 ft2 (8.4 m2) per bag when applied at the minimum thickness with a broom or squeegee.
Can you put a thin layer of concrete over concrete?
How Thin Can You Pour Concrete Over Existing Concrete? The thinnest that is usually used when pouring concrete, in general, is about 2 to 2 ½ inches. That also applies to this pouring new concrete over old concrete. Any thinner than 2 inches would be too thin.
How long does concrete need to cure before resurfacing?
When waiting for concrete to dry, keep these timeframes in mind: 24 to 48 hours – after inital set, forms can be removed and people can walk on the surface. 7 days – after partial curing, traffic from vehicles and equipment is okay. 28 days – at this point, the concrete should be fully cured.
Can you coat cracked concrete?
If the chips in your driveway formed over time, skim coating and sealing the surface is a simple cosmetic solution. Skim coating weak concrete is only a temporary fix. Another option is to lay a thicker overlay and slow-dry the new surface.
Can you overlay concrete?
Yes, you may pour a concrete pad overlay over an existing slab. You need to consider the added height and weight of the overlay on the existing structure. Overlays may include polymers, portland cement concrete, or epoxies. You should improve the drainage of the slab by having a good slope on the overlay.
How thick should concrete overlay be?
The recommended thickness of a concrete overlay should be between 1 and 2 inches. Some people will even go to ¼ of an inch in thickness, which is still sufficient depending on your needs. If you place a 2-inch overlay, you need a very rough surface on the existing slab. Ensure the surface is rough enough.
What material is used for concrete overlay?
Polymer cement overlays are used for interior and exterior applications ranging from: Skim coat/broom finish concrete is resurfacing – Restore and protect damaged, pitted, flaking and stained concrete back to the look of a new concrete surface.
