Table of Contents
How much does it cost to reface a deck?
Average Cost to Refinish a Deck Average Cost $975 High Cost $1,360 Low Cost $600.
Do I need to strip deck before restaining?
Strip and Renew Wood Before Restaining Solid-color stains protect wood decks and look great when new, but even the best solid color deck stain eventually flakes and wears away. At that point, they need to be scraped and stripped off before the deck can be recoated.
How do I make my wood deck look new again?
SCRAPE OFF LOOSE FINISH SCRAPE OFF LOOSE FINISH. Remove loose paint or opaque deck stain with a paint scraper. SCRUB THE SURFACE. Use a stiff bristle brush to remove flaking stain or dirt. APPLY CLEANER. Apply a deck brightener/refinisher product to wood surfaces. POWER WASH DECK. APPLY FINISH. USE A BRUSH.
Can you sand an old deck?
Sand the Deck Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards. Use 60- or 80- grit sandpaper on the main deck boards, and use 80- or 100-grit on the handrails. After sanding, vacuum the deck thoroughly to ensure that dust does not settle on the new finish.
Can you just replace deck boards?
If your existing deck is old, shabby and a maintenance nightmare, you don’t have to tear it all down and start over. Chances are that the structural parts are still in good shape. If so, you can simply remodel it with new decking, rails and stairs, and save tons of money over the cost of a complete rebuild.
Can you use an orbital sander on a deck?
A random orbital sander is a specialized tool that sands wood in an elliptical pattern. It’s the most efficient sander to use when refinishing a deck, as they’re easy and practical to use.
How long does it take to resurface a deck?
A deck rejuvenation project like this can be done in two days, but it’s best to spread the work over two weekends to ensure the wood is completely dry before you apply stain.
Will pressure washing remove deck stain?
Pressure washing is a quick way to remove a deck finish, but it requires some care so as not to damage the deck. A pressure setting of 1500 psi should be strong enough to clean away deck stain. Hold the sprayer about 3 inches off the surface and move the sprayer as you work in the same direction as the grain.
How do you stain a deck that has already been stained?
Mix a solution of deck cleaner and water according to instructions and apply using a stiff brush. Work in manageable sections and rinse each area with clean water once it has been completed. Regardless of which method you choose, you will need to allow the wood to dry before applying the new coat of stain.
Should I sand or power wash my deck?
DO sand your deck before sealing. At that point, lightly sand the surface to remove splintery or fuzzy patches caused by pressure-washing the deck. A pole sander with 80-grit sandpaper will suffice; a power sander is overkill. Then seal the deck to protect from cracking, cupping, and warping.
What is the best wood deck restore product?
The best deck paint of 2021 Best overall: Kilz Over Armor Wood/Concrete Coating. Best to revive old wood: Rust-Oleum RockSolid 20X Deck Resurfacer. Fastest-drying wood stain: BEHR PREMIUM Transparent Quick Dry Oil Base Wood Finish. Highest rated: BEHR PREMIUM Porch & Patio Floor Paint.
How do you repaint a deck?
How To Refinish A Painted Deck Inspect deck surfaces for paint failures. If deck paint is holding, no need to strip old paint. Remove all peeling paint down to bare wood. Scuff sanding is good, even for old deck paint. Rinse off using low pressure garden hose. Let dry couple days.
What can I cover my old deck with?
DeckRite is a sheet material that comes on a roll, much like sheet vinyl flooring. It basically turns your old deck into an outdoor floor with no gaps in it and creates a watertight roof for the area beneath your deck. As long as your old deck boards are at least 5/4 thick and structurally sound, you can screw 1/2-in.
Is it worth sanding an old deck?
But for decks, sanding with a finer grit will smooth the deck wood to a point where it won’t absorb the stain or sealer efficiently. While this may seem like a small tip for restoring an old deck, it can save a lot of time and frustration.
Can I sand my deck by hand?
Most homeowners find it entirely possible to sand using an ordinary hand power sander, though patience is required, especially with a large deck that may need several days of work.
Can you lay new decking over old decking?
Yes, you can place any decking over an existing wood decking, even composites. When placing materials over existing decking, the latter can directly affect the former. In the case of wooden decking, if the existing floors are old and rotting, the new materials on top will have their lifespan reduced.
