Table of Contents
Can you resurface a cast iron tub?
For an average cost of $350 to $500—a fraction of the $1,200 to $5,000 expense of a new cast-iron or steel tub installed—refinishers can make an antique fixture look brand new. “Professional refinishing can be a cost-efficient solution for that retro look,” Trethewey says.
How do you revive a cast iron tub?
How to Restore a Rusty Cast Iron Bath Step 1: Clean the Bath. Clean the bath with liquid sugar soap and wipe dry. Step 2: Spray Paint the Bath. Wipe out the bath with a dry cloth and remove all fluff. Step 4: Touch Up. Every morning for a week, inspect the bath and see if it needs more paint.
Is it worth refinishing a cast iron tub?
The cast iron tub refinishing procedure also known as cast iron tub reglazing, not only is a viable alternative to replacement when the tub is old, stained, damaged, or simply doesn’t look good anymore but has become the number one choice for contractors nowadays when they are hired by a homeowner to remodel a bathroom May 13, 2021.
How much does it cost to Reglaze a cast iron tub?
Tub Resurfacing Costs by Material Fiberglass $300-$1,000 Porcelain $350-$600 Cast Iron $350-$600.
How much does it cost to Reglaze a bathtub?
$150 to $250 for resurfacing of a smaller basin/vanity. $250 to $400 for resurfacing of a larger basin/vanity. $400 to $600 for resurfacing of a bath. $1,500 to $2,000 to resurface and fully restore an antique/claw and foot bathtub.
Is Bathtub Refinishing worth it?
Bathtub refinishing is worth the money if your tub is in good working condition. The reglazing process can remove surface imperfections, like scratches, shallow cracks, and stains. But if your tub is old, leaking, or full of mold, reglazing is just a waste of money. You’ll have to buy a new tub soon anyway.
How do you make an old bathtub look new?
To keep a white fiberglass tub looking brand new, use a regular baking soda scrub: Sprinkle baking soda on stains. Spray with warm water. Leave 10-20 minutes. Scrub with Mr. Clean Magic Eraser or soft sponge. Rinse. Dry with a soft microfiber cloth.
What kind of paint do you use on a cast iron tub?
For a cast-iron or fiberglass tub, you can use acrylic urethane enamel, which may already come mixed for you, or you may have to mix it it, just depending on what kind of kit you purchased. For fiberglass tubs, you can also use a two-part epoxy paint instead of the acrylic.
How do you clean an old cast iron tub?
Absolutely! Vinegar is great for deep cleaning your cast iron bathtub. Use a soft sponge to coat the bathtub in white vinegar. Allow the vinegar to sit for five minutes and then coat the bathtub in baking soda and use the same sponge to scrub the surface of the bathtub.
How many times can you refinish a cast iron tub?
Refinishing can be done by professional installation or by using a do-it-yourself reglazing kit. Such repeated refinishing applications cannot be repeated indefinitely. Refinishing is regarded as a temporary fix in the best of circumstances, and two refinishing coatings are the most you can reasonably expect to apply.
How long does Reglazing a tub last?
The short answer is that a professional reglaze will last 10-15 years. The long answer is that there are other factors in prolonging the glaze and finish of your bathtub. Refinishing helps protect the integrity of your bathtub.
What is the difference between bathtub refinishing and reglazing?
So the main difference between the “bathtub refinishing” and “bathtub reglazing” is that the former refers to the entire restoration project and the latter refers to the commercial coating applied at the end of the process.
Can I Reglaze my bathtub myself?
Whether you have your tub refinished by professionals or recoat it yourself, all the work is done on-site. Surrounding materials, including tile, flooring, and all of the other elements, are masked off and left in place as the resin coating is applied.
Do it yourself Reglaze a bathtub?
Tub or Shower Refinishing: Basic Process Remove or tape drain and fixtures. Scrape the tub with a razor. Dull the surface with etching powder. Sand the surface. Clean with a tack cloth. Tape the caulking. Apply the primer. Apply the coating with a roller, then with a brush.
How do I know if my tub is steel or cast iron?
A stainless steel tub will make a ticking or clacking sound. A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of paint.
Does Reglazing a tub work?
If your existing bathtub is already in pretty good shape but is covered in minor stains, scratches or other surface imperfections, reglazing is a good option. It’s also ideal for certain types bathtubs. Acrylic bathtubs can also be reglazed, as long as they don’t have any significant issues.
Does Reglazing a tub smell?
What Are the Dangers of Tub Reglazing Fumes? The fumes from stripping a tub of its previous coating(s) can contain methylene chloride, a colorless liquid that smells similar to chloroform and emits VOCs, aka volatile organic compounds.
Can you Reglaze a tub a different color?
Bathtub Refinishing Also known as bathtub reglazing, this process uses special primers and compounds to cover your existing tub and tile. You can make it just about any color that you want, and we can even color match other elements of your bathroom.
Does painting your bathtub really work?
The answer is YES. Painting a bathtub isn’t something most people think to do. In fact, when I started telling people my plan was to paint my pink tub, they either asked how or thought it wouldn’t work. Well, I’m here to tell everyone who doubted me that it indeed worked and looks like a million bucks!Dec 7, 2019.
