Table of Contents
Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.
Can I Restain a table without stripping?
I did some research and found that Minwax Polyshades could be a good option for our new table. With Polyshades you don’t have to strip or sand the existing finish before applying. Here is what I used to refinish our table: Stain pen (I used Dark Walnut – we already had this pen to fix scratches on our floor)Jan 9, 2018.
Can I Restain my dining room table?
If the sticky spots remain, you can also try mineral spirits. Add a little bit of mineral spirits to a clean cloth and rub the sticky area.
Do you have to remove old stain before restaining furniture?
You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
Can you Restain wood table?
Brush the stain liberally onto the table, following the natural direction of the grain. Let the stain soak into the wood for just a few minutes before wiping it off with a clean towel. Let the table dry according to the directions on the stain’s packaging. Reapply the stain to reach the desired depth of color.
Can you stain over already stained wood?
Already Stained and Finished Wood If the object you’re hoping to stain has been sealed with a topcoat, you won’t be able to restain it, but you can go over it with a coating or a colored stain blend. To prepare, clean the wood surface with a strong degreasing cleanser and wipe it down with a damp cloth or sponge.
What happens if you stain over stain?
If one section dries and is then overlapped, you are effectively applying a second coat to that overlapped area, and this will lead to blotchy finish. If the stain pools during application, you are applying too much at once; cut back.
How can I refinish my table top without stripping it?
The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It’s actually not that hard to do.
How do I remove stain and Restain?
STEP 1: Prepare your work area. STEP 2: Organize the tools and materials. STEP 3: Pour the stripper in a smaller container. STEP 4: Apply a thick layer of stripper. STEP 5: Let it soak. STEP 6: Scrape the stain stripper off the wood. STEP 7: Wipe down the surface. STEP 8: Sand your surface.
What is a good stain remover?
Best Overall: OxiClean MaxForce Laundry Stain Remover Spray, 12 Fl. Best Gel: SHOUT Advanced Stain Remover for Clothes with Scrubber Brush. Best Wipes: SC Johnson Shout Instant Stain Remover Wipes. Best With Enzymes: Biokleen Bac-Out Enzyme Stain Remover.
Do you have to sand off old stain before restaining?
There’s no stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of PolyShades® (see step-by-step instructions provided in this Guide).
How do you prep a table for Restaining?
Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.
Can you Restain a table?
Actually, no—designers and woodworkers aren’t the only ones who can refinish a table. Once you’ve refinished your table, you can use all of your newfound knowledge on that one rickety dresser you have, on that could-be-really-great side table, on that hand-me-down sideboard. Go to town—here’s how to get it done.
Can I refinish just the top of a table?
Depending on the type of table top and finish you’re working with, you could get away with lightly sanding or repainting the table to give it a new look. We wanted to refinish a table top that had worn considerably over time. We successfully stripped the varnish and stain and refinished the table top over a few days.
How can I change the color of stained wood?
If you try to apply a light color of stain over the top of an existing dark finish, you won’t notice much difference. To completely alter the color of the finish, strip down the existing stain using a petroleum-based solvent. Once you’ve lightened the wood, you may add a lighter color of stain.
How do you refinish a table darker?
Wipe off any excess stain with a clean cloth and leave the piece to dry completely. Once it’s dry, lightly sand between coats with fine-grit sandpaper. Coat once for a light stain or apply additional coats to create a darker color. Use a clean cloth to apply a wood finish such as polyurethane or tung oil.
