Table of Contents
To reset an airbag on a silverado just put the key into the ignition and turn the switch to the on. Watch for the airbag light to turn on. It will stay lit for seven seconds and then shut itself off. After it shuts off, turn the switch off and wait three seconds.
How do I reset my service airbag light?
Conclusion – How to Reset Airbag Light Turn your ignition on and off. Restart your vehicle and do a test drive. Examine the passenger airbag switch. Inspect whether seat belts are fastened or working correctly. Verify that the passenger seat sensor is not applied. Use a scanner with an SRS or airbag light reset option.
Can you reset airbag light without tool?
In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals. Check the wiring system underneath the driver or passenger seat for any loose wires or corrosion in the connector plug. Spray the connector plugs with an electronic cleaner and restart your car.
How do I turn off the service airbag light for a 2005 Chevy Silverado?
Turn on the scan tool and select “Air Bag” from the main menu. Select the “codes” menu, then select “clear all codes.” Unplug the scan tool from the vehicle. Start up the engine and check to make sure that the air bag light is no longer on. The air bag system is now reset.
Why is my airbag light on Chevy Silverado?
If the Chevrolet airbag light stays on and won’t turn off, it is because the Safety Restraint System (SRS) has detected a problem with one of the airbag components. Two possibilities include damaged wires or low voltage.
What does it mean when your truck says service airbag?
The airbag light indicates that something is wrong with the seatbelts or airbags. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.
What do you do when your service airbag light comes on?
The best thing to do if your airbag light has come on is to take the vehicle to a mechanic right away. A mechanic can help you to deal with the airbag light by examining the system with the help of the car diagnostic internal system.
Can you clear an airbag code?
No, scanners cannot clear these codes. These codes are stored after a vehicle accident and are also known as crash data. Hard Codes require professional reset services like us.
Will disconnecting the battery reset the airbag light?
No, this information is stored in non volatile memory. The airbag light is usually on if there’s a problem with the system. Even if you could clear the code which is reporting that, if the problem isn’t fixed then it will just be detected again, and the light will come back on.
What scanner will reset airbag light?
Autel AutoLink AL619 OBD2 Scanner, ABS, SRS Airbag Scan Tool, Turn Off ABS, Airbag Warning Lights, Ready Test, Advanced Version of ML619.
Where is the airbag sensor on a 2005 Chevy Silverado?
The 2005 Chevy Silverado’s front airbag sensors should be mounted on the bottom of the front radiator supports. A sensor will be bolted to either side of the core and removeable after releasing a metal protective shield. The shield is secured by three-four15mm bolts. Gain access from underneath the vehicle.
How do you turn the airbag off in a Chevy Silverado?
How to Disable the Silverado Airbag Turn off the engine and take the key out of the ignition. Place the transmission in park and apply the parking brake. Insert the key into the passenger airbag “ON/OFF” switch. Turn the key to the “OFF” position and remove the key from the switch.
Can you drive with the airbag light on?
When the airbag light illuminates, it means that there is a problem with the system. Most likely, the airbag will not deploy in an accident because of this fault. Therefore, it is not recommended that you drive the vehicle until you have the system repaired.
How much does it cost to fix airbag light?
Number 1 — Reset Airbag Light You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
How do you reset the airbag light on a GMC?
Select “Body Control Module,” then “Codes,” then “Clear All Codes.” This will [turn off the airbag light](https://itstillruns.com/turn-off-airbag-light-7291521.html) on the GM’s instrument panel. Unplug the computerized scan tool and start the engine. Notice that the SRS light has shut off.
