Table of Contents
Select “Body Control Module,” then “Codes,” then “Clear All Codes.” This will [turn off the airbag light](https://itstillruns.com/turn-off-airbag-light-7291521.html) on the GM’s instrument panel. Unplug the computerized scan tool and start the engine. Notice that the SRS light has shut off.
How do I get my service airbag light off?
Conclusion – How to Reset Airbag Light Turn your ignition on and off. Restart your vehicle and do a test drive. Examine the passenger airbag switch. Inspect whether seat belts are fastened or working correctly. Verify that the passenger seat sensor is not applied. Use a scanner with an SRS or airbag light reset option.
Can you reset airbag light without tool?
In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals. Check the wiring system underneath the driver or passenger seat for any loose wires or corrosion in the connector plug. Spray the connector plugs with an electronic cleaner and restart your car.
How do you reset the service indicator on a Chevy airbag?
To reset an airbag on a silverado just put the key into the ignition and turn the switch to the on. Watch for the airbag light to turn on. It will stay lit for seven seconds and then shut itself off. After it shuts off, turn the switch off and wait three seconds.
How do you turn off the airbag in a GMC Sierra?
To turn off the right front passenger airbag, insert the ignition key into the switch, push in, and move the switch to the off position.
Why does my truck say service air bag?
The airbag light indicates that something is wrong with the seatbelts or airbags. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.
How do I turn off the service airbag light for a 2005 Chevy Silverado?
Turn on the scan tool and select “Air Bag” from the main menu. Select the “codes” menu, then select “clear all codes.” Unplug the scan tool from the vehicle. Start up the engine and check to make sure that the air bag light is no longer on. The air bag system is now reset.
What does it mean when the airbag light stays on?
5. Your Airbags May Not Deploy In The Event Of A Crash. The airbag light is an indicator that there is a problem with the vehicle’s Supplemental Restraint System. When this light comes on, it indicates that a problem has been detected in the system, and one or more airbags may not inflate in the event of a collision.
How much does it cost to reset the airbag light?
Number 1 — Reset Airbag Light You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
What can cause the airbag light to come on?
What causes the airbag light to come on? The airbag needs resetting. Corroded sensors. Depleted battery. Dislodged wiring. Faulty seat belt. Your airbag clock spring may need replacing.
How do you reset the airbag light on a GMC Terrain?
Use the arrow keys on the face of the scan tool to navigate the menu. Select “Body Control Module,” then “Codes,” then “Clear All Codes.” This will [turn off the airbag light](https://itstillruns.com/turn-off-airbag-light-7291521.html) on the GM’s instrument panel.
What scanner will reset airbag light?
Autel AutoLink AL619 OBD2 Scanner, ABS, SRS Airbag Scan Tool, Turn Off ABS, Airbag Warning Lights, Ready Test, Advanced Version of ML619.
Can you clear an airbag code?
No, scanners cannot clear these codes. These codes are stored after a vehicle accident and are also known as crash data. Hard Codes require professional reset services like us.
Can you drive with the airbag light on?
When the airbag light illuminates, it means that there is a problem with the system. Most likely, the airbag will not deploy in an accident because of this fault. Therefore, it is not recommended that you drive the vehicle until you have the system repaired.
Will removing fuse disable airbag?
If it has a fuse, will removing it disable the airbag? In most cases, removing an airbag fuse does not disable the airbag. This especially happens if the airbag deploys even when the power that drives it is cut off.
How do I turn off the airbag in my Silverado?
How to Disable the Silverado Airbag Turn off the engine and take the key out of the ignition. Place the transmission in park and apply the parking brake. Insert the key into the passenger airbag “ON/OFF” switch. Turn the key to the “OFF” position and remove the key from the switch.
Where is the passenger airbag switch?
The switch for the passenger airbag is located on the passenger end of the instrument panel and is accessible when the passenger door is open. Check that the switch is in the required position. ON – the airbag is activated and all front-facing passengers (children and adults) can sit safely on the passenger seat.
Can a blown fuse cause the airbag light to come on?
Blown fuses can definitely cause the airbag light to come on. When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.
