Table of Contents
Insert a paper clip, or a similar sized object, into the reset hole on the controller (depicted below). Using the paper clip, press and hold the reset button inside the reset hole for eight (8) seconds. If done successfully, the light strip will flash five times then cycle through the colors blue, green and red.
Why are my LED strip lights not working?
Bad Pin Connection – If your LED strip light fails to turn on at all, then check your pin connections. Most likely, the pin is not inserted correctly. In rare cases, the pin is faulty. If your RGB strip lights won’t change colors try flipping your strip light around and reconnecting it.
How do I reset my Smart Strip Light?
Press and hold the light switch controller for 10 seconds or more and then release. The light strip animating orange and green after that indicates a successful factory reset. Then you can reconfigure your light strip on the Kasa Smart app.
How do I get my LED lights to work again?
First of all, please disconnect your power source for safety. Then, you need to unplug the dimming cord from both the power supply and the LED strip light. Next, plug the power supply and LED strip back into the receiver unit and reconnect the power supply to power.
How do you fix LED lights that won’t turn on?
To troubleshoot, try the following steps: 1) Confirm that your power supply’s voltage and current rating are compatible with your LED strip. 2) Confirm that your power supply is working correctly. 3) Check and isolate other accessories on the same circuit. 4) Check for any visible loose connections.
How do I reset my LED WIFI strip?
press and hold the power button of wifi led controller for 5-6 seconds , then you can reset the light strip controller again.
How long do LED light strips last?
LEDs have an unbelievably long expected life-span, compared to both incandescent and fluorescent lights. With an average life-expectancy of some 50,000 hours, LED strip lights will still be burning bright in 17 years’ time, long after their traditional counterparts will have expired.
How do you fix dim LED strip lights?
Minimizing voltage drop and dimming First, minimize wire length wherever possible. This might mean running wire through a wall, or a ceiling, instead of going around a room – if possible. Second, make sure to use an adequately sized wire when making runs between your power source and light strip.
Why are half of my LED strip lights not working?
If half your LEDs are not working, it means that there are 2 strings of LEDs wired together in parallel – each parallel string has LEDs in series. You likely have a broken wire, or an LED bulb is broken or out of the socket.
What can go wrong with LED lights?
Most Common Problems with LED Lights Using the wrong current. LED bulbs overheat. Low quality solder and wire bonds. Improper use of LED lighting. Issues with color rendering. Existing fittings and fixtures are incomparable. Light Emitting Efficacy. Overly complicated circuits.
How do you fix an LED strip lighting controller that says the wrong color?
Step 1, Make sure all part of the LED strips kit are connects right and powered. Step 3, Press the “FADE7” button ,it will flash one second. Step 4, Turn on the LED strips again, press Red, Green, blue button one by one, it will change to its original color.
Why are my LED lights 2 different colors?
Over Heating. If LED strips are experiencing overheating, they can change colors; reputable brands have proper heat dissipation elements in their adhesive. Their adhesive has ceramic particles that can wick away heat from the strip and scatter it away from sensitive diodes.
How do I connect my LED lights to my phone?
How to Use Smart LED Strip Lights with EZ Mode Step 1: Download LampUX App. Android and iOS users can go to the App store and download LampUX App on your phone, then register an account. Step 2: Set Up the Smart LED Light Strip. Turn on the LED strip lights and wait for 10 seconds. Step 3: Connect the App.
Why are my LED lights not changing to the right color?
As established above, when LED strip lights don’t get enough cooling, they get overheated, and the diodes can change color. One of the biggest ways this can happen is poor air ventilation around the lighting setup. There is not enough space to carry away warm air and allow cooler air to circulate.
Is it okay to leave LED strip lights on all night?
Yes, LED lights are ideal for leaving on for long periods of time due to their low power usage and very low heat output. They are more suited to use as a night light/ background accent light in general. 23 of 25 found this helpful.
Can I leave LED strip lights on all night?
To put it simply, well-manufactured LED lights are extremely long-lasting and can be left on 24 hours, 7 days a week. This is because, unlike conventional types of light, LEDs produce minimal amounts of heat, which means they are unlikely to overheat or set on fire. In some scenarios, LEDs can and will fail.
Do LED strips burn out?
When they are connected correctly, smart LED strips rarely burn out. However, if too many strips are connected in series, this can lead to a circuit overload. The total resistance will be too high. This can lead to excessive heat being generated.
