Table of Contents
How do I reset my AutoCal V3?
Communicating with AutoCal V3 If AutoCal V3 does not power up within 10 seconds of a USB connection, you can reset AutoCal V3 by powering up FlashScan V3 via the OBDII connection.
How do you clear the code on EFI live?
Clearing Trouble Codes Turn your key in the “On” position (Not Running) Plug your SPADE into your OBD2 port. Scroll down to the Trouble Code option and press OK. Scroll down to Clear DTC’s and press OK. Press OK when you are asked if you are sure.
How do I unlink my AutoCal?
Tuners can manage unlinking of an AutoCal by physically unlinking AutoCal or by generating a Remote-Unlink Code that can be emailed to their customer. Refer to the FlashScan Link to AutoCal help file for more information. AutoCal End Users can also purchase the AutoCal Unlink product from the EFILive store.
What is EFI Live AutoCal?
EFILive’s AutoCal device is intended to provide a convenient platform for professional tuners to distribute custom tunes to their customers. It allows the tuner to update and optimize the original tune without shipping and/or removing controllers from customers’ vehicles.
How do I update my EFI live on AutoCal V3?
Click the [Check Firmware] button at the top of the window. Boot Block and Firmware versions, along with Configuration files are displayed. If a firmware update is available then the [Update Firmware] button will be visible. You should click that button to update the firmware in the connected device.
How do I check my EFI Live autocal code?
Plug it into the OBDII port, turn your ignition on – 2 clicks – scroll down to read DTC and press ok. It will list all your codes.
How do you clear codes on a Duramax?
With the Dodge trucks you can disconnect both batteries, both cables. Then hold the positive and negative cable together off one of the batteries for 10 seconds. This will completly drain the system and clear any codes that it may have. It should work the same with a Duramax.
Will EFI Live read codes?
With efi live deletes there will be no codes, emission components get turned off, or removed from the trucks brain. Just make sure to tell your tuner exactly you want done.
What is unlink AutoCal?
AutoCal customers may purchase an AutoCal Unlink code to unlink an AutoCal from a Tuner’s FlashScan. Once the device is unlinked, all tune files provided by that Tuner will no longer work.
How do I know if AutoCal is linked?
One you find the EFILive Control Panel, click on the “F7: Licensing” button. In the upper right corner of that page you’ll see the “Link FlashScan and Autocal” box. Click the Link button and the 2 devices will be linked.
How do I unlock my AutoCal?
You must either send your AutoCal back to the original* tuner or have the tuner send you an un-link code that allows you to un-link the AutoCal without sending it back. Either way you need the tuner who originally linked the AutoCal to agree to unlink the AutoCal.
How do I retune my EFILive?
Make sure to have EFI Live Scan and Tune installed. Plug in your AutoCal. Open EFI Live Scan and Tune. On the left hand side, click on F7: Licenses. A new window will open. Enter the Activation Code provided in your email from us. Change the License Number to match what was sent in your email.
Will EFILive delete DPF?
Registered. Yes EFILive can do DPF delete tuning.
Is EFILive Vin locked?
Your tune is vin locked. If you keep the autocal you can just buy another Vin license and buy updated tunes if you decide to use Ryan’s tunes on the new truck.
Is EFI Live software free?
Since the software is available for free on the EFILive website, what you are really purchasing is the license and the hardware.
What is V3 autocal?
SKU: EFILive V3 Autocal. The EFILive V3 Autocal is a scan tool for GM and Cummins vehicles. It also supports module flashing. Tuning is not included. This is only a scan tool used for diagnostic purposes.
Does EFI Live work on Mac?
No it does not. You would have to boot windows through your mac with parallels or something of that nature.
What does a DSP 5 switch do?
The CSP5 and DSP5 switches allows users to switch on the fly between 5 user defined tunes. With the DSP5 switch, you can change your tuning “on-the-fly”. Tuning not included, you must have DSP5 Tuning for use with this switch.
How do I connect FlashScan to AutoCal?
Remote Link AutoCal Connect your FlashScan device to your PC. Start the EFILive V8 Scan and Tune application. Open the Control Panel. Select the [F7: Licensing] option. Select [Link]. Click on the drop down of [Link] button and select [Generate Remote-Link Code]. Enter the serial number of the AutoCal to be linked.
How do you load music on AutoCal V3?
To move tune files and log files from AutoCal V3 to your PC; Connect AutoCal V3 to your PC. Open EFILive Explorer. Navigate to the directory on your PC where you wish to save the file. Navigate to: [F3: Data Files]. Select appropriate folder on your AutoCal device and drag the selected file to your PC.
How do you reset the ECM on a Duramax?
Remove the nut off the negative battery cable with a socket set or wrench. Slide the cable off of the battery and put it aside. Turn the headlight switch to the “on” position to drain the ecm of any remaining power. Wait at least 10 minutes, then turn it back to the “off” position.
How do you reset a Duramax after running out of fuel?
Prime the fuel system by turning the ignition on (Run position) for 30 seconds, but do not start the engine. This allows the pump to prime the system. Turn the ignition off, and then crank it for 15 seconds. If it does not start, repeat the first task and this one until it starts (cycle the key).
