Table of Contents
Can I replace garage door spring myself?
So faced with a broken garage door spring, the question is, can you fix it yourself? You absolutely can replace a garage door spring, but the type of springs you have may influence your decision. If you’re uncomfortable with any part of the process, simply leave the job to a garage door professional.
How much does it cost to replace a torsion spring on garage door?
Replacement torsion springs cost $30 to $100 each, and replacing them will cost $75 to $150 per spring, including labor and materials. Top-rated garage door repair experts are here to help.
Is it hard to replace a garage door spring?
How to Replace Extension Springs. Extension springs are generally considered much easier to replace. You can completely remove and replace the springs on your door without dealing with any amount of dangerous tension. Once you open the door, the springs will lose most of their tension and should be safe to work with.
How long does it take to replace garage door springs?
Replacing garage door springs takes 30 minutes to 1 hour, depending on the type and size of the garage door and number of springs. Old garage doors with several failing parts take up to two hours to replace. A garage door spring tune-up takes 10 to 15 minutes per door.
Can I open my garage door with a broken spring?
As professionals in the industry, we advise you do not attempt to open your garage door if the spring is broken. Extension springs on either side of the door, along the rails, help counterbalance the weight of the door as it is raised or lowered. Torsion springs across the top of the door help do the heavy lifting.
How long does a garage torsion spring last?
How long do garage springs last, typically? The average garage door spring, if correctly installed, should last about 10,000 cycles of opening and closing. If you only go in and out of your garage once a day, that means you should expect a broken garage door spring around 14 years after the spring is first installed.
Should you replace both garage door springs at the same time?
When replacing tension springs, it is recommended that both springs be replaced and matched because the older, unbroken spring will have lost some of its tension from years of use. Replacing both springs helps to balance the door so that it opens smoothly with equal force being applied to each side of the door.
What happens when garage door torsion spring breaks?
If the spring on one side of the garage door is broken, this might cause the door to become crooked as it moves up and down on its track. When the spring breaks, the entire system is thrown out of sync. The pulleys and cables might become loose and be left hanging down from the ceiling.
How many turns on a 9ft garage door spring?
A rule of thumb with springs is that four quarter turns equals a full revolution and the spring needs to be tightened a full revolution for every foot of door height (e.g. 7-1/2 foot door = 7 revolutions +2 (30 quarter turns).
How do I know what size torsion spring I need for my garage door?
Basically, you run a tape measure along the length of a spring, and take down the number of inches. Therefore, if your tape measure indicates that a torsion spring is 36 inches from one end to the other, that’s a 36-inch — or three foot — torsion spring.
What causes torsion springs to break?
The springs on your garage door system are responsible for the heavy lifting. When the garage door is lowered, the springs gain tension. When raising the garage door, tension is released and the spring assists with the lifting. As a result, most garage door springs break when the door is down.
What is the color code on garage door springs?
Garage Door Extension Spring DASMA Color Code Chart Color Pounds Kilograms Brown 60/160/260 xxx Orange 70/170/270 30/75/120 Gold 80/180/280 35/80/125 Light Blue 90/190/290 40/85/130.
How much does it cost to fix a broken garage door spring?
Garage Door Springs Cost Garage door spring repair costs an average of $250 for both materials and labor with a typical range between $150 and $350 which includes replacing two springs. For multi-door garages or installs needing other components replaced, you might pay up to $500.
Which is better torsion or extension springs?
Torsion springs tend to be stronger and more durable than extension springs. And though they are more expensive, they last longer, between 15,000 and 20,000 cycles as opposed to 10,000 cycles with extension springs. They also offer greater balance and show more control when moving, not jerking as the door moves.
How many springs should a garage door have?
As a rule of thumb, a single garage door takes one torsion spring. A double-wide garage door takes two springs. However, if you have an exceptionally heavy single door, you may need two torsion springs. It is easy to tell whether you have one or two springs.
