Table of Contents
How do you remove a toilet supply line?
The first step in actually disconnecting the toilet from the bathroom is to unscrew the supply line from the stop using a crescent wrench. Next, disconnect the tank to bowl nuts on the tank. Simply use a long screwdriver to hold them in the tank and then loosen them from the underside.
Are toilet water supply lines Universal?
Built to last this universal design fits all common toilets and valves. Size adapters are included with this supply line that fits 3/8 in. compression, 7/16 in. Replacing old, or leaking toilet connectors is easy with Fluidmaster’s universal toilet supply lines.
Are all toilet water supply lines the same size?
Typically they are 3/8” in diameter, but toilet supply line size can vary in length, usually anywhere from 9” to 20”.
What is the thread size on a toilet fill valve?
In addition, I have now learned that the thread is an old thread standard that is primarily used for toilet valves today. It is 7/8 inch Iron Pipe Size (IPS) thread.
What is the pipe that connects to the toilet called?
The pipe that connects a toilet pan to the wall or plumbing is called a flush pipe, and the rubber part on the end is called a flush cone. These parts can be replaced if they are broken or start leaking.
How do you remove PVC compression fittings?
Hold the fitting’s body in one hand and unscrew the loosened compression nut by hand. Slide the nut along the pipe. Pull the pipe away from the compression body. Slide the ring off the end of the pipe and discard it.
What does a saddle valve look like?
A saddle valve kind of looks like a horse saddle and fits over the water pipe similar to the way a saddle fits on a horse. The saddle valve is clamped on to a water pipe. Also known as a refrigerator water shut-off valve, most saddle valves are self-piercing.
How do you disconnect a copper water line from a refrigerator?
Use pliers to grab the metal nut on the end of the copper pipe where it connects to the back of your freezer. Twist the nut counterclockwise to loosen the connection, then pull the pipe out of the freezer.
Can a toilet supply line be too long?
You virtually never have a toilet and shut off valve exactly the distance apart that a line will fit exactly. Don’t overdo it, just go to the closest length and you’ll be fine.
What is a flex line plumbing?
Water flex lines are flexible water supply tubes or pipes that connect your plumbing fixtures or appliances to your home’s main supply pipes. These tubes conveniently connect your fixtures and appliances because they are easier to install than rigid pipings.
What size is the water inlet on a toilet?
The supply line to the toilet is standard 1/2-inch copper or plastic pipe routed from the main water line or a 1/2-inch cold water line. This standard is used throughout the home to supply faucets, showers and any other appliance requiring water, including the washing machine.
What thread is 7/8 Ballcock?
The so-called 7/8 ballcock thread appears to be a standard 15/16-14 UN thread.
Can compression fittings be removed?
You usually have to cut it off. Shut off the water to the pipe from which you are going to remove the compression fitting. Hold the male end of the fitting steady with a pair of adjustable pliers. Once the nut is loose, unscrew it by hand until the fitting separates.
How do you remove a compression shut off valve?
To remove a compression-style valve, hold the valve body with an adjustable or open-end wrench, or a slip-joint pliers. Grab the compression nut with another wrench and turn it clockwise to loosen it. Then pull the valve off the copper tubing. Next, remove the old compression sleeve and nut.
What is the standard size water supply line?
The main pipes, which come off the main water supply, typically measure 3/4 inches in diameter. The branch lines, which feed individual fixtures, typically measure 1/2 inch in diameter.
What size is residential water line?
In most cases, the main pipeline from the street to your home is either 3/4 or 1 inch in diameter, supply branches use 3/4-inch-diameter pipe, and pipes for individual components are 1/2 inch. Remember that water pressure decreases by a half-pound per square inch for every foot pipes extend above your water supply.
Do you measure pipe inside or outside?
In short: Tube is measured by outside diameter, pipe is measured by inside diameter. There is often confusion as to which size die the customer actually needs – Pipe Size or Tubing Size. Keep in mind that pipe size refers to a nominal – not actual – inside pipe diameter. Schedule refers to the pipe’s wall thickness.
Where is the water shut off valve for refrigerator?
The shut-off valve is usually located under the kitchen sink, in the basement, in a crawl space or in the cabinet next to the refrigerator. There will be a small 1/4 inch copper line attached to the cold water supply line using a saddle valve (t-valve).
How do you disconnect an ice maker water line?
Once you locate the refrigerator water line shut-off valve, pause. Prior to shutting off the valve, it’s a good idea to turn off the icemaker because otherwise it will continue to cycle on, which can damage the valve. When you’re ready to shut off the valve, simply turn it in a clockwise direction until it stops.
