Table of Contents
Can I replace a thermocouple myself?
1 cause of pilot lights that won’t stay lit is a worn-out thermocouple. It’s easy to replace and a new one costs $5 to $10. Then detach the thermocouple from the burner and take it with you to the home center or hardware store to ensure you buy the right replacement.
How do I know if my thermocouple is bad on my water heater?
If the pilot lights but the flame goes out as soon as you release the button after holding it for 60 seconds, then the thermocouple is bad. It’s possible to replace the thermocouple without removing the burner assembly, and many repair people do this.
Is it difficult to replace a water heater thermocouple?
Thermocouples are designed to detect a pilot light’s loss of heat and close the gas valve to prevent a gas leak. Replacing a thermocouple is a relatively easy fix that can take less than two hours.
How much should a plumber charge to replace a thermocouple?
Hot water heater repair cost Service Average cost to repair Leak repairs $100 – $1,000 Pilot light replacement $50 – $200 Pressure relief valve replacement $50 – $300 Thermocouple replacement $100 – $325.
What happens when thermocouple goes bad?
Normally when the thermocouple malfunctions or isn’t working, it simply shuts off the gas to your heater. This is important, particularly if the pilot light is out, because it prevents harmful gas from leaking into your home.
How do you diagnose a bad thermocouple?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
How do you troubleshoot a thermocouple?
Importantly, always make sure the tip of the thermocouple is directly in the pilot flame. If the tip is in the flame, you have held the nob on the gas valve down for longer than a minute, the pilot flame is strong and steady, and the pilot still does not stay lit, then you likely have a problem with the gas valve.
Who replaces thermocouple?
Honeywell, White Rodgers, and other manufacturers make universal replacement thermocouples, usually with a 30-millivolts (mV) rating for standing-pilot furnaces.
Are water heater thermocouples universal?
Universal Thermocouples. Universal thermocouples, as the name implies work on most water heaters. They are available online and in home supply stores for a reasonable cost. The length and the thread type are the two concerns when purchasing one.
Can you clean a thermocouple?
Yes, you can clean a thermocouple, but the task must be done with a light touch. Remove the thermocouple from the process assembly, using a steel wool or emery cloth, lightly clean the tip removing any build up.
What does a thermocouple do on a hot water heater?
Your thermocouple senses when your pilot light is burning. The tip of the thermocouple sits over the pilot flame, generating a voltage that keeps the gas valve open. If it senses that your water heater pilot light keeps going out, the thermocouple will shift off the gas supply to the heater.
Are all thermocouples the same?
Commercial thermocouples are interchangeable, economical, and supplied with standard connectors. Unlike most other temperature measurement devices, external form of excitation is not required for thermocouples because they are self-powered.
Why does the pilot light on a water heater?
The most common reason that your pilot light on your water heater keeps going out is a damaged, bent or dirty thermocouple.
Where is a thermocouple located on a hot water heater?
The thermocouple is part of the water heater’s burner assembly and is positioned next to the pilot light. It slides into a bracket and is held in place by a couple of clips. The thermocouple line runs outside the heater and is connected to the gas control valve, which is located on the outside of the tank.
How much does a water heater thermocouple cost?
Thermocouple – $20 to $150 The thermocouple is an apparatus that senses whether the pilot light is lit and triggers the gas control valve. Repairs typically cost about $150 to have it done professionally, though a new thermocouple itself only costs about $20 on average.
How do you clean a Rheem thermocouple?
Clean the thermocouple – using the emery cloth sandpaper, sand the ends of the thermocouple and then give it a finishing touch with the lint-free cloth. Hopefully, you can get to the ends of the thermocouple without having to detach it from the assembly, but you may have to do that.
Why does my pilot light keep going out after replacing thermocouple?
If your water heater pilot won’t stay lit even after replacing the thermocouple, you most likely have a faulty gas control valve. It is a sign that the valve is failing to open and allow gas to flow to the pilot. You could also be dealing with a tripped or faulty thermal switch.
Does gas go through a thermocouple?
A thermocouple is a safety device that’s used to detect whether or not your furnace’s pilot light is lit. This rod is connected to your furnace’s gas valve. When your pilot light is lit, the heat from the flame sends a voltage through the thermocouple that keeps the gas line open.
