Table of Contents
Is it easy to replace a toilet seat?
Installing a new toilet seat is an easy DIY project. Whether you’re replacing yours because it’s old, or because you just want a new style, all you need are some basic tools and a few minutes. Unbolt the old seat, then pop the new one in place using the hardware included in your new toilet seat’s box.
Do all toilet seats fit the same?
Do all toilet seats fit the same? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying.
How do I know what toilet seat will fit my toilet?
Measure the width of the bowl at its widest point. Measure the length of the bowl from between the seat bolts to the outer edge of the front of the bowl. Round bowls should have a length of about 16 1/2 inches and elongated bowls should be 18 to 18 1/2 inches.
How much does it cost to replace toilet seat?
The national average materials cost to install a toilet seat is $47.78 per seat, with a range between $28.25 to $67.32. The total price for labor and materials per seat is $133.78, coming in between $106.05 to $161.52. Your actual price will depend on your location, job size, conditions and finish options you choose.
Are toilet bowl seats universal?
Do all toilet seats fit the same? The simple answer is no, there are a range of different toilet seat fittings. Some are bottom fixing (fitted from beneath the fixing holes) and some are top fixing (usually required when there isn’t access to the bottom of the pan, e.g. with a fully shrouded toilet).
What are the different size toilet seats?
Toilet seats don’t come in sizes, but they do come in two different shapes: round toilet seats and elongated toilet seats, each of which correspond to two different toilet bowl shapes. Round toilet seats are still the standard in most homes, and they’re the toilet seats you typically see most often.
Are toilets universal size?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
How do you remove plastic bolts from a toilet seat?
If the bolts or nuts are plastic, they can’t corrode and will come off easily. Simply pry open the cover behind the seat to expose the bolt’s head. Unscrew the bolt with a pliers or a screwdriver while you hold the nut underneath with the pliers.
How do you take toilet seat off?
To remove the seat, hold the nut while unscrewing the bolt. Do one at a time. Make sure you have a screwdriver that is large enough to fit into the bolt groove. A small screwdriver will fail to grab the bolt groove and will strip the bolt.
What tool do you need to remove a toilet seat?
Toilet seats can typically be removed with either a screwdriver or a wrench. Please use caution, because your tools can easily chip the porcelain of your toilet bowl. Locate the nuts under the toilet tank and grip them firmly with pliers in one hand.
How do I know what size toilet I need?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
What is the difference between round and elongated toilet seats?
A round front bowl generally has a dimension of approximately 16.5″ from the seat bolt holes to the tip of the bowl. An elongated bowl is approximately 2″ longer, or about 18.5″. (Note: these dimensions can change from manufacturer to manufacturer, but there is almost always about a 2″ difference between the 2 sizes).
Will elongated toilet seat fit standard toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
Can a plumber replace a toilet seat?
For instance, replacing a toilet seat will take a handyman or plumber between 10 and 15 minutes while it might take you several hours the first time, i.e. when you buy the wrong shape seat and need to make a second trip to the store.
How much does a plumber cost to fix a toilet?
Plumber Cost To Fix A Toilet On average, it will cost from $45 to $197 to repair a toilet yourself or between $130 and $310 to have professional repairs done by a plumber. The hourly charge for a plumbing contractor is $72 to $82, which does not include parts or materials.
When should I replace my toilet seat?
When to Replace Your Toilet Seat The toilet seat is broken/cracked. The toilet seat is stained. The paint or finish is worn off. The hardware or hinges are broken. The color or design is outdated/ugly. The toilet seat is uncomfortable. You just don’t like it!.
Are toilet seat holes standard?
First, the distance between the two bolts that hold your toilet seat to your toilet bowl is standard across nearly all toilets, regardless of what kind of shape it has. These are called seat post holes and they should be about 5.5 inches apart from the center of one hole to the other.
Are toilet seats standard size UK?
There is no universal standard for toilet or toilet seat sizes in the UK. However, certain patterns have developed. The following combinations of toilet seat lengths and widths are relatively popular: width 35 cm, length 40-41 cm.
Can you replace a 14 inch rough-in toilet with a 12-inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
Can you replace a 12-inch rough-in toilet with a 10 inch?
A toilet with a 12-inch rough-in will definitely not fit into a space with a 10-inch rough-in, but a toilet with a 10-inch rough-in actually has extra space in a 12-inch rough-in space.
Are toilet bowls standard size?
Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″.
