Table of Contents
How do I measure for a replacement recessed medicine cabinet?
To get an accurate measurement, remove the cabinet door, then unscrew the cabinet from the framing. Measure the height and width of the cavity, as well as the available depth.
How can I update my medicine cabinet without replacing it?
Medicine Cabinet Makeover: how to update a medicine cabinet without replacing it Step 1: Remove the old light. Step 2: Build up the box. Step 3: Add the crown moulding to the top. Step 4: Add the new lighting. Step 5: Prime and paint.
How do you install an inset medicine cabinet?
What is the standard size for a recessed medicine cabinet?
When choosing the right medicine cabinet size, consider the width and height of your sink or vanity. For smaller sinks and vanities 18 to 24 inches wide, a 15 x 24-inch medicine cabinet is a good fit. For compact vanities 30 to 36 inches wide, a 20 x 24-inch medicine cabinet is a good fit.
What can I replace a medicine cabinet with?
To replace a recessed medicine cabinet, you need a drywall saw, a recessed-mount medicine cabinet with fasteners, and shims. Follow these steps for a professional-looking installation: Empty the old cabinet, take out the shelves and, in some cases, remove the door.
How do you fix a wall after removing a medicine cabinet?
How to Fix a Hole From a Medicine Cabinet Step 1: Cut the Top and Bottom of the Hole. Step 2: Cut Two Planks. Step 3: Cut the Drywall. Step 4: Apply Adhesive and Screw in the Drywall. Step 5: Add Drywall Joint Compound. Step 6: Sand and Add More Layers. Step 7: Sand and Paint.
Can I replace the mirror on my medicine cabinet?
Glass is fragile, so any number of accidents could crack or break your bathroom cabinet mirror. But there’s no need to replace the entire fixture if you can just substitute a new piece of glass for the old one. It’s an easy project for most DIYers and it could save you a little time and effort in the long run.
What do you do with a hole in a medicine cabinet?
What to do with medicine cabinet hole? You can cover the hole on the wall by filling it with wood filler or you can also use drywall putty. Once it is dried, you can sand it and paint it over with a color that matches the color of your existing wall.
Can you frame a medicine cabinet?
Medicine Cabinets When you order a custom frame, enter 1/4″ in the dropdowns for all sides on the Mirror Placement step. That way the frame will extend a bit beyond the edge of the mirror so from the side you will not see the mirror “sandwiched” underneath. Try it 1/4″ out from the door edge. Open the door.
How do you hang a medicine cabinet without studs?
To install a surface mount cabinet that isn’t on studs, use drywall anchors, toggle bolts or expanding bolts. If you can’t find strong enough drywall anchors for your cabinet, use toggle bolts. Follow these steps to use drywall anchors for a wall-mount cabinet: Put drywall anchors in the pilot holes.
What is recessed mounting?
Let’s start with recessed (or built-in) installation. This is when you create a niche in a wall and insert the back of the fireplace in it. It means that they can be installed directly against combustible materials like wood, walls, or paneling. Basically, zero clearance inserts can be flush mounted.
How deep is a recessed medicine cabinet?
Don’t forget to measure for depth: Recessed cabinets average about four inches deep, but you may be able to fit five or more inches. Adjustable shelves and mirrored interiors are useful amenities.
How much space should be between vanity and medicine cabinet?
They should be between 12 and 18 inches apart. If your medicine cabinet is wider than the space between your studs, you can still use it, but you’ll need a more custom installation.
Should vanity and medicine cabinet be same size?
Typically, your medicine cabinet or mirror should be narrower or the same width as the vanity. To determine the height, measure the distance between your lights and faucet. Choose a size that provides clearance above the faucet and below the lights.
How do you hide a medicine cabinet?
The easiest way to hide a medicine cabinet is to install a covering such as a framed picture in the door area. Remove the door from your medicine cabinet. Measure the space between the top screw of the bottom hinge and the bottom screw of the top hinge. Measure the length and width of the cabinet door.
How do you drywall a medicine cabinet?
Table of Contents Step 1: Locate Pre-Drilled Nailing Strips. Step 2: Find Studs Behind the Drywall. Step 3: Mark the Top of the Cabinet. Step 4: Drill Mounting Holes. Step 5: Drill Pilot Hole. Step 6: Use Anchors or Toggle Bolts if Needed. Step 7: Secure One Side of the Cabinet. Step 8: Level the Top and Secure the Cabinet.
How do you fill a recessed wall?
How to Enclose a Wall Display Niche Remove the shelves from inside the wall display niche. Measure the depth and the height of the niche. Cut two 2-by-2 inch boards to fit inside the niche. Mark the inside vertical edge of the niche 5/8 inch in from the wall’s edge every 6 inches on both sides of the niche.
How do you cover a hole in a medicine cabinet?
Apply mesh drywall tape over the seams and spread the joint compound (mud) over the tape to fill in any gaps. Apply multiple coats of mud if needed and heed the instructions on drying time. Once dry, sand the dried compound until the entire work area is smooth and flush.
Can you add a frame to a recessed medicine cabinet?
If mounting a recessed medicine cabinet without an existing frame, make sure to install a solid frame for the cabinet – including a header and footer – to make sure the wall is not compromised. Anchor the frame securely to the wall studs.
