Table of Contents
How much does it cost to replace a tub shower combo?
The average cost to replace a bathtub and surround is $1,500 to $11,000. Installation tends to run the least if you choose a combo with built-in shower and surround.
How hard is it to replace a shower tub?
Replacing an old bathtub with a new bathtub is a very difficult project. Much of the tile on the walls will be damaged during the removal. If the old tub is readily accessible, the project can move quickly. If you have to open a wall to remove the old tub and position the new tub, the task is much harder.
What are tub shower combos made out of?
Tub and shower combos are typically made from lightweight fiberglass or acrylic.
How much does it cost to convert shower to tub?
What Is the Cost of Converting a Walk-In Shower to Bathtub? On average, you should expect to spend around $125 per square foot when converting your walk-in shower to a bathtub. This will bring your total amount spent to around $3,000 to $5,000 on average—covering everything, including labor and materials.
Can you put a tub over an existing tub?
The benefits of fitting a shower or tub over the existing model are multifold. Using this method allows a fresh new surface for the bath space without requiring the removal of the old model. Complete removal of the existing tub can be a costly job on its own, let alone the cost of installation for a new shower or tub.
Is it cheaper to install a tub or shower?
Tubs are often cheaper to install. A tub will cost anywhere from $400 to $8,000, installed, whereas a shower ranges from $450 to $10,000. Standard bathtubs and shower stalls are at the low end, while whirlpool tubs and walk-in showers are pricier.
Can you replace a regular tub with a soaking tub?
How Small Can You Go? According to the National Kitchen & Bath Association, a standard bathtub is a minimum of 60 inches long and 30 to 32 inches wide. Unfortunately, any tub less than 32 inches is usually very shallow as well, making it unsuitable for a deep and relaxing soak.
Can you replace a tub without replacing tile?
The short answer is yes. The bathtub has a rim that goes up and under the tile and at least the first few rows of tile will have to be removed. There is a chance that the floor tile can be preserved but most likely it will be damaged when the tub comes out.
How do you update a bathtub without replacing it?
Below, we review some popular options for revamping your bathtub and giving it some much-needed pizzazz. (1) Reface the side of the bathtub with decorative elements. (2) Paint the exterior of your claw-foot tub. (3) Replace old caulk and reseal your tub. (4) Put new tiling around your tub.
Should I remove my bath for a shower?
As a result, if you are thinking about turning a bathtub into a shower, the short simple answer is no – you should avoid removing a bath at all costs to prevent devaluing your home. They also enable more shower options to be used too, including an electric shower or power shower for example.
Can you put a tub inside a shower?
A built in tub is one of the easiest to install and most maintainable types of tubs that can be placed inside a shower. This type of tub can be unique to each space by incorporating waterproof tiles on the floors and walls to go up the straight side (or sides) of the tub to create a seamless look.
Why put a tub in the shower?
Their collective aim is to prolong living in their existing homes. A wet room could make this easier. Dotter & Solfjeld Architecture + Design | When you put a tub in the shower, the “shower room” is typically more spacious and threshold-free. Careful placement of the tub could see its ledge doubling as a bench.
How much space does a shower tub combo need?
You will need a bit more space than a walk-in shower if you plan on installing a shower and bathtub combo for your bathroom. The standard bathtub dimensions are 32 inches wide and 60 inches long, so most bathroom and shower combos are 60 inches by 36 inches by 72 inches or 60 inches by 30 inches by 72 inches.
Can you replace a tub with a walk-in shower?
Replacing a tub with a walk-in shower is an especially popular project for the age-in-place movement, which stresses barrier-free living. Most bathtub aprons are at least 15 inches high, so replacing the tub with a more accessible walk-in shower is extremely popular for older homeowners.
Can you convert a tub to a walk-in shower?
When converting a tub to a walk-in shower, it’s best to install your new shower in the space left behind by your bathtub, since the drain lines and water supply will already be in place. Moving plumbing will add significant costs to the project, and you’ll need to hire a plumber to do the work properly.
