Table of Contents
How much does it cost to repair a weed eater?
Home Depot does repair lawn mowers and weed eaters for around $80 as of 2022, charging $40 for simple tuning. The typical wait time for a lawn mower repair from the Home Depot Rental Center can take 2-3 weeks, whereas stores without a center will complete the repairs offsite, taking 4-6 weeks.
Why is my Weed Eater not cutting?
This is usually caused by the build-up of grass and debris around the head. When the string doesn’t advance, the weed wacker doesn’t cut efficiently, and you may have to stop frequently and pull out the string manually until you have a chance to clean and lubricate the head.
Why does my Weed Eater vibrate so much?
Most string trimmers have a flexible drive shaft installed in their shaft housing, even if the shaft is straight. Trimmers can also vibrate when the connection between the flex shaft and the trimmer head is loose or worn or when the clutch is worn and isn’t fully engaging when you open the throttle.
Why has my electric strimmer stopped working?
The most common problem with a string trimmer is that the unit runs out of string. The string may also be twisted or loose on the spool. The trimmer may need lubrication and cooling fins or air passages may be blocked. A cordless trimmer’s battery or charger may be faulty.
How do I fix the head on my trimmer that won’t turn?
If the drive cable is broken or detached, the trimmer head will not spin. To inspect the drive cable, remove the engine assembly from the shaft and look to see if the cable is in its proper place. Reinstall the cable if it has slipped from its place. If the cable is damaged or broken, it should be replaced altogether.
Why do Edgers shake?
If the rubber of the belt becomes stretched, it can cause your machine to rumble, shake, or vibrate. These belts also run on a pulley system, and if these pulleys are not properly aligned, it can make your edger vibrate as well. A misaligned pulley system can be adjusted to eliminate the vibration.
Why does my strimmer wire keep snapping?
Usually this is the result of the cutting head being taken too close to objects, e.g. garden stones, paving edges, walls etc. The cutting line must be allowed to rotate freely and the correct diameter and type of line should be used.
How do I stop my strimmer line from sticking?
Using the Bump Technique Always tap the trimmer head on a soft surface, such as grass, and not on a hard surface, including concrete and wood, or you may damage the trimmer head. It’s better to bump the head more often than less often. A blade on the guard automatically cuts the line to the right length.
What is white lithium grease spray used for?
White lithium grease is used to keep components moving smoothly, free of friction and seizing. You can also apply it preventatively to protect against rust and corrosion. White lithium grease can be used to: Lubricate car door hinges.
What is OO grease?
Tweet. Share. Valvoline Semi Fluid 00 is a high-performance lithium grease made with mineral base oil and additives of the highest quality. This is an extreme pressure lubricating grease engineered to withstand unfavourable conditions and stress while keeping its stability.
How often should you grease Stihl trimmer?
Stihl recommends checking the grease level at approximately every 25 hours of operation.
Which is better silicone or lithium grease?
Because lithium grease is petroleum based, it’s not recommended for use around plastics and rubber where it’ll cause these to prematurely fail. Silicone grease, on the other hand, works better in low temperature, low stress applications around plastics and rubber.
Is wd40 a lithium based grease?
WD-40 Specialist® White Lithium Grease is ideal for metal-to-metal applications that require heavy-duty lubrication and leaves behind a rust-inhibiting barrier for protection against corrosion. This long-lasting formula won’t melt, freeze, or run in harsh weather conditions.
Does the color of grease mean anything?
One thing we are sure of, however – color does not denote a particular type of grease, whether it is red, green, blue or yellow. The color is simply a dye added by manufacturers for marketing purposes, to more easily distinguish the different greases in their product lines.
What is bentonite grease?
Grease based on Bentonite is an inorganic clay based grease for plain and rolling bearings operating at temperatures higher than those at which conventional soap based greases can be used. This Grease is mostly used for fans, plumber blades underground mining, plastic injection molders, etc.
What is corn head grease used for?
Corn Head Grease is a carefully formulated lithium 12-hydroxystearate grease with oxidation, rust and corrosion inhibitors, extreme pressure (EP) additives for anti-wear and heavy shock loading, and a special polymer to control oil separation during storage.
What is NLGI grease?
A grease with an NLGI grade of 1 has a consistency like tomato paste, where a grease with an NLGI grade of 3 has a consistency more like butter. The most commonly used greases, such as those used in automotive bearings, would use a lubricant that is NLGI grade 2, which has the stiffness of peanut butter.
How do you maintain a Stihl trimmer?
Clean the machine thoroughly, removing any grass and debris. Stihl recommends paying special attention to the cylinder fins and air filter. In addition, you may want to consider adding a fuel stabilizer to the trimmer’s fuel and running the engine to distribute the fuel throughout the fuel lines and carburetor.
How do you lubricate a gearbox?
3 Common Methods Of Gearbox Lubrication Grease lubrication. Grease lubrication can be used for industrial gearbox systems that are open or closed, as long as they run at low speeds. Splash lubrication. Spray lubrication. Professional gearbox maintenance services.
