Table of Contents
How do I remove a Bridge from Sonos?
Open the Sonos app for iOS or Android. From the Settings tab, tap System. Tap Bridge Removal in the Tools section at the bottom. Follow the on-screen steps to go through the Bridge removal process.
What do I do with my old Sonos Bridge?
Instead of bringing in old products and refurbishing or reselling them, Sonos tells users to bring them to an e-waste center or send it back to Sonos for component recycling. In recent days, however, Sonos quietly removed the recycle mode option from its app, replacing it with a prompt to call customer service.
Is Sonos Bridge obsolete?
Since Sonos announced that it will be dropping support for its Bridge (among other things), many users have wondered where that leaves them and their setups. Although the Bridge still works — and although it will until May 2020 at least — it is no longer mandatory.
What is a Sonos Bridge used for?
Sonos BRIDGE The BRIDGE is an accessory that plugs into your home router to create a dedicated wireless network exclusively for your Sonos system—providing you with reliable wireless performance no matter how large your home or how many WiFi devices you use.
Why is my Sonos Bridge incompatible?
This can happen if the product in question was powered off when the system updated to S2, then powered on again after the update was completed. The incompatible product cannot be used in the Sonos S2 app. You can reset the incompatible product to remove it from your system.
Do you need Sonos Bridge?
No you don’t need a bridge. You just need to download Sonos App on your Smart Phone (Iphone / Android) and configure it to work with your WIFI or Wired internet. Its not necessary to have a bridge to use sonos speaker. Sonos will setup its own network using your home network.
What replaces Sonos Bridge?
The Sonos Bridge was replaced by the Sonos Boost and the only time you should consider adding a Sonos Boost is for any of the reasons highlighted above. The Boost is generally not required for a Sonos system if your WiFi works fine at home.
How do I reset my Sonos Bridge?
All Sonos products except Move and Roam Unplug the power cord. Press and hold the Join button ( or ) while reconnecting the power cord. Continue holding the button until the light flashes orange and white. The light will flash green when the process is complete and the product is ready to be set up.
Does Sonos still support Bridge?
Smart speaker manufacturer Sonos clarified its stance when it comes to old devices that are no longer supported. If you use a Zone Player, Connect, first-generation Play:5, CR200, Bridge or pre-2015 Connect:Amp, Sonos is still going to drop support for those devices.
Can you resell Sonos?
Each can resell for $250 in good condition, but Sonos will dispose of them, according to Twitter user @atomicthumbs, who works at an e-recycling facility. Confirm in the Sonos app, and buyers instantly receive credit for 30 percent off any new Sonos product for each device they choose to upgrade.
How can I tell if my Sonos Bridge is working?
Open the Sonos app. Select Help. Select About My Sonos System. The About My Sonos System screen will display all of the Sonos products currently connected in your household, and whether they are connected to your home’s WiFi (wireless setup) or the dedicated Sonos network (wired setup).
Can I connect a turntable to Sonos?
If you have a turntable and third party speakers but no amplifier, you can connect them to the Sonos system directly using Sonos Amp. Just take the audio cable that comes with your Amp. Plug one end into the your turntable and the other end into corresponding colors of the L/R inputs at the back of your Sonos Amp.
What can I do with my old Sonos Play 5?
You had a few options when it comes to recycling; you can either take your old Sonos speakers to a certified e-recycling centre or a participating retailer, or printing off a pre-paid shipping label and sending your old speakers back to Sonos.
Does Sonos Bridge have a light?
During the setup process, you will be prompted to press and release the Join button on top of the SONOS BRIDGE. The indicator lights flash green and white while the BRIDGE is connecting. You may be prompted to update your Sonos system during this process.
Does Sonos Bridge need to be hardwired?
Sonos just announced a firmware update that eliminates the need for the Bridge, which had to be physically connected to a router with an Ethernet cable for any Sonos system to work. Now, you can connect to one or more Sonos speakers directly via Wi-Fi, with no hard-wired connection.
How do I connect my Sonos Bridge wirelessly?
Open the Sonos app and select Settings > System > Network > Wireless Set Up. This will guide you through the necessary steps. After entering your new WiFi password, you should then see a message saying your Sonos player is now set up on the new WiFi network.
Does Sonos Play 5 Gen 1 need a Bridge?
Since then, Wi-Fi has improved, and Sonos engineers started re-examining standard Wi-Fi use about three years ago. this means Sonos players – specifically Play:1 Play:3, Play:5 and Playbar – can connect by standard Wi-Fi with no need for an initial wired Bridge connection to the wireless router at all.
