Table of Contents
To fix well water that smells bad, use one of these approaches: Aerate water and/or inject air or oxygen. Chlorinate well water to eliminate both sulfur and bacteria. Use ozone gas in a closed tank or atmospheric tank. Inject hydrogen peroxide.
How do you get the smell out of well water?
Use a Chlorinator or Inject Hydrogen Peroxide to Kill Odors J-PRO Odor Killer Well Water Chlorinators Eliminate Both Odors and Odor-Causing Bacteria in your well water. Use 5% grade liquid bleach or 12% liquid pool chlorine OR 7% hydrogen peroxide. The same system can inject either bleach or peroxide.
Why does my well water smell so bad?
Hydrogen sulfide gas (H2S) can give water a “rotten egg” taste or odor. This gas can occur in wells anywhere and be: Naturally occurring – a result of decay and chemical reactions with soil and rocks. Produced by certain “sulfur bacteria” in the groundwater, well, or plumbing system.
Why does my well water smell like sewer?
Generally, a rotten egg (or sulfurous), decayed or sewage-like odor in household water is a result of bacterial activity, which can be due to: Bacteria growing in the drain: This is the most common cause of these types of odors. The bacteria can produce a gas that smells like rotten eggs or sewage.
Can I pour bleach down my well?
Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Pour it into the well without pumping.
How do you fix sulfur smell in water?
Chlorine bleach can effectively remove medium to high levels (over 6 mg/l) of hydrogen sulfide. The chlorine in the bleach chemically reacts with (oxi- dizes) the hydrogen sulfide eliminating the “rotten egg” odor. Chlorine bleach also reacts with iron or manganese, and disinfects water supplies.
How do I chlorinate my well?
Overview. Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.
Is it safe to drink well water that smells like rotten eggs?
In most cases drinking water that has a strong rotten egg odor, although particularly unpleasant, is perfectly safe to drink. However in some rare occasions the odor may be caused by sewage or other contaminates in a building’s water supply, which could cause health problems.
How much bleach is needed to shock a well?
4) Work out how much bleach will be needed: For every 50 gallons of water in the well use one quart of laundry bleach – (4 quarts in a gallon). Do not use excessive amounts of bleach – more is not more effective.
Why does my well water smell Swampy?
There are two types of bacteria that cause odors: sulfur- oxidizing and sulfur- reducing. Some sulfur bacteria form deposits that can clog a well screen and pump piping. Sulfur bacteria samples are difficult to collect and take a long time to analyze. You may wish to have your water tested for iron bacteria instead.
What is the best way to treat well water?
Shock chlorination is the process by which home water systems such as wells, springs, and cisterns are disinfected using household liquid bleach (or chlo- rine). Shock chlorination is the most widely recommended means of treating bacterial contamination in home water systems.
Is there bleach in city water?
Because public water sources are treated with chlorine, your drinking water can sometimes exude a smell similar to bleach. Small amounts of chlorine are added to public water sources and treatment plants to eliminate traces of bacteria, viruses and parasites as the water travels to its point of use.
Can I put a chlorine tablet in my well?
the well has been flooded or exposed to bacterial contamination in another manner, such as a crack in the well cap. Chlorine granules, tablets and liquid chlorine in the form of household bleach can all be used to disinfect your well.
What happens if you put too much bleach in well?
According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.
How do you neutralize the smell of sulfur?
Baking soda is well known for erasing odours. And the best thing is that it’s very easy to use and efficient too. If the smell is coming from your clothes then, soak them in baking soda before washing. You can also sprinkle baking soda in all the corners of your house to get rid of the sulphur scent.
Will a water filter remove sulfur smell?
Regardless of the source of the odors, installing whole house water filters that will remove hydrogen sulfide and kill sulfur bacteria is a good solution to consider if you want to reduce bad smells, and protect your family from other chemical and microbial contaminants.
How do you get rid of sulfur smell?
Treatment keep the affected area of skin clean and dry. use antiperspirant. wash regularly with antibacterial soap. use a deodorant to mask the odor.
How often should you chlorinate a well?
Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.
How much does it cost to disinfect a well?
To disinfect your well and eliminate the bacteria, you should chlorinate the well. You can hire a company that services wells to do the chlorinating. The cost ranges from $80 – $200.
How many chlorine tablets should I put in my well?
Drop the proper number of pool chlorine tablets into the well. For a 10-foot well use 2 tsp. of a chlorine tablet, for a 20-foot well use 1 1/2 tbsp. of a chlorine tablet, for a 40-foot well use 3 tbsp.
