Table of Contents
If you wish to remove the harp, for adjustment or replacement, first unscrew or otherwise remove the lamp finial above the lampshade, remove the shade, and gently squeeze the harp inward just above the harp base. The harp locks into the lamp via notched “legs” that slide into the short slotted arms of the harp base.
How do you convert a harp lamp to Uno?
How To Use an Uno Shade with a Harp & Finial Lamp 1 & 2. Unscrew the finial and then squeeze the harp to remove it. Pop the socket itself apart. Remove the top portion of the socket to reveal wire connections. Thread the wire through the ring of the uno shade and then through the socket cup.
How do you attach a lamp harp?
Hold the ferrules in the raised position while squeezing the base of the harp together. Insert the notched ends of the harp into the corresponding C-shaped channels of the saddle, which is the U-shaped piece mounted just below the lamp socket. Release the harp.
How do you replace a harp base?
Work on a comfortable table or counter top. Remove the socket cover by locating and pushing in on the spot marked “press” to loosen the socket. Loosen the screws and remove the wires on the sides of the socket, but leave the screws attached. Replace parts in reverse of the order in which they were removed.
What is the harp of the lamp?
Lamp harps are the metal wire lamp part that typically mounts below the lamp socket and supports your lamp shade (see Fig. 1).
What is a harp fitting lamp shade?
Harps are flexible, often U-shaped parts that fit over a lamp’s light bulb, simultaneously protecting the bulb and providing the support or attachment piece for the lampshade. Most often, a harp’s base – the harp saddle – is attached to the lamp beneath the socket.
Can you remove a harp base from a lamp?
If you wish to remove the harp, for adjustment or replacement, first unscrew or otherwise remove the lamp finial above the lampshade, remove the shade, and gently squeeze the harp inward just above the harp base. The harp locks into the lamp via notched “legs” that slide into the short slotted arms of the harp base.
What is a UNO socket?
What is an UNO Fitter? An UNO fitter is a large threaded ring in the middle of the fabric shades top tripod. It is designed to thread onto UNO sockets. UNO sockets have the same matching thread on their socket shell. The most common application for this type of shade and holder is the bridge arm floor lamp.
Can a harp be added to any lamp?
You can now easily attach a harp to a lamp without one. The opening on this adapter is 1 9/16 Inches. A plastic washer (ring) is needed to hold the adapter tightly in place. Please note, there are two fitter sizes (1 and 9/16 inch diameter and a smaller 1 and 7/16 inch diameter).
What is a spider lamp shade fitter?
1. Spider Fitter Shades. The spider lamp shade is the most common type of fitter for table and floor lamp shades. Spider fitters sit atop the lamp’s harp (the U-shaped metal part of a lamp that fits around and protects the light bulb). Once placed on top of the harp, spider fitters are secured to the lamp by a finial.
What size harp do I need for my lamp?
Guidelines for determining size of Harp Lamp Shade needed Bottom-diameter of Lamp Shade: approximately 1”-2” less than lamp-base height. Bottom diameter should not exceed lamp-base height.
How do I remove a lamp shade?
If your lampshade is lightbulb-accessible, follow these steps: Unscrew the lightbulb. Locate the mounting screws. Loosen the mounting screws with your screwdriver until the lampshade comes free. Carefully place the old lampshade down nearby and take your new lampshade up the stepladder.
What are the parts of a lamp harp?
A lamp harp is the component of a lamp to which the lamp shade is attached. It typically comes in two separate parts, a saddle which is fastened under the lamp socket, and the harp itself which consist of a lightweight frame attached to the saddle at its lower end and extending upwards to a point above the bulb.
What is a harp saddle?
A harp is the most common way that American lamps hold up shades. The harp saddle is built right into the lamp (under the socket cap), while the top is removable. We used harp saddles in every lamp in this lesson except the Bottle Table Lamp. ( smaller lamps work best with clip on shades).
What is the top piece of a lamp called?
Finials are decorative caps that fit over shades at the top of a lamp. They help secure the lampshade in place and complete the lamp aesthetics. Finials come in a variety of colors, materials and shapes and are most often used with spider fitters.
What is the part that holds the lamp shade called?
Base – this is the bottom part of the lamp, which holds the shade and bulb. On floor lamps it’s usually wide and flat, to support the height of the lamp.
Can you change lampshade fitting?
Here is how you can change the fittings on a new lampshade to make it fit. Now, you don’t actually have to buy a new lampshade to do this project. You could purchase pressure sensitive styrene, which is a flexible plastic material that you can adhere any fabric to, and then cut out a lampshade shape.
What are the types of lamp shade fittings?
There are three basic types of lamp shade fittings: spider fittings, uno fittings, and clip-on fittings: Spider Fittings: Spider fittings are the most common type of fitting for table and floor lamps and are used with harps.
