Table of Contents
How do you remove a gas fireplace box?
Take a crowbar and remove the trim around the insert. When you can access the gas line, remove it as well. Then, carefully wiggle the insert out of the fireplace and remove it. Finish the job by screwing a brass cap onto your gas line so you can turn your gas back on and it won’t leak out of the line.
How do you remove a built in fireplace?
Step 1: Remove the Trim. Using a hammer, mallet, or pry bar, you will want to remove the trim and any nails around the fireplace that is holding the insert in place. Step 2: Disassemble pipes and Vents. This is the step where you are disconnecting everything. Step 3: Pry the Insert. Step 4: Set it off to the Side.
What is the metal box in my fireplace?
What is a fireplace insert or box? A fireplace insert is a fireproof box that is surrounded by steel or cast iron. It can also be fronted by insulated glass. Steel or cast iron help trap heat where as some have blowers that push the hot air back into a room through vents.
Is it expensive to remove a fireplace?
If you need to remove the inconvenient or dangerous parts of a chimney or fireplace, you can avoid the massive cost of demolishing the entire system and structure. A partial chimney or fireplace demolition costs $500 to $2,000. A complete removal could run $4,000 to $6,000.
How much does it cost to remove a fireplace insert?
Cost to Remove a Gas or Electric Fireplace Insert When a professional takes out the insert alone, expect to pay between $250 to $600. However, you’ll need a plumber qualified to work with gas lines or an electrician to disconnect the insert from its fuel source. This will run an additional $100 to $300.
Can you remove fireplace insert?
A wood-burning fireplace insert must be removed when your fireplace and chimney enclosure need cleaning. Most wood-burning fireplace inserts are heavy and are secured to the enclosure with screws or bolts. If you don’t want to hire a professional to remove the fireplace insert, you can attempt to remove it yourself.
Is it hard to remove a gas fireplace?
For natural vent gas fireplace inserts located within masonry fireplaces, removal can be relatively straightforward once a professional has disconnected the gas.
Can you disconnect a gas fire yourself?
Can I remove a gas fire myself? To be clear, you should never attempt to remove a gas fire yourself. It is a legal requirement that this job is completed by a Gas Safe Registered engineer. The risks of tackling this as a DIY job include fire, and death through inhalation if you do not properly cap off the gas pipe.
Can you remove a fireplace without removing the chimney?
The demolition would involve opening up the wall and removing the fireplace from the framing that holds it in place. Once removed, you can either install another fireplace measuring the same size, or simply install supports for the chimney and cover the space up.
Can you remove a wood-burning fireplace?
Wood burning stoves are removed from homes for a variety of reasons. Upgrading to natural gas or other nonpolluting heat source may add to the value of the home. Removing a wood stove requires careful handling to minimize spreading gunk from the inside of the stove around the home.
What is a fireplace box made of?
Depending on what type of fireplace you have, your firebox could be brick or metal. Masonry fireplaces—which are built of bricks or other stone—typically have a brick firebox. If you have a prefab fireplace, your firebox is most likely made of metal.
What is the metal part around a fireplace called?
Andiron: Also known as a Firedog. These metal pieces support the logs inside the fireplace.
What is the small box inside fireplace?
A fireplace insert is a sealed box that is placed (inserted) into an existing masonry fireplace. As a result, the old inefficient wood fireplace is upgraded to a new high-efficiency wood, gas, or propane fireplace that will produce more heat and use less fuel.
How easy is it to remove a fireplace?
If it’s a wooden or tiled surround, it can be as simple as removing screws and lifting it away. You may need some help with tiled surrounds due to their weight. It’s also important to wear gloves and protective goggles if you choose to break them up with a sledgehammer.
Is it a good idea to remove a fireplace?
But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.
Can you remove a fireplace in the middle of a room?
Consider a partial fireplace removal Alternatively, you can leave the stack and remove only the fireplace and chimney breast (the part that protrudes into the room) below the roofline. Just note that a partial removal may require help from a structural engineer to ensure the building’s structure remains sound.
Can you remove old fireplaces?
Removing an old fireplace is relatively easy, but it’s likely to be a two-person job and quite demanding in physical labour. Lots of mess will be created too. You will probably need only a hammer and chisel plus crowbar or garden spade, but get someone to help with the lifting and lowering, to avoid injury.
How much does it cost to relocate a fireplace?
The average cost to move a fireplace is $3,000 to $10,000 or more, depending on the height, type of surround, and if it’s a pre-fab wood or gas fireplace, or site-built masonry fireplace. Moving a masonry fireplace requires demolishing the old one, repairing the wall, then installing a new fireplace.
Does a fireplace add value to a home?
A homeowner can often recover over 100 percent of the expenses associated with adding a fireplace upon selling their home. According to the National Association of Real Estate Appraisers, adding a fireplace to home can increase the resale value of the home by as much as 6-12 percent.
