Table of Contents
Read this article to learn to remove your tub effectively and efficiently. Step 1 – Shut off the Water Supply. Step 2 – Remove Drain Gate. Step 3 – Remove the Drain. Step 4 – Taking out the bathtub. Step 5 – Safety First. Step 6 – Break It Up. Step 7 – Clean Up.
How much does it cost to remove a clawfoot tub?
The national average materials cost to remove a bathtub is $12.63 per bathtub, with a range between $11.81 to $13.44.Remove a Bathtub: national average cost. cost to remove a bathtub National Avg. Cost (labor and materials) for 1 bathtub $102.09.
How much does it cost to remove a cast iron tub?
Cast Iron Tub Removal Cost. To remove a standard cast iron tub, you can expect to pay anywhere from $255-$395. Based on where the tub is location in the home or on the property, your cost could be more.
How do you remove cast iron claw tub?
How to Remove a Cast Iron Tub Directions Shut off the water supply to the tub. Open tub faucet to drain water remaining in supply lines. Remove screws securing the plate covering the overflow assembly. Work loose the lever hook and take it out. Take out the drain stopper.
Why are clawfoot tubs bad?
“It doesn’t butt up against the wall, so you get a lot of spillage and it can cause damage to your wall or can seep in and actually drip down from your bathroom to your lower level ceiling,” Jonathan Scott of HGTV’s Property Brothers, told PopSugar. Consider tiling bathroom walls or nixing a clawfoot tub altogether.
Can you scrap a cast iron tub?
If you have a cast iron sink or tub, it may very well be worth scrapping, especially if you can’t find some way of selling it to someone else. While you can find ways to repurpose a cast iron sink or tub, you may also need to get rid of it from your home.
How hard is it to remove a cast iron tub?
Cast iron tubs can weigh over 300lbs easily depending on the size, shape, and wall thickness, which makes them very difficult to remove.
How do you remove a cast iron tub without breaking it?
Whatever your goals are, you may be wondering what you can do to remove a cast iron tub without destroying it. Begin by placing a thick piece of plywood over the top of the tub. Then, disconnect the front, side, and rear walls of the tub. After that, you can disconnect the overflow and floor drains.
What will cut a cast iron tub?
The side-grinder with a 4.5” diamond blade is the only tool used when cutting a cast-iron tub.
How do I know if my tub is steel or cast iron?
A stainless steel tub will make a ticking or clacking sound. A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of paint.
How heavy is a cast iron tub?
Depending on its size, an iron tub can easily weigh 350-500 pounds or more when empty.
How do you move a clawfoot tub?
Work your way around the tub, lying the tub down gently on the moving blanket after each foot is removed. Wrap the moving blanket(s) all the way around the tub and secure with packing tape or duct tape. Make sure the tape doesn’t touch the tub itself, as it may leave residue that is difficult to remove.
What can I put under my clawfoot tub feet?
A small circle of leather or felt placed beneath each claw foot will prevent it from scratching. Or you can glue these materials to the bottom of large claw feet and cut their shape to fit the foot, making a protector that’s less visible from the sides.
Are clawfoot tub feet interchangeable?
Feet are not interchangeable. A tub for two would work best with a double ended clawfoot tub, while a single slipper clawfoot tub is only for one person. A double ended slipper clawfoot tub may accommodate two if the tub is long and wide enough.
How heavy is a clawfoot tub?
Tubs are heavy! Bathtubs of all kinds are heavy. A clawfoot tub can be made from acrylic, but a classic clawfoot tub is made of cast iron with a porcelain finish. An empty cast iron tub can weigh between 200 and 400 pounds. Add water and the weight on the floor will increase to between 500 and 900 pounds.
Does a clawfoot tub add value to a home?
According to the RealEstate.com survey, starter homes with claw-foot tubs sold for nearly 30% more than expected. Coffered ceilings also helped homes sell for 30% more than expected, and farmhouse sinks (thanks Joanna Gaines) helped homes sell for 26% more than expected.
What do the numbers on the bottom of a cast iron tub mean?
The cast iron is exposed on the outside and bottom of the tub, and although it may have been painted, the manufacturer’s stamp — if there is one — is often clearly visible. This number states the length of the tub in feet. Possibilities include 4, 4 1/2, 5, 5 1/2 and 6.
What can I do with an old cast iron tub?
The tub can be used as a planter, outdoor furniture, indoor furniture and many other transformations. Turn it into a planter in your garden. Transform it into an outdoor sofa. Transform it into a chaise lounge. Turn it into a couch. Upcycle it into a chair. Transform it into a coffee table and planter.
How do you cut an old cast iron tub?
The easiest and most versatile saw for this type of cutting is the reciprocating saw or “sawzall”. Blades are available up to nearly a foot in length, making it easy to cut most anything. Just don’t cut through the floor or your plumbing! Start with two cuts across the width of the tub, dividing the tub into thirds.
How much can you sell a clawfoot tub for?
The cost increases for any tubs smaller or larger than 5′ or for any tub that is unusual in any way – a wide, flat rim, a slipper-style tub, ornate feet, etc. A 5′ roll rim tub may sell for $50 while a 5′ French double-ended clawfoot tub may sell for $2000.
