Table of Contents
Is it easy to remove a fireplace surround?
If you have a more modern fireplace, such as a gas fire or electric fireplace rather than a period open fire, then removing an old fireplace surround shouldn’t be too difficult. However, it does require a little DIY skill to ensure you don’t make too much mess of your wall.
Can you remove fireplace facade?
To remove a fireplace surround, you’ll need to find what’s attaching it to the wall. With the screws removed, the fireplace surround can be removed from the wall. You can use a screwdriver or chisel to help pry the surround away from the wall if it’s stuck in place.
How do I remove a brick fireplace surround?
A brick or stone fire surround A real brick or stone fire surround needs to be removed brick by brick (or stone by stone). Wearing protective gloves and safety spectacles, use a hammer and cold chisel to chip away the mortar to loosen each brick/stone starting at the end of the top course, work your way along and down.
How hard is it to remove a fireplace mantel?
If you’re ready to change the look of your room, removing the mantel can create a new look instantly. If it’s screwed into the wall, use a screwdriver to loosen the screws and lift the mantel away from the wall, instructs Fireplace Universe. If it uses nails, pry it free from the wall using a pry bar.
Can I change my fireplace surround?
Replacing a hearth and surround—either with seamless tone slabs or with ceramic or stone tiles—makes a big difference in the way a fireplace looks. You can replace an old quarry-tile hearth and cover a brick surround with four sleek granite slabs, each 1¼ inches think.
How much does it cost to remove a brick fireplace?
If you need to remove the inconvenient or dangerous parts of a chimney or fireplace, you can avoid the massive cost of demolishing the entire system and structure. A partial chimney or fireplace demolition costs $500 to $2,000. A complete removal could run $4,000 to $6,000.
What is the wall behind a fireplace called?
Surround. Commonly confused for one another, the fireplace surround is an informal name given to the entire assembly of elements: mantel, legs, returns, etc. Ultimately, the surround is what makes up all parts of a fireplace in its entirety. The only exception to this would be the firebox itself.
Can you remove a fireplace in the middle of a room?
Consider a partial fireplace removal Alternatively, you can leave the stack and remove only the fireplace and chimney breast (the part that protrudes into the room) below the roofline. Just note that a partial removal may require help from a structural engineer to ensure the building’s structure remains sound.
Is removing a fireplace a good idea?
But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.
How easy is it to remove a fireplace?
If it’s a wooden or tiled surround, it can be as simple as removing screws and lifting it away. You may need some help with tiled surrounds due to their weight. It’s also important to wear gloves and protective goggles if you choose to break them up with a sledgehammer.
What are the parts of a fireplace mantel called?
The fireplace mantel comes in two major parts: the lower mantel and the optional overmantel. The main parts of a lower mantel include the shelf, legs, header, inner trim, and hearth. The main parts of the overmantel are crown and wall cladding tiles.
How do you remove floating mantel from drywall?
Work the pry bar between the edge of the mantel and the drywall, starting at the lowest point, and slowly push the mantel away from the wall. If you are removing a ledge-style mantel, work from the bottom. However, if you are removing a surround, working at the base of the fireplace upward is best.
How much does it cost to replace fireplace surround?
A stone fireplace surround usually costs between $3,000 and $7,500 but could run anywhere from $2,500 to $10,000 or higher. The surround refers to any part of the fireplace built with stone, or the area surrounding the firebox.
How hard is it to remove a brick fireplace?
Removing a brick fireplace can be a long and difficult job, but you can do it with a bit of experience and the right tools. As you reach the bottom, you can switch the tools you’re working with to finish faster. When you’re done, all you need to do is patch your walls to finish!.
Can you remove a wall with a fireplace in it?
Chimney breast walls, although sometimes there for cosmetics—are often constructed for structural support. If you want to rip out the wall, you’ll need a professional to give it a once-over, so you won’t cause irreparable damage to the rest of your home.
Can you remove old fireplaces?
Removing an old fireplace is relatively easy, but it’s likely to be a two-person job and quite demanding in physical labour. Lots of mess will be created too. You will probably need only a hammer and chisel plus crowbar or garden spade, but get someone to help with the lifting and lowering, to avoid injury.
What is my fireplace surround made of?
One of the most common materials used for fireplace surrounds can be wood. Wooden fireplace surrounds are common because of their ease of installation and affordability. Wooden surrounds can be lighter, and cheaper to construct and transport and so they can be less expensive compared to masonry surrounds.
