Table of Contents
Pound the bottom of the mantel shelf with a rubber mallet to separate it from the wall if it doesn’t release when you pry the base of the mantel away from the wall, advises Fireplace Town. Tap it gently, but with enough force to pull the nails from the wall. Once it’s loosened, pull out on the shelf to remove it.
How is a fireplace mantel attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. In this case any screws or nails may be located on top or beneath the mantel.
How do you remove a floating mantel from a brick fireplace?
How to Remove a Mantel From a Brick Wall Remove any decorative trim around the outside edges of the mantel. Insert the short end of an I-beam construction pry bar between the back edge of the mantel and a brick wall. Cut through the mounts with a reciprocating saw to release the mantel.
How much does it cost to remove a fireplace mantel?
The cost to remove a fireplace and chimney is $3,000 to $6,000, which includes demolishing the stack and breast, installing structural support, and repairing the walls, floor, and roof.Chimney and Fireplace Removal Costs. National Average Cost $4,500 Minimum Cost $500 Maximum Cost $10,000 Average Range $3,000 to $6,000.
How do you remove a wooden fireplace mantel?
Pound the bottom of the mantel shelf with a rubber mallet to separate it from the wall if it doesn’t release when you pry the base of the mantel away from the wall, advises Fireplace Town. Tap it gently, but with enough force to pull the nails from the wall. Once it’s loosened, pull out on the shelf to remove it.
How do you remove a wood fireplace insert?
Safety gloves and boots. Step 1: Remove the Trim. Using a hammer, mallet, or pry bar, you will want to remove the trim and any nails around the fireplace that is holding the insert in place. Step 2: Disassemble pipes and Vents. Step 3: Pry the Insert. Step 4: Set it off to the Side.
How do you remove an old mantle?
Place a pry bar along the side of the mantel and tap in place with the hammer if it is a full mantel. Begin at the top edge and pry the mantel off the side of the fireplace. Move the pry bar down the side length of the surround; tap the pry bar in place and pry the side piece off until you’ve removed the entire piece.
How do I remove a wall mantel?
Work the pry bar between the edge of the mantel and the drywall, starting at the lowest point, and slowly push the mantel away from the wall. If you are removing a ledge-style mantel, work from the bottom. However, if you are removing a surround, working at the base of the fireplace upward is best.
How do you remove a mantel from a stone fireplace?
Chip off the masonry around stone or brick corbels using a cold chisel and masonry hammer. Insert the tip of a pry bar behind the corbels. Tap the pry bar with the hammer to penetrate sightly. Pry gently until they loosen, and remove them.
Will removing fireplace decrease home value?
But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.
How easy is it to remove a fireplace?
If it’s a wooden or tiled surround, it can be as simple as removing screws and lifting it away. You may need some help with tiled surrounds due to their weight. It’s also important to wear gloves and protective goggles if you choose to break them up with a sledgehammer.
Can you remove a fireplace in the middle of a room?
Consider a partial fireplace removal Alternatively, you can leave the stack and remove only the fireplace and chimney breast (the part that protrudes into the room) below the roofline. Just note that a partial removal may require help from a structural engineer to ensure the building’s structure remains sound.
How much does it cost to remove a brick fireplace?
If you need to remove the inconvenient or dangerous parts of a chimney or fireplace, you can avoid the massive cost of demolishing the entire system and structure. A partial chimney or fireplace demolition costs $500 to $2,000. A complete removal could run $4,000 to $6,000.
How do you remove a fireplace hearth?
Remove Old Hearth Use demolition hammer with a chisel bit to chip away old hearth and the mortar underneath (as shown). Leave concrete hearth base and firebox floor in tact. Brush and vacuum debris and dust from hearth base. Tip: Wear eye and ear protection and a dist mask when using a demolition hammer.
Can a fireplace insert be removed?
A wood-burning fireplace insert must be removed when your fireplace and chimney enclosure need cleaning. Most wood-burning fireplace inserts are heavy and are secured to the enclosure with screws or bolts. If you don’t want to hire a professional to remove the fireplace insert, you can attempt to remove it yourself.
