Table of Contents
Safety gloves and boots. Step 1: Remove the Trim. Using a hammer, mallet, or pry bar, you will want to remove the trim and any nails around the fireplace that is holding the insert in place. Step 2: Disassemble pipes and Vents. Step 3: Pry the Insert. Step 4: Set it off to the Side.
How much does it cost to remove a fireplace insert?
Cost to Remove a Gas or Electric Fireplace Insert When a professional takes out the insert alone, expect to pay between $250 to $600. However, you’ll need a plumber qualified to work with gas lines or an electrician to disconnect the insert from its fuel source. This will run an additional $100 to $300.
How do you remove a fireplace insert surround?
To start removing one of these fireplace surrounds, you will have to chip away the plaster around the edge of the mantelpiece. This should reveal the lugs holding it to the wall. You can then go about removing the screws, which should start to release the surround from the wall.
Can you remove a fireplace by yourself?
Removing a fireplace or a chimney is certainly a job you can do yourself. The reason for removing a fireplace may vary, but many reasons may be that extra space is needed, the fireplace is damaged or you just do not use it often enough.
Can you remove a wood-burning fireplace insert?
A wood-burning fireplace insert must be removed when your fireplace and chimney enclosure need cleaning. Most wood-burning fireplace inserts are heavy and are secured to the enclosure with screws or bolts. If you don’t want to hire a professional to remove the fireplace insert, you can attempt to remove it yourself.
Can you replace a fireplace insert?
Now is a great time to consider replacing that outdated unit with a modern option that is crafted to last for decades to come. Our Fireplace Xtrordinair® wood and gas inserts offer an economical solution to upgrade your current insert and become the heart of any room.
How do I remove a brick fireplace surround?
A brick or stone fire surround A real brick or stone fire surround needs to be removed brick by brick (or stone by stone). Wearing protective gloves and safety spectacles, use a hammer and cold chisel to chip away the mortar to loosen each brick/stone starting at the end of the top course, work your way along and down.
How easy is it to change a fireplace surround?
The fire surround is often the easiest place to start, as you don’t need to worry about gas pipes or brickwork. Here, some paint, new accessories or even a whole new surround can go a long way when you need an easy fireplace update.
How easy is it to remove a fireplace?
If it’s a wooden or tiled surround, it can be as simple as removing screws and lifting it away. You may need some help with tiled surrounds due to their weight. It’s also important to wear gloves and protective goggles if you choose to break them up with a sledgehammer.
How do I completely remove a fireplace?
The fireplace removal process Remove or cover furniture. Check whether the chimney breast supports any of the house’s framing. Seal off doors to protect from dust. Dismantle brick-by-brick, using a cold chisel and hammer. Chisel out the mortar and remove the bricks to at least one foot below the roofline.
Is removing a fireplace a good idea?
But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.
How do you remove a factory built fireplace?
Inspect the facing around the fireplace to determine your course of action in removing the surrounding structure. Pry three-board facing from the wall with a pry bar. Pulverize existing tile with a hammer. Bore through mortar and brick around the perimeter of the prefab fireplace with the reciprocating saw.
How do you remove a fire grate?
Lift the grate out of the fireplace and set it down on the painter’s plastic. Wrap the plastic around the grate to keep ash from falling. Move the grate to wherever you need it to go.
How much does it cost to replace a wood-burning fireplace insert?
Most fireplace inserts and a professional installation cost about $2,000 to $4,000, depending on the state of your existing chimney and the model you select.
How long does a fireplace insert last?
However, when properly maintained, a fireplace insert can last 20-30 years or more, making them a great investment in the future of your home.
How do you convert a wood-burning fireplace to electric?
All you need to do is remove the grate from your wood-burning fireplace and clean out the ashes and old wood. Once it is clean and ready, simply slide your electric insert into the firebox. Plug the unit in, and you are ready to sit back and enjoy your new fireplace.
When should I replace my fireplace insert?
Like all technologies, fireplace inserts do improve over time. If your insert is more than 20 years old, you stand to benefit from upgrading your outdated insert.
Are fireplace inserts worth it?
Are Fireplace Inserts Worth the Money? Savings: Fireplace inserts can help you to cut down on your heating bill. A fireplace insert is not recommended as a sole use of heating but when used in conjunction with turning down your thermostat, can save you money on your heating bill.
