How To Remove A Clawfoot Tub

Read this article to learn to remove your tub effectively and efficiently. Step 1 – Shut off the Water Supply. Step 2 – Remove Drain Gate. Step 3 – Remove the Drain. Step 4 – Taking out the bathtub. Step 5 – Safety First. Step 6 – Break It Up. Step 7 – Clean Up.

How much does it cost to remove a clawfoot tub?

The national average materials cost to remove a bathtub is $12.63 per bathtub, with a range between $11.81 to $13.44.Remove a Bathtub: national average cost. cost to remove a bathtub National Avg. Cost (labor and materials) for 1 bathtub $102.09.

How hard is it to remove a cast iron tub?

Cast iron tubs can weigh over 300lbs easily depending on the size, shape, and wall thickness, which makes them very difficult to remove.

How do you remove a cast iron tub without destroying it?

Whatever your goals are, you may be wondering what you can do to remove a cast iron tub without destroying it. Begin by placing a thick piece of plywood over the top of the tub. Then, disconnect the front, side, and rear walls of the tub. After that, you can disconnect the overflow and floor drains.

How much does it cost to remove a cast iron tub?

Cast Iron Tub Removal Cost. To remove a standard cast iron tub, you can expect to pay anywhere from $255-$395. Based on where the tub is location in the home or on the property, your cost could be more.

Why are clawfoot tubs bad?

“It doesn’t butt up against the wall, so you get a lot of spillage and it can cause damage to your wall or can seep in and actually drip down from your bathroom to your lower level ceiling,” Jonathan Scott of HGTV’s Property Brothers, told PopSugar. Consider tiling bathroom walls or nixing a clawfoot tub altogether.

Can you scrap a cast iron tub?

If you have a cast iron sink or tub, it may very well be worth scrapping, especially if you can’t find some way of selling it to someone else. While you can find ways to repurpose a cast iron sink or tub, you may also need to get rid of it from your home.

How do I know if my tub is steel or cast iron?

A stainless steel tub will make a ticking or clacking sound. A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of paint.

How heavy is a cast iron tub?

Depending on its size, an iron tub can easily weigh 350-500 pounds or more when empty.

What will cut a cast iron tub?

The side-grinder with a 4.5” diamond blade is the only tool used when cutting a cast-iron tub.

Can you break a cast iron tub with a sledgehammer?

Break the tub apart with a sledgehammer if you don’t want to keep or sell it. Start by covering the cast iron with a heavy blanket or towel. Put on some goggles and a long-sleeve shirt and use a 16 lb (7.3 kg) sledgehammer to break the tub apart until it’s in smaller pieces.

Can you cut on cast iron?

Solid cast iron can come in the form of griddles, old fireplaces or even wood-burning stoves. But when cutting through solid cast iron, a saw or cutting tool with a diamond saw blade is the best choice to make a cut in a straight line.

How do you break cast iron?

Hit the back of the chisel with a hammer. Move the chisel along the cast iron pieces while striking it with the hammer until the larger pieces break. Continue with the chisel and hammer until the cast iron breaks into manageable pieces.

Can you replace a bathtub yourself?

Upgrading your bathtub can drastically improve your bathroom’s appearance and your family’s comfort. Removing a bathtub and installing a new one is an approachable task for many. If you carefully prepare and work with a helper, you can complete this DIY project in one day.

How heavy is a clawfoot tub?

Tubs are heavy! Bathtubs of all kinds are heavy. A clawfoot tub can be made from acrylic, but a classic clawfoot tub is made of cast iron with a porcelain finish. An empty cast iron tub can weigh between 200 and 400 pounds. Add water and the weight on the floor will increase to between 500 and 900 pounds.

Does a clawfoot tub add value to a home?

According to the RealEstate.com survey, starter homes with claw-foot tubs sold for nearly 30% more than expected. Coffered ceilings also helped homes sell for 30% more than expected, and farmhouse sinks (thanks Joanna Gaines) helped homes sell for 26% more than expected.

What do the numbers on the bottom of a cast iron tub mean?

The cast iron is exposed on the outside and bottom of the tub, and although it may have been painted, the manufacturer’s stamp — if there is one — is often clearly visible. This number states the length of the tub in feet. Possibilities include 4, 4 1/2, 5, 5 1/2 and 6.

What can I do with an old cast iron tub?

The tub can be used as a planter, outdoor furniture, indoor furniture and many other transformations. Turn it into a planter in your garden. Transform it into an outdoor sofa. Transform it into a chaise lounge. Turn it into a couch. Upcycle it into a chair. Transform it into a coffee table and planter.

How do I sell a clawfoot tub?

Here are a few places where you may be able to sell your tub. Local antique dealers. Scrap yards. Newspaper or Magazine Classifieds. eBay. Craigslist. Facebook Marketplace.

Are old cast iron baths worth anything?

It’s a real shame but true – an old fashioned, nice n’deep cast iron bath makes a lovely place to relax, but don’t tend to be worth anything. Compared to the bits of pressed tin that are the norm these day, it’s outrageous!Feb 27, 2008.

How much do old cast iron tubs weigh?

Cast iron bathtubs typically weigh between 240 and 500 pounds; however, the actual weight depends on the size and type of bathtub. Alcove cast iron bathtubs are usually 60 inches long, hold 32 gallons of water, and weigh 320 pounds on average.

How do you carry a heavy bathtub?

If you are moving the tub along a flat surface with few stairs, a furniture dolly is recommended. Furniture dollies hold up to 1,000 pounds and are ideal for moving large items such as marble tubs. However, if you have a lot of stairs to move the tub up or down, an appliance dolly may be the better option.