Table of Contents
Can you remove a chimney flue?
The correct flue and chimney pot will need to be identified before any work can start. A double banked chimney stack is easier to work with than a single banked one. Removing a flue from a single banked chimney stack is almost impossible to do without damaging other flues within the stack.
How do you remove a flue pipe?
Put on some gloves and grab the pipe with both hands. Twist it back and forth. If it will not twist, bump it side to side with your palms until you hear a gritty sound, which means you have broken the creosote from the inside. Twist it back and forth again until it moves slightly.
Can I remove the chimney from my house?
External chimney stack removal can be done from outside the building and, if done carefully, need not disrupt any internal decoration. An internal chimney breast can be removed at ground and/or first floor without having to remove the external stack. The flooring may also need updating to fill the reclaimed space.
How do you remove a chimney damper?
Every damper has a pivot point where the chain or handle will allow the damper to open or close. Locate the pivot point and see if the damper flapper can be lifted out of the guides. If you are unable to lift the flapper out of the guides, you will need to cut them out using a grinder with cut off wheel.
Do you need building regs for chimney removal?
The chimney stack You won’t need a building regulations application to just remove the stack above the roofline. However you will need a building regulations application to remove all of the chimney stack throughout the house as the stack may support walls, floors or the roof structure.
How do you remove a wood burner flue?
To disconnect chimney pipes, locate the first pipe connection. You should see screws or rivets on the bottom or “female” pipe end, which holds the top or “male” pipe end in place. Using a screwdriver or ratchet wrench, loosen the screws or rivets. Locate the second pipe connection and do the same.
How do you remove a log burner flue?
How to Remove Wood Burning Stoves Open the doors of the wood stove to sweep out ash and remove any wood inside. Close the dampers to prevent residual ash from falling onto the floor when you move the stove. Spray lubricant around the pipe connection with the stove and let it set for at least 10 minutes,.
How difficult is it to remove a chimney?
Realistic Goals. You should keep in mind at all times that chimney removal is a lengthy, difficult process which can potentially lead to serious structural concerns. It is best to have several people working on the project at once, and having experts on-hand may significantly reduce the risk of complications.
Is it a good idea to remove a chimney?
WARNING: While it is possible to remove a chimney yourself, it isn’t a good idea unless you have home improvement experience, you’re comfortable performing manual labor up on your roof, and you have a helper nearby to assist you and maintain safety as much as possible from the ground.
Is it a good idea to remove a fireplace?
But losing a fireplace can affect a home’s appeal and possibly even its resale value, real estate pros say. A fireplace can particularly be viewed as a valuable amenity in colder climates, and removing one could even reduce the number of buyers drawn to a property, some agents say.
Is a damper and flue the same thing?
A damper is located in the flue of your chimney. The flue is where the smoke escapes when the fire is going. Dampers are placed inside of the flue to help control ventilation.
How do you open a fireplace flue?
You should turn the knob clockwise, as far as it can go, or push the rod all the way up to open the damper. If there is a metal chain in or besides your fireplace, it means that your chimney has a top-mounted damper. If the chain is tightly attached to a hook, the damper is closed.
Is the damper open or closed?
Visually Check A visual check is one of the surest ways of checking whether the damper is open or not. Simply stick your head in the fireplace and look up. If you have a throat damper, the closed damper immediately above your head will block your vision. If you can’t see daylight at the top, the damper is closed.
Do I need a structural engineer to remove a chimney breast?
If you discover that the chimney breast you want to remove is real, then you will almost certainly need to contact a structural engineer. Actual chimney breasts form part of the structure of a house – once removed, the addition of support beams may need to be incorporated to support any masonry above.
How much does it cost to remove a brick fireplace?
If you need to remove the inconvenient or dangerous parts of a chimney or fireplace, you can avoid the massive cost of demolishing the entire system and structure. A partial chimney or fireplace demolition costs $500 to $2,000. A complete removal could run $4,000 to $6,000.
