Table of Contents
How hard is it to remove a cast iron tub?
Cast iron tubs can weigh over 300lbs easily depending on the size, shape, and wall thickness, which makes them very difficult to remove.
Can you cut a cast iron tub with a Sawzall?
The easiest and most versatile saw for this type of cutting is the reciprocating saw or “sawzall”. Blades are available up to nearly a foot in length, making it easy to cut most anything. Just don’t cut through the floor or your plumbing! Start with two cuts across the width of the tub, dividing the tub into thirds.
How do you remove a cast iron tub without breaking it?
Whatever your goals are, you may be wondering what you can do to remove a cast iron tub without destroying it. Begin by placing a thick piece of plywood over the top of the tub. Then, disconnect the front, side, and rear walls of the tub. After that, you can disconnect the overflow and floor drains.
How much does it cost to remove a cast iron tub?
Cast Iron Tub Removal Cost. To remove a standard cast iron tub, you can expect to pay anywhere from $255-$395. Based on where the tub is location in the home or on the property, your cost could be more.
How heavy is a cast iron tub?
Depending on its size, an iron tub can easily weigh 350-500 pounds or more when empty.
Can I break a cast iron tub?
Break the tub apart with a sledgehammer if you don’t want to keep or sell it. Start by covering the cast iron with a heavy blanket or towel. Use a reciprocating saw to cut the tub into pieces if you don’t want to damage your flooring. You can also use a combination of a saw and sledgehammer for great results.
What can I use to cut cast iron?
When cutting cast iron, it is best to use a snap cutter, angle grinder, or reciprocating saw. If you are using an angle grinder or reciprocating saw, you should use a diamond blade to maximize effectiveness without wasting standard metal blades that would be ruined if used on cast iron.
How do I know if my tub is steel or cast iron?
1) Remove the overflow cover and popup lever from the head end of the tub and look at the edge of the hole. You should see black cast iron or bright steel. Also, if you remove the overflow cover, the material between it and the plumbing will be about 1/4 ” thick if it is cast iron. 1/16″ if it is steel.
How much does it cost to rip out a tub?
Cost to Remove and Install a Bathtub Task Average Cost Range Remove Tub $50 – $100 Dispose Old Materials $100 – 4200 Fix & Prepare Surface $300 – $800 Bathtub $200 – $14,000.
What is the average cost to remove a bathtub?
The national average materials cost to remove a bathtub is $12.63 per bathtub, with a range between $11.81 to $13.44. The total price for labor and materials per bathtub is $102.09, coming in between $65.26 to $138.91. Your actual price will depend on your location, job size, conditions and finish options you choose.
How much does it cost to remove tub and install shower?
Removing your bathtub and installing a shower costs $1,200 to $7,950. Although most of the expense comes from placing the new unit, getting the old one out can take time and require a few repairs.
How heavy is a bath tub?
Plastic bathtubs can weigh as little as 50 pounds empty, while a cast-iron bathtub can top 1,000 pounds.
How much does an average bathtub weigh?
What is the average weight of a porcelain Tub? Small porcelain bathtubs or those measuring around 45-55 inches long will tend to have a water capacity of 32 gallons and weigh about 250 pounds. Medium sized bathtubs, or those around 60 inches long will weigh around 320 pounds.
Is a cast iron tub worth keeping?
if it’s in good condition, keep it. cast iron tubs are wonderful, and hold up better than the acrylic tubs that you can get now. they hold heat better too, if you want to soak.
Can you break cast iron with a sledgehammer?
Strike the covered cast iron with a sledgehammer. Lift the tarp. Strike the cast iron roughly in the area of noticeable fractures. Continue to strike and inspect the cast iron until it has broken into pieces.
Can you cut a porcelain bathtub?
Can Any Tub Be Cut? Generally, yes! While porcelain can be very fragile, the proper saw and the techniques of an expert will ensure the tub is cut cleanly and evenly. Whether you have a bathtub built right into the tile, mounted on a deck, or with whirlpool features, any type of tub can usually be cut.
What can I do with an old cast iron tub?
The tub can be used as a planter, outdoor furniture, indoor furniture and many other transformations. Turn it into a planter in your garden. Transform it into an outdoor sofa. Transform it into a chaise lounge. Turn it into a couch. Upcycle it into a chair. Transform it into a coffee table and planter.
Can you cut a bathtub?
A tub cut-out is a quick and economical option for converting a standard bathtub into a “step-in” shower or bathtub. During this process, a portion of the sidewall of an existing bathtub is removed and a watertight composite insert cap is placed over the cut-out.
Can you cut cast iron with a multi tool?
An oscillating multi-tool tool is tremendously versatile and excels even on cutting cast iron. Okay, it may probably take a bit longer but it works where its rivals would be a nightmare including tight corners and the narrowest of spaces.
Can you cut cast iron with a cut off wheel?
Cutting cast iron using an angle grinder is a quick and painless operation that should only take a few minutes. Here’s the exact method for cutting through virtually any section of cast iron pipework. Fit your metal cutoff disc or diamond wheel to your angle grinder using the ratchet tool to tighten it.
How do you cut a heavy cast iron pan?
A circular or miter saw with a metal cutting blade. The angle grinder is probably going to be your best bet for making cuts in the cast iron piece. The grinder offers the best option for getting the cuts where you want them and keeping them relatively smooth.
