Table of Contents
How Can I Restart My Pilot Light? Step 1: Turn off your furnace. Step 2: Locate your gas valve. Step 3: Hold down the red button. Step 4: Light the pilot light. Step 5: Let go of the button. Step 6: Turn your gas back on. Step 7: Turn your furnace back on.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
How do I know if my boiler pilot light is out?
How to Tell If the Pilot Light Is Out Locate the front cover panel on your furnace. It should be a little door that’s easily visible. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color.
How do I get the pilot light back on my boiler?
How do you relight the pilot light on a boiler? Turn the gas to ‘pilot. ‘ Press and hold the reset switch for one minute and hold a flame to the pilot light at the same time. If all is working as expected, return any casing/doors and turn the gas from ‘pilot’ to ‘on.
How do I relight the pilot light?
Turn the knob to “Pilot” and hold down the “Reset” button. Using a long lighter, bring the flame close to the pilot opening. This should ignite the pilot light.
How much does it cost to relight a pilot light?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
Why won’t my boiler pilot light come on?
If the boiler is not igniting, there is a possibility the valve is blocked, seized or there is damage in the wired connections. No Pilot Light: When the boiler is not igniting and the pilot light has gone out, this usually means debris has blocked the jet. This could prevent the boiler from firing up.
What would cause a pilot light to go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Why would my pilot light go out?
Improper Venting & Airflow Sometimes a pilot light can go out as a result of some source of wind or air simply blowing it out. If this happens, there could be an issue with how your flue pipe is set up or how your system is venting.
Does gas still flow when pilot light goes out?
If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.
Can you manually light a gas hot water heater?
Lighting a water heater is simple, no matter what type you have. Most newer models of gas water heaters have a simple ignition switch. In just a few steps the water heater is lit, no problem. If you’ve moved into an older house, though, you many have the kind of water heater that needs to be lit manually.
Should the pilot light always be on in a gas furnace?
Most furnaces with electronic ignition have a device called a hot surface igniter. The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
Should the pilot light always be on in a boiler?
The pilot light is the blue flame that always stays lit under your boiler. The pilot light must always stay on or gas will easily escape. If the pilot light keeps turning off, then your boiler is not working. Older combi boilers may sometimes have pilot lights that flicker off, but can be restarted easily.
Is the pilot light always supposed to be on?
Generally speaking, it is safe to leave your continuous pilot light on at all times, assuming it stays lit (more on this in a moment). While it does cost more to keep your pilot light on in between uses, it can actually have some benefits to your system.
How do I stop the wind from blowing out my pilot light?
You can prevent a faulty pilot light from wind by fixing your thermocouple, gas release, protecting against downdrafts, capping your chimney, and checking your firebox cover.
Why did my water heater pilot light go out?
Your thermocouple senses when your pilot light is burning. If it senses that your water heater pilot light keeps going out, the thermocouple will shift off the gas supply to the heater. Over time, thermocouples can malfunction, accumulate dust buildup, or the device can get bent away from the pilot light’s flame.
Is it safe to light a pilot light?
Is relighting a pilot light dangerous? Relighting a pilot light is potentially dangerous. If the flame blows out, the gas won’t stop coming in the pilot light tube and will continue to escape without igniting. As it continues to collect in your room, lighting it could set off an explosion.
How do you reset the pilot light on a water heater?
Turn the knob to “Off,” and then wait five minutes for the gas to clear before you follow these steps: Open the door/cover over the pilot light access. Use a flashlight or a headlamp to find the burner inside. Turn the gas knob to “Pilot,” press and hold it down. While still holding the gas down, light that pilot.
