Table of Contents
How do I light the pilot on my gas fireplace?
Lighting a Gas Fireplace With a Control Panel Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights.
Why won’t my gas fireplace light up?
If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.
Can I light my gas fireplace with a lighter?
Flame-Lit Pilot Light Turn on the supply line to the gas fireplace. Light a match or butane candle lighter and hold it near the burner in the fireplace. Turn the gas key to release gas to the burner. Pull the match or light away when the burner lights.
Can I relight my own pilot light?
Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.
What do I do if my pilot light won’t light?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Can you manually light a gas fire?
You can still manually light nearly every modern gas stove with a match or lighter, even if the igniter is broken. Matches are safer and will work better than typical cigarette lighters.
Do all gas fireplaces have pilot lights?
It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”. The best way to determine if you have this type of gas fireplace is to look at the control knob of the fireplace. On a fireplace you will normally find the control knob behind the grate or door.
How does gas fireplace switch work?
The wall switch sends an electrical signal to your fireplace to open a valve and release the gas for the pilot light to light it. Without power most fireplace valves will not open.
How much does it cost to relight a pilot light?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
Does gas still flow when pilot light goes out?
If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.
Will gas leak if pilot light is off?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
How do I turn my gas back on after disconnecting?
You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.
Why would pilot light go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
How much does an igniter for a gas fireplace cost?
The average price to fix a fireplace igniter is between $85 and $150. Igniters are key components in gas units.
How much does it cost to keep pilot light on fireplace?
The average fuel consumption of your standing Pilot light is: Natural gas is $0.60 a day = $219 a year. Liquid Propane is $1.80 a day = $657 a year. Sophisticated fireplace manufactures like Travis Industries have developed Intermittent pilot light systems.
Why won’t my gas fireplace turn on when I flip the switch?
What can happen over the years, is that the connections inside the switch can get dirty, corroded, or broken, causing a loss of this voltage at the switch. So by the time the small amount of voltage gets sent back to the fireplace, it is not enough to signal the fireplace to turn on.
Why does my gas fireplace have a light switch?
The wall switch of a gas fireplace works protects the gas valve from accidentally turning on. It is a safety measure associated with a pilot flame and a thermopile.
Should the pilot light always be on in a gas furnace?
Most furnaces with electronic ignition have a device called a hot surface igniter. The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
