Table of Contents
Step-by-Step: Refinishing a Jewelry Armoire Step 1: Buy spray paint. Step 2: Place piece on paint-friendly surface. Step 3: Sand out impurities. Step 4: Wash off sanded wood. Step 5: Cover hardware. Step 6: Spray, baby! Step 7: Let it dry. Step 8: Remove tape from hardware, touch-up, and enjoy!.
What can I do with an old jewelry box?
Other used for a jewelry box or jewelry armoire: repurpose it into an organizer for all small crafting supplies: screws, washers, beads, washi tape, and more! Paint it with chalk paint and stencil the drawers for a unique and pretty look!.
How do you clean an old jewelry box?
Use a cotton swab (perhaps one that has been dampened) and get dirt and dust out of the corners. You can also use a damp cloth to pick up dirt. It may also help to use compressed air on hard-to-reach areas, or try carefully vacuuming with a small vacuum attachment. Many jewelry boxes are made of wood.
How do you paint an old jewelry box?
So, how do you paint a jewelry box? To paint a jewelry box, you must first take off existing hardware. Then use spray paint, chalk paint, or other furniture appropriate paint, getting in all of the nooks and crannies. Spray paint is the fastest method and can provide a nice, even finish.
How do you decoupage a jewelry box?
What to do: Give your box a good clean and then spray with your paint. Measure the inside of your box and cut two pieces of wood, which will slot inside and create compartments. Glue the wood inside your box with wood glue and leave to dry. Glue your chosen images onto the box using your PVA glue.
What kind of fabric is used in jewelry boxes?
Natural fabrics like cotton, silk, and wool are the best choices because they don’t contain any harmful chemicals. Velvet made from silk, rayon, or cotton (commonly called velveteen) is a good choice. It usually has deep pile to cushion fine jewelry. You can see the look of a velveteen lining in the main photo.
What is the fabric in jewelry boxes?
velveteen. Velveteen is soft and touch comfortable , which is most common and suitable for making jewelry boxes’lining , it have many levels and each kind of price will have some difference . velveteen lining makes jewelry boxes looks much luxury , and it’s soft can protect jewelrys from damage .
How do you get fabric out of a jewelry box?
Go over the velvet lining with a lint roller to remove any dust, lint or other small particles. Fill a small bowl with warm water. Dip an old toothbrush or a fingernail brush into the soapy water. Dab at the velvet with a clean, soft cloth to absorb the water and dry the fabric.
How do you get the musty smell out of a jewelry box?
Vinegar is safe for jewelry box materials and neutralizes musty smells. Sponge the interior and exterior of the jewelry box with the vinegar to kill any remaining mildew spores and remove the stains. Rinse the sponge as needed. Apply more vinegar and continue until the materials on the jewelry box have been cleaned.
How do you clean a metal jewelry box?
#1 Soap + Water Fill 2 small bowls with warm water. Add 2 – 3 drops of mild dish soap to the 1st bowl. Dip the corner of a soft cloth into the water + soap mixture. Rub the cloth along the jewelry. Using a soft-bristle toothbrush, rub any excess grime away. Dip the stainless steel jewelry item into the 2nd bowl to rinse it.
What is the best finish for a wooden box?
Three great finishes (that aren’t polyurethane) Danish oil: Smooth and easy. Make it satin smooth. Lacquer: Fast and fine. Brush it on. Not all foam is created equal. Shellac: The natural choice. Understanding “cut”.
How do you varnish a wooden box?
Finishing Wood Trim With Stain and Varnish Step 1: Project overview. Sand. Step 2: Begin by sanding. Photo 1: Sand with the grain. Step 3: Clean the room. Step 4: Brush on the stain and wipe it off fast. Step 5: Brush on a sanding sealer. Step 6: Sand the sealer before varnishing. Step 7: Finish up with oil-based wood varnish.
How do you make a Jewellery box Wikihow?
Take a piece of cardstock and cut out a 10 cm by 10 cm square. Use fabric glue to adhere it to the bottom of the jewelry box. You can choose whatever color of cardstock you like. But remember that it will be the visible bottom of the jewelry box, so make sure it is a color/design that you are comfortable with showing.
What paint can you use on a wooden box?
A common question you may have when decorating wooden boxes is: what paint do you use? I love using spray paint because it gives me the smoothest finish but you can also use acrylic and latex paint.
How do you sand a wooden jewelry box?
If painting an unfinished wood jewelry box, begin by lightly sanding rough areas and edges with a fine grit sandpaper. When the entire surface feels smooth, dust lightly with a damp cloth to remove sawdust before priming. If upcyling a prefinished jewelry box, sanding will allow new coats of primer and paint to adhere.
Is Linen good for jewelry?
Linen, on the other hand, is a much more eco-friendly display material but is vulnerable to wear and tear and not as durable as the burlap material because it can become dull color-wise as time passes. Otherwise, these materials make for the best possible display for jewelry in any jewelry shop.
What material do you use to line a box?
Here is what else you’ll need to line your box: Foam core or cardboard. Rotary cutter and cutting mat/straight edge set, or scissors and Exacto knife. Hot glue gun and Hot glue.
Is velvet good for jewelry?
Only use high quality, velvet lined or soft cloth storage for your expensive pieces and heirloom quality jewelry. This will offer the most protection. The jewelry should be kept out of direct sunlight and each piece should be wrapped individually or placed in it’s own protective compartment.
How do you clean velvet chokers?
Steps to Clean the Velvet: Vacuum the curtain to remove as much dirt and dust as possible. Mix a small amount of dish detergent with water and agitate well. Use a sponge or soft cloth to apply only the suds to the surface of the velvet. Blot to remove.
