Table of Contents
Clean. Any refinishing furniture DIY starts with basic cleaning. Examine. Take an overall assessment of the piece and determine if it needs any repairs. Remove the Old Finish. Sanding. Chemical Stripper. Seal the Wood. Stain or Paint. Apply Finish.
How do you refinish wood that has already been stained?
If the object you’re hoping to stain has been sealed with a topcoat, you won’t be able to restain it, but you can go over it with a coating or a colored stain blend. As an alternative, you could color the wood with an oil-based paint, but the opacity of the oil-based paints can hide the grains.
Can you stain over stained wood?
If you are unhappy with an existing wood stain you can stain over it, provided that you are willing to go a shade darker. Applying a light stain to a dark stain will make little difference if any at all. However, choosing to stain over a light stain with a darker wood stain will work just fine.
Do you have to sand off stain before restaining?
You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
Can stained wood be sanded and restained?
Apply a coat of sanding sealer to the wood with a brush, using short, even strokes. Allow the sanding sealer to dry. Stain the wood with your chosen wood stain, once again using short, even strokes with a brush. Allow the stain to be absorbed and to dry before continuing.
What happens if you stain wood without sanding?
If the wood has been stained but not finished, DO NOT scuff or sand. Doing so will remove the color from the edges, leaving the project looking uneven.
Can you sand stained wood?
To sand wood previously stained you must start by using medium-grit sandpaper followed by a progression of increasingly finer sandpaper grits. Once you’ve finished machine sanding, we recommend you sand by hand with the grain of the wood using the same grit sandpaper you were using in the machine.
What happens if I stain over stain?
1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.
Can you paint over stained wood without sanding?
Can you paint over stained wood without sanding? If you use the right primer, you don’t have to do any sanding before painting. Some of the items you can paint without sanding include cabinets, furniture, and trim molding. For the best results, though, sanding is recommended.
How much do I need to sand before staining?
For “hard to stain” woods, finish sanding with 120 grit will usually accommodate the problem. For finish sanding on most furniture hardwoods (e.g., cherry and mahogany) use 180 grit or 220 grit. The use of grits up to 600 is certainly allowed but is not standard practice.
What is a good stain remover?
Stain Removers OxiClean MaxForce Spray. Price. Sold by. OxiClean Laundry Stain Remover Spray. Price. Sold by. Shout Triple-Acting Spray. Price. Sold by. Spray ‘n Wash Laundry Stain Remover Spray. Price. Sold by. Spray ‘n Wash Max Spray. Price. Sold by. Shout Advanced Action Gel Liquid. Price. Sold by. Persil ProClean Stain Fighter. Price.
How do you prepare wood for Restaining?
Sand Thoroughly The best way to stain wood is to prepare the wood surface by sanding it with a sanding block or orbital sander. Sandpaper with a lower grit number will make wood rougher, allowing more stain to absorb and create a darker color.
Can you apply stain over polyurethane?
Yes, you can stain on top of a polyurethane coat, but only with a gel stain. Gel stain forms a film over the polyurethane finish, unlike standard wood stains that work by soaking into the wood pores.
Will vinegar remove wood stain?
A-If a stain is fairly fresh, it can sometimes be removed by sponging with household ammonia diluted with water, about half and half. Pour vinegar on the stain and brush it with a stiff brush. Let the vinegar work for several minutes, then rinse off and let the wood dry.
Can you remove dark stain from wood?
To reach them, you must strip the stained area of finish by using furniture stripper, oxalic acid crystals, or a two-step wood bleach or liquid laundry bleach. Let the liquid dry until it looks powdery and then rinse the area thoroughly with clear water. Repeat if the dark stain hasn’t disappeared.
Is it better to strip or sand furniture?
Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.
