Table of Contents
Clean. Any refinishing furniture DIY starts with basic cleaning. Examine. Take an overall assessment of the piece and determine if it needs any repairs. Remove the Old Finish. Sanding. Chemical Stripper. Seal the Wood. Stain or Paint. Apply Finish.
How do you refurbish an old wood desk?
Below are six essential steps that address how to refinish wood furniture and how to strip finished wood: Step 1: Clean the Piece. Step 2: Assess the Furniture’s Current State. Step 3: Remove Old Finish. Step 4: Apply a Coat of Sealant. Step 5: Stain or Paint the Wood. Step 6: Apply a Coat of Finish.
How do you sand and paint an old desk?
Allow the wood to dry. Lightly sand all surfaces of the desk using a 220-grit sandpaper. Roughing up the surface in this way will help the new paint stick. If the desk has a chipped or flaking finish, use a heavier 100-grit sandpaper to smooth the rough spots, then finish with lighter sandpaper.
Is it better to sand or strip furniture?
Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.
How do you resurface a desk?
Step 1: Surface Prep. Step 2: Cut Laminate to Size and Clean Underside. Step 3: Apply Contact Cement to Both Surfaces. Step 4: Adhere the Laminate to the Desk. Step 5: Trim Edges With a Router. Step 6: Add Edging. Step 7: Enjoy Your New Desk!.
What can I do with my old wood desk?
Turn an old desk into a potting bench by adding shutters and more. Make your own standing laptop desk or table using a t.v. tray table for about $20. Kids art desk made from an old armoire is a great repurposed desk project idea using an armoire to make a new desk for the kids.
How can I paint an old desk without sanding?
Here are 5 Ways To Paint Furniture Without Sanding: USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep-sanded. USE A BONDING PRIMER. USE A LIQUID SANDER/DEGLOSSER.
What kind of paint should I use to paint an old desk?
For furniture, it’s best to use a satin or semigloss finish in either a latex or an oil-based paint. Never leave primer unpainted. If you choose a latex paint, a latex primer is an excellent choice for most uses.
What is the easiest way to remove varnish from wood?
All you need to do is start with 150-grit sandpaper and sand the entire surface. Once you’ve done that, move onto 220-grit sandpaper and repeat. This should remove the varnish. An orbital sander will make this job much easier and quicker if you’re removing varnish from a flat surface.
How do you refinish finished furniture?
Clean. Any refinishing furniture DIY starts with basic cleaning. Examine. Take an overall assessment of the piece and determine if it needs any repairs. Remove the Old Finish. Sanding. Chemical Stripper. Seal the Wood. Stain or Paint. Apply Finish.
How do I sand my desk?
Purchase a 120-grit piece of sand paper and rub down the entire surface of the desk. Sand until the entire surface is smooth and the previous color is completely gone. After it is smooth, use a 220-grit piece of paper and sand the desk again. Always sand with the grain of the wood.
How much does it cost to refinish a desk?
Follow This Cheap Method. It only costs $86.99 to refinish a desk with no help. A professional can charge between $40 and $60 per hour to refinish the desk.
How do you make an old study table look modern?
8 Ways to Make Old Furniture Look New Strip old painted finishes. Stain wood tables and chairs. Reupholster an antique. Whitewashing, liming and pickling. Milk paint. Latex and oil paints. Spray paint. Re-cover a seat cushion.
What can I do with my extra desk?
35 Hacks, Tips, and Ideas to Give You the Most Organized Desk Use a hanging closet organizer to store extra office supplies. A rolling cart next to your desk adds storage and surface area. Repurpose a utensil organizer as a drawer divider. Store often-used tools in cups on a lazy susan.
What can you do with old antique furniture?
Local places where you could sell your antique furniture are: Antique fair. Antiques mall. Antique store. Consignment store. Flea market. Local Craigslist marketplace. Local Facebook Marketplace. Local antiques dealer.
What happens if you don’t sand before painting?
Sanding also removes any bumps and impurities from the wood which would make it look uneven and messy. If you don’t sand before painting you will likely end up with an uneven finish and a paint job that will likely end up peeling after a few months.
How do you paint a finished desk?
How to Paint a Prefinished Desk Remove any hardware with a screwdriver, if applicable, and place it off to the side. Sand the desk with 220-grit sandpaper or a sanding sponge. Wipe down the desk with a damp rag to remove all excess dust after sanding. Apply a coat of primer to the surface of the desk.
Can I paint over varnished wood without sanding?
Can you paint over varnished wood without sanding? Yes. The oil based primer will stick to varnished or sealed wood. And then you can paint over it with latex paint.
Do you need to sand a desk before painting?
As with any paint job, clean the surface well before beginning (and if you’re not sure which method to use, test a few in small patches before committing to the whole job). Oct 26, 2017.
Is it OK to spray paint furniture?
Spray paint can be used on practically any surface, including wood, metal, wicker, plastic and resin. Spray paint dries much more quickly than brushed-on paint. Spray paint is easier to apply on furniture with spindles, small pieces, or intricate nooks and crannies.
