Table of Contents
Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.
How do you refinish a table for beginners?
Step 1: Set Up the Work Area. Step 2: Take the Table Apart and Wipe Down All the Pieces. Step 3: Do Some Preliminary Sanding. Step 4: Prepare and Apply the Paint Stripper. Step 5: Suit Up and Scrape. Step 6: Apply the Afterwash and Scrub . . . Hard. Step 7: Wash the Table and Let It Dry. Step 8: Sand the Wood.
How much does it cost to refinish a dining room table and chairs?
Furniture Refinishing Price Guide Type Per Piece Price Range Table $150-$400 Dining Chair $125-$300 Rocking Chair $200-$500 Bar Stool $100-$250.
Can you Restain a table without sanding?
You absolutely do not need to sand the finish off the table, just lightly sand enough to rough up the existing finish to give the Polyshades something to grip.
How do you refinish a wood table without stripping it?
The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It’s actually not that hard to do.
How do you make an old dining table look modern?
7 Ways to Refresh the Look of an Existing (Old/Boring/Not You) Dining Table Refinish the finish. You’d be surprised what a new finish on an old dining table can do. Distract with chairs. Forget chairs. Table cloth. Amazing light fixture. Set it. Replace the base.
Is it worth it to refinish a table?
Trying to refinish centuries-old furniture, without using a professional, can damage the furniture and lessen its value. The only exception to this rule is if the item has more personal value to you than what it is worth. However, wood furniture made between 1850 and 1960 are actually ideal candidates for refinishing.
How do I fix varnish on my table?
Where a clear finish is chipped but the underlying color is intact, fill the ding with a few drops of clear nail polish. After the polish dries, sand flush with 600-grit sandpaper. To restore the sheen on satin finishes, rub with 0000 steel wool and paste wax; for gloss finishes, use auto polishing compound and a rag.
What happens if you stain over stain?
If one section dries and is then overlapped, you are effectively applying a second coat to that overlapped area, and this will lead to blotchy finish. If the stain pools during application, you are applying too much at once; cut back.
Can you stain over already stained wood?
1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.
Do you have to remove old stain before restaining?
You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
Can I refinish just the top of a table?
Depending on the type of table top and finish you’re working with, you could get away with lightly sanding or repainting the table to give it a new look. We successfully stripped the varnish and stain and refinished the table top over a few days.
How do you hand sand a table?
Put the sandpaper on the bottom of the hand sander or electric sander (whichever you’ve chosen) before you start sanding. Begin sanding the entire wood surface with coarse-grit sandpaper (80 grit), then progress to medium-grit sandpaper (150 grit), and then to a fine-grit sandpaper (220 grit) before you stain.
How do you restore wood furniture with vinegar?
Mix a quarter cup of olive oil to a quarter cup of white vinegar. Use a soft cloth, apply a small amount of the mixture to the wood and buff the wood to a shine. The oil should replenish moisture to the wood. Again, you should test a small area first.
Can you apply varnish with a rag?
You really can use just about anything to apply varnish and other finishes to a surface, even a rag or the flat part of your hand. It’s what you do after the varnish has dried that makes the difference in the end. But in reality, any varnish can be used for a wiped finish, even polyurethanes.
How many coats of varnish do you need on a table?
For a very durable finish and one that needs to be very tough, say on a kitchen table, coffee table or end table etc, 2 to 3 coats of varnish should be enough on the top, with 1 to 2 coats on the legs/base. For chairs, benches, chests and other such pieces, 1 to 2 coats should do the trick.
What is the best varnish for a dining table?
Polyurethane varnish is the quickest and easiest way to finish a kitchen table. Most flow well when brushed on and leave few, if any, marks. Though it’s important to follow the manufacturer’s instructions carefully, properly finishing a kitchen table generally requires two to four coats of varnish.
How can I make my dining table look nice?
7 Simple Ways To Make Your Dining Room Look Expensive Eschew The Expected. Make At Least One Bold Choice. Show Off Your Favorite Serving Pieces. Add a Statement Chandelier. Emulate Your Favorite Restaurant. Create an Artistic Focal Point. Find the Perfect Rug.
What kind of paint do you use on a dining table?
When it’s time to paint, make sure to select a high-quality water-based enamel paint, which will give you a hard finish that’s similar to an oil paint. Kitchen tables take a beating, and you’ll need a paint that can withstand plates, cups and all sorts of other objects banging it every single day.
