Table of Contents
Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.
Can you Restain a table without sanding?
You absolutely do not need to sand the finish off the table, just lightly sand enough to rough up the existing finish to give the Polyshades something to grip.
How do you refinish a wood table without stripping it?
The key to re-staining a wood dining table top without having to strip off the original factory finish is to create a soft, faux wood grain appearance with gel stain. Followed by several coats of a durable clear sealer. It’s actually not that hard to do.
How do you strip and refinish a table?
How to Strip & Refinish Wood Furniture Step 1: Choose a Work Area. Work in a well-ventilated area such as your open garage or on an outdoor deck or patio. Step 2: Strip Away Old Finish. Step 3: Sand It. Step 4: Apply Sanding Sealer. Step 5: Stain It. Step 6: Apply Sealant.
Can you sand a stained table?
Sand & Finish Let your stain sit for 24 hours to completely dry. For a final smoothing, carefully sand with a fine-grit sandpaper (220 grit) using a hand sander. A hand sander is important for the final stage of sanding because it is more gentle than an electric sander.
Do you have to remove old stain before restaining?
You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
What happens if you stain over stain?
If one section dries and is then overlapped, you are effectively applying a second coat to that overlapped area, and this will lead to blotchy finish. If the stain pools during application, you are applying too much at once; cut back.
Is it better to sand or strip furniture?
Stripping is Faster and Often Safer. Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.
How do you stain over stained wood?
If the object you’re hoping to stain has been sealed with a topcoat, you won’t be able to restain it, but you can go over it with a coating or a colored stain blend. As an alternative, you could color the wood with an oil-based paint, but the opacity of the oil-based paints can hide the grains.
How do you sand and Restain a dining room table?
Step 1: Clean the Surface. Use gentle soap and water to remove dirt and oils from the table’s existing finish. Step 2: Apply Stripper. If the table is painted or varnished, you’ll need to strip the surface. Step 3: Clean With Mineral Spirits. Step 4: Sand Table Surface. Step 5: Apply Stain. Step 6: Apply Finish.
Can you Restain wood without sanding?
Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There’s no stripping or heavy sanding necessary to remove the old finish!.
Can you remove wood stain from wood?
Removing wood stain may seem like a daunting task, but it can be a simple DIY project with the right know-how. So, technically you must first use the chemical stripper to clear away the varnish (and some of the stain will lift, too), then sand away a thin layer from the surface of the wood to remove most of the stain.
How do you make an old dining table look modern?
7 Ways to Refresh the Look of an Existing (Old/Boring/Not You) Dining Table Refinish the finish. You’d be surprised what a new finish on an old dining table can do. Distract with chairs. Forget chairs. Table cloth. Amazing light fixture. Set it. Replace the base.
What happens if you sand after staining wood?
Sanding before knocks down the fibers. Making it wet with stain or other finish sometimes makes the fibers stand up again – called raising the grain. Sanding after an early finishing step will knock down this fuzz and make your surface and finish appear smoother than if the grain were left raised.
Can you sand stain off of wood?
Sand out the stain To sand wood previously stained you must start by using medium-grit sandpaper followed by a progression of increasingly finer sandpaper grits. This should remove most of the color left by an old stain. If you’re applying a new stain, it should mask any residual color.
What grit sandpaper should I use to remove stain?
Stain is notoriously hard to remove from wood. Some types dye its surface, while others carry pigment deep into the pores. The only real solution is to remove the top layer of wood by sanding, and light-duty sandpaper just won’t cut it. The best all-purpose sandpaper for removing stain is 100-grit.
Can I stain over stain without sanding?
You can stain over stained wood without sanding off the old finish.
What is a good stain remover?
Best Overall: OxiClean MaxForce Laundry Stain Remover Spray, 12 Fl. Best Gel: SHOUT Advanced Stain Remover for Clothes with Scrubber Brush. Best Wipes: SC Johnson Shout Instant Stain Remover Wipes. Best With Enzymes: Biokleen Bac-Out Enzyme Stain Remover.
How can I change the color of stained wood?
If you try to apply a light color of stain over the top of an existing dark finish, you won’t notice much difference. To completely alter the color of the finish, strip down the existing stain using a petroleum-based solvent. Once you’ve lightened the wood, you may add a lighter color of stain.
