How To Refinish A Dresser - Seniorcare2share

Table of Contents

How to Refinish a Dresser Step 1: Choose a Stain. Staining beautifies wood and helps reduce the contrast between the different types of grains in different pieces of furniture. Step 2: Remove Hardware, Drawers and Clean Surfaces. Safety Alert! Step 3: Remove Old Finish. Step 4: Apply Sanding Sealer. Step 6: Finish It.

Is it better to sand or strip furniture?

Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. Jan 3, 2018.

Do you have to sand a dresser before repainting it?

As with any paint job, clean the surface well before beginning (and if you’re not sure which method to use, test a few in small patches before committing to the whole job). Oct 26, 2017.

How do you refinish a dresser without stripping?

How to Paint a Dresser Without Sanding Step 1: Prepare the Surface. Wipe the dresser and drawers down thoroughly with warm, soapy water to remove the grime and oils. Step 2: Apply a Stain Blocker. Step 3: Paint. Step 4: Seal and Protect.

What do you need to refurbish a dresser?

Supplies needed to refurbish an old dresser Sandpaper in fine, medium and coarse. Oscillating tool with sanding attachment and pads. Cloth for wiping sanding dust. Screwdriver for removing hardware. Paint brushes. Drop cloth. Water-based pre-stain. Water-based stain in pink.

How do you refinish a wood dresser?

How do you refinish finished furniture?

Clean. Any refinishing furniture DIY starts with basic cleaning. Examine. Take an overall assessment of the piece and determine if it needs any repairs. Remove the Old Finish. Sanding. Chemical Stripper. Seal the Wood. Stain or Paint. Apply Finish.

What happens if you don’t sand furniture before painting?

When You Can Skip Sanding, Deglossing and Priming There will be times that you can skip all these things. If the finish on your furniture isn’t damaged or chipping, it’s flat not shiny and you aren’t painting it a drastically different color, then you may be able to just go ahead and start painting.

Can you paint over varnish without sanding?

Can you paint over varnished wood without sanding? Yes. The oil based primer will stick to varnished or sealed wood. And then you can paint over it with latex paint.

What happens if you don’t sand before staining?

You need a smooth surface with no blemishes because stain will highlight scratches and dings in the wood. Always sand down to clean wood (if you have enough meat left of the wood) before applying any stain. Too fine and the wood won’t be able to accept the stain.

Can I stain over stain without sanding?

You do not need to sand off the previous stain and finish. The purpose of the light sanding is to give a little tooth to the surface to help your new stain colour stick.

How do you restore old wood furniture without stripping?

How to restore wood furniture without sanding and stripping Remove any hardware. Wipe on mineral spirits. Clean the surface. Fix the white rings. Fill small cracks and imperfections. Try to fix the dents. Restore the colour with gel stain. Renew the lustre with a wipe-on finish.

What kind of paint do you use on a dresser?

Materials for painting a dresser Any furniture paint will work including chalk paint and latex paint.

How do you restore an old dresser?

Quick Antique Dresser Restoration Steps: Lightly sand entire piece of furniture with a fine grit. Using gloves and a rag in a well ventilated area, apply a bit of finish restorer to the rag and then rub it into the wood a section at a time. Continue until the whole piece is covered to your satisfaction.

How much does it cost to refinish a dresser?

The average cost of $100 to $700 largely comes down to the type of furniture you’re looking to refinish and the condition of that piece.Furniture Refinishing Price Guide. Type Per Piece Price Range Dresser $300-$1,000 Bed $350-$900 Pool Table $300-$500 Kitchen Cabinets $1,600-$3,800.

What is the best product for stripping paint off wood?

The best paint stripper Best Overall: Citri-Strip Paint and Varnish Stripping Gel. Most Eco Friendly: Dumond Smart Strip Advanced Paint Remover. Fastest Working: Sunnyside 2-Minute Advanced Paint Remover. Most Family Friendly: MAX Strip Paint & Varnish Stripper. Most Heavy Duty: Dumond Peel Away 1 Heavy-Duty Paint Remover.

How do you sand a dresser before staining?

Sand the dresser using a medium-grit sandpaper, moving with even pressure and in the direction of the grain. Sand thoroughly, including all details. Wipe down with a tack cloth to remove dust. Sand again with a finer-grit sandpaper.

Do you have to remove old stain before restaining furniture?

You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.

How much should you sand before staining?

For “hard to stain” woods, finish sanding with 120 grit will usually accommodate the problem. For finish sanding on most furniture hardwoods (e.g., cherry and mahogany) use 180 grit or 220 grit. The use of grits up to 600 is certainly allowed but is not standard practice.

Can you stain over already stained wood?

1. Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.

Can you stain finished wood?

When staining over an existing finish, it’s much easier and safer to go darker rather than lighter. Keep in mind, because you’re applying a new stain to an existing color and finish, the color you choose will be altered because the original finish will show through somewhat.

Can you stain over varnish?

It is possible to apply stain over varnish, as long as you aren’t expecting results similar to those when staining untreated wood that drinks in the stain. Clean and rough-up the varnish first to remove any grime, dust or debris and also to give the surface some texture the stain can cling to.