Table of Contents
Which microphone is best for recording violin?
AKG C 414 XLS condenser microphone: Best sounding condenser mic on violin. Beyerdynamic M 160 ribbon microphone: Best sounding ribbon dynamic mic on violin in studio and live performances. DPA d: dicate 4011C condenser microphone: Best clip-on microphone for violin in studio and live performances.
Where do you put a microphone on a violin?
Microphone positioning The spot under the bridge, between the strings and the deck, is a good position to mount a mic. This position represents many of the elements of the violin sound we want to capture – the sound of the soundboard as well as ‘bite’ when the strings are plucked or bowed.
How do you mic a violin for live performance?
I have found that positioning a mic about halfway up the fingerboard is the best tone compromise for “mic”ing a violin live. Although I most often use a clip mic near the chin-rest pointing above the bow/string area to avoid having it in my line of sight if I look at my left hand.
How do I connect my acoustic violin to my computer?
Using a relay between the electric violin and the Line input Connect your electric violin to your amp, then your amp to your computer using the headphone output or the line-out of the amp and the Line input of the motherboard of your computer.
Should I record violin in stereo or mono?
However, recording a violin performance in a nice‑sounding room often is worth doing in stereo, although whether you choose to work with X-Y, M/S or ORTF, for example, will depend on the nature of the room acoustics, the perspective you require, and the kind of stereo imaging you favour.
How far should a mic be from a violin?
In general, the best starting place for a mic on a string instrument is: 2 to 3 feet away from the instrument. Out and up from the instrument. Imagine the sound projecting out at the same angle as the face of the instrument.
What are condenser mics?
Condenser microphones are best used to capture vocals and high frequencies. They are also the preferred type of microphone for most studio applications. Also known as capacitor microphones, condenser mics are mainly used in studios because of their detail and accuracy.
How do you mic a solo violin?
Position it out and up from the instrument. Point it toward the area where the bow plays. Large diaphragm condenser microphones (in a cardioid pattern) generally sound good on violins, violas, and cellos alike. A close ribbon mic sounds great in combination with a small or large diaphragm mic (at more of a distance).
How do I record my electric violin on my computer?
You need recording software, a computer, and a USB-compatible preamp. Lead the electric signal from the violin into the preamp, and lead the output from the preamp into a USB port on the computer. Set your recording software to listen at that port and pick up the signal.
What are ribbon mics good for?
Ribbon microphones are the most natural mics that you can use to capture the sound of an instrument, a voice, and even the ambience of a room. Due to their figure-of-8 polar pattern, massive low-end pick-up, and natural high-frequency roll-off, ribbons really hear more like your ears than any other mic out there.
How do you mic a fiddle?
In the studio, fiddle players tend to go with an overhead mic positioned about 8-10 inches from the instrument. Beyond that point, use your ears. Some mics sound better right over the bow, others are better down the fingerboard. Some mics sound better on axis, others are better off axis.
How do I mic my cello?
My go-to position is to place a microphone slightly up and to the right of the cello’s bridge. It will usually be angled down slightly and sit about one to two feet from the instrument. If more string noise is needed turn the microphone more towards the bridge.
Can I plug guitar into mic input?
If your computer has audio input jacks, you cannot directly plug your electric guitar into it and you must use an audio interface. If you try to plug your guitar directly into your computer’s mic or line-in input jacks using an adapter, you risk damaging your guitar or your computer.
Can you plug an acoustic guitar into a computer?
To connect an acoustic guitar to a computer you can use a microphone in front of the guitar, plugged into a computer’s audio interface. You can also attach a pickup to the guitar, its jack cable plugging into the interface. Acoustic-electric guitars can plug straight into the interface.
Why use an electro acoustic guitar?
Electro acoustic guitars are designed to eliminate that problem, and can be plugged directly into speakers with a crisp, consistent sound! The great thing about modern electro acoustic guitars is that their pickups and preamps are able to capture their “unplugged” sound with great conviction.
How do you mic a cello live?
When recording cello, a very intuitively simple mic setup can work wonders. Mount a large-diaphragm condenser mic 1-3 feet in front of the instrument, aimed where the bow meets the strings. Experiment with this to play with the tone. A closer mic will get a fuller, deeper tone due to the proximity effect.
What is the best mic for recording flute?
10 Best Flute Microphones Reviewed Sennheiser MD 441. Sennheiser MD 441-U versatile dynamic super-cardioid pattern microphone a five-position. SM57 Flute Shute. Shure SM-57 Cardioid Dynamic Instrument Microphone. Audix ADX 10-FLP. AEA R88MK2. Sennheiser MKH 40. Neumann U87. AKG C414. Neumann TLM103.
