Table of Contents
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
What does the 265 70R17 mean?
How to read your tire size long description. An arrow points to the numbers 265/70R17 115T on the inner part of the tire sidewall. 265 is the width, 70 is the aspect ratio, R stands for radial, 17 is the wheel diameter and 115T is the load index and speed symbol.
What do the #s on tires mean?
Each letter coincides to the maximum speed a tire can sustain under its recommended load capacity. For instance, S is equivalent to a maximum speed of 112 mph. Even though a tire can perform at this speed, Continental Tire does not advocate exceeding legal speed limits. Rating. Maximum Speed.
What size tire is 255 70R17?
Tire Size Calculator – Tire & Wheel Plus Sizing BETA Unit: Imperial Imperial Metric Rim Diameter 17.00 in Rim Width Range 6.50 in – 8.50 in Overall Diameter 31.06 in Sidewall Height 7.03 in.
What is P265?
Let’s take for example P265/60R18. This code gives you the following information about your vehicle’s tire: P = Passenger Tire (Light Truck Tires will begin with the prefix LT). 265 = Section Width in millimeters (measured at the widest part of the tire from sidewall to sidewall).
What does dot mean on a tire?
Any tire used on U.S. highways/streets should have a DOT (Department of Transportation) mark. The DOT symbol certifies that the tire is compliant with the U.S. Department of Transportation’s safety standards.
How do you decode tires?
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
What does Zr mean on tires?
Tires having a maximum speed capability over 149 MPH may have “ZR” in the size designation. Tires with a maximum speed capability over 186 MPH are required to include “ZR” in the designation. Below are examples of tire sizes with a “ZR” speed rating.
What size is 265 75R17 in inches?
Plus Sizes 265/75-17 265/70-17 Diameter inches (mm) 32.65 (829.3) 31.61 (802.8) Width inches (mm) 10.43 (265) 10.43 (265) Circum. inches (mm) 102.57 (2605.32) 99.29 (2522.07) Sidewall Height inches (mm) 7.82 (198.75) 7.3 (185.5).
How tall is a 295 70R17 tire?
Open Country M/T 295/70R17 Tire Specs Size Diameter Width LT295/70R17 128P E BSW 33.5″ 11.9″.
How tall is a 265 70R17 tire?
265/70R17 tires are 31.6″ tall, have a section width of 10.4″, and fit wheels with a diameter of 17. The circumference is 99.2″ that translates into 638 revolutions per mile. As a rule, they can be mounted on the wheels with 17″ x 7-9″(LT Tires 7-8.5″) rim width.
What does 65r17 mean?
This number indicates that your tire has a width of 265 millimeters. 65. This number means that your tire has an aspect ratio of 65%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 65% of the width.
What does LT265 75R16 mean?
This formula is a quick way to get the tire diameter of those metric tires that are common on just about everything stock. For example a LT265/75R16 would be around 31.6 inches tall and 10 inches wide. “LT” means Light Truck and “P” means Passenger tire. The bigger number (on the left) is the Section Width.
What does the 60 mean on a tire?
60 is the two-figure aspect ratio. This percentage compares the tire’s section height with the tire’s section width. For example, this aspect ratio of 60 means that the tire’s section height is 60% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.
Do all tires have a DOT code?
Every tire sold in the United States has a DOT code stamped on the side. A complete tire DOT code will begin with the letters DOT and is followed by 10-12 letters and numbers.
What do the yellow and red dots on tires mean?
If the valve stem is located at the heaviest point on the tire, it will be lined up with a yellow dot on the sidewall. When a red dot is lined up with the valve stem you can assume that the valve is at the tire’s lightest point.
What does yellow dot on tire mean?
When fitting a tyre, you should line up this yellow dot with the valve stem as this is the heaviest point of the wheel. Fewer weights make for a more balanced wheel, which then means a quieter, more comfortable ride, and a longer-lasting tyre.
How do I identify my tires?
The two digit number after the slash mark is the aspect ratio which measures the tire’s cross-section to it’s width. If the tire size is 255/60 R16, the 60 means that the height is 60% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
What does 75 mean on a tire?
75—This is the tire’s aspect ratio, comparing the tire’s height to its width. For this tire, it means its height is 75 percent of its width. R—This defines the construction within the tire. “R” stands for radial. “B” means belted bias and “D” stands for diagonal bias construction.
Will a 65 tire fit a 60?
Yes, the only real difference is that ratio between the tread width and the height of the sidewall will change. The lower the middle number the lower the profile of the tire the larger the number the higher the tire profile.
