Table of Contents
The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.
How do you read a tire code?
The last four digits of this code tell you when your tire was manufactured. The first two numbers indicate what week of the year it was made (out of 52 weeks per year), and the second two numbers represent the year. For example, 5200 would reveal that a tire was manufactured during the 52nd week of the year 2000.
What do the #s on tires mean?
Each letter coincides to the maximum speed a tire can sustain under its recommended load capacity. For instance, S is equivalent to a maximum speed of 112 mph. Even though a tire can perform at this speed, Continental Tire does not advocate exceeding legal speed limits. Rating. Maximum Speed.
What does the 265 70R17 mean?
How to read your tire size long description. An arrow points to the numbers 265/70R17 115T on the inner part of the tire sidewall. 265 is the width, 70 is the aspect ratio, R stands for radial, 17 is the wheel diameter and 115T is the load index and speed symbol.
What does dot mean on a tire?
Any tire used on U.S. highways/streets should have a DOT (Department of Transportation) mark. The DOT symbol certifies that the tire is compliant with the U.S. Department of Transportation’s safety standards.
What does Zr mean on tires?
Tires having a maximum speed capability over 149 MPH may have “ZR” in the size designation. Tires with a maximum speed capability over 186 MPH are required to include “ZR” in the designation. Below are examples of tire sizes with a “ZR” speed rating.
What does BSW mean on a tire?
B, BLK, BW, BSW = Blackwall or Black Sidewall. W, WW, WSE = Whitewall or White Sidewall. XNW = Extra Narrow White Width.
What is P265?
Let’s take for example P265/60R18. This code gives you the following information about your vehicle’s tire: P = Passenger Tire (Light Truck Tires will begin with the prefix LT). 265 = Section Width in millimeters (measured at the widest part of the tire from sidewall to sidewall).
What does 65r17 mean?
This number indicates that your tire has a width of 265 millimeters. 65. This number means that your tire has an aspect ratio of 65%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 65% of the width.
What size tire is 255 70R17?
Tire Size Calculator – Tire & Wheel Plus Sizing BETA Unit: Imperial Imperial Metric Rim Diameter 17.00 in Rim Width Range 6.50 in – 8.50 in Overall Diameter 31.06 in Sidewall Height 7.03 in.
How do you decode a dot number on a tire?
How to find the DOT code? The first two digits of the DOT code indicate the production week of the year (from 1 to 52). The third and fourth digits of the DOT code indicate the year of manufacture. If your DOT code is a 3-digit number, it means your tire was produced before 2000.
What do the yellow and red dots on tires mean?
If the valve stem is located at the heaviest point on the tire, it will be lined up with a yellow dot on the sidewall. When a red dot is lined up with the valve stem you can assume that the valve is at the tire’s lightest point.
How do you read a DOT tire date code?
Remember that the last four digits of the code are the date the tire was manufactured. You can check the first two digits of the DOT code to know the week of the manufacturing. The last two digits will reveal the manufacturing year. For instance, when it was written in 0203, the manufacturing year was 2003.
What is the difference between r17 and zr17?
can a zr17 tire fit on an r17 rim? ZR basically means the tire is adapted for speeds above 149mph. ZR tires includes the speed ratings V(149mph), W(168mph) and Y(186mph). The R stands for radial.
Can I use R tires instead of Zr?
The Z in ZR corresponds to an old label used by manufacturers to indicate that the speed index is higher than V, i.e. 150 mph. Thus, a ZR tyre has a speed index of V, W, or Y. There is therefore no difference between a ZR or an R tyre with the same speed index.
What does XL mean on tires?
Some vehicles are equipped with “XL” tires. It doesn’t mean that they’re extra large, but it does mean that they are extra-load tires. The load index on these tires is much higher than a standard-load tire, which is why it is important to replace an XL tire with another XL tire.
What does VSB mean on tires?
VSB: Vertical Serrated Band.
What speed rating is S?
Tire Speed Rating Chart Speed Rating Symbol Speed (mph) Speed (km/h) Q 100 mph 160 km/h R 106 mph 170 km/h S 112 mph 180 km/h T 118 mph 190 km/h.
What do the 3 numbers mean on tire size?
Tire Width Is the width of the tire measured in millimeters from sidewall to sidewall. The first three-digit number in the tire size refers to the tire width. For instance, in a size P215/65 R15 tire, the width is 215 millimeters.
What does the 60 mean on a tire?
60 is the two-figure aspect ratio. This percentage compares the tire’s section height with the tire’s section width. For example, this aspect ratio of 60 means that the tire’s section height is 60% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.
What does 115T mean on tires?
The 115T signifies that the tire has a 4ply standard load sidewall. The 121S signifies a 10 ply load range E sidewall. The standard load tire is best for a half ton truck, whereas the load range E sidewall is best for a 3/4 and 1 ton truck.
