Table of Contents
Curtain measurements are always written with the width first and then the length. For example, a panel that is 46″ x 54″ is 46 inches wide and 54 inches long.
What do the measurements on curtains mean?
When we list or write curtain measurements, the width always comes before the drop. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
What size curtains do I need for a 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How much curtain width do I need?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
What is the right length for curtains?
How Long Should Curtains Be? Floor-length is the way to go, unless there’s a radiator or a deep sill in the way. Ready-made panels are available in lengths from 63 to 144 inches. Measure from the floor to where you’ll hang the rod, then round up.
How wide should curtains be for 60 inch window?
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
How much wider Should curtain rods be than the window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
Do you double the width for curtains?
The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.
How wide should curtains be for a 36 inch window?
Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full. Always round up to the next full number.
How do I calculate how much fabric I need for curtains?
There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
Are 84 inch curtains long enough?
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.
How do I choose the right curtains?
9 Important Tips on How to Choose Curtains #1: Difference between curtains and drapes. #2: Pick out the right fabric. #3: The choice of colour can make or break the look. #4: Choosing between prints and solids. #5: Selecting the ideal length. #6: Measuring the width. #7: Trims and accessories.
Should sheers and curtains be the same length?
The length of your sheer curtains can determine whether the room looks stylish or dowdy. For example, sheers hung beneath another curtain should always be at least one inch shorter than the top curtain.
How wide should curtains be for 48 inch window?
Curtain Width Guide If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
What diameter should my curtain rod be?
Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.
How do you measure for hanging curtain rods?
To determine the length of the rod, measure the width of your window and add eight to twelve inches. Each curtain panel should be at least as wide as your window.
How far should a curtain pole extend past window?
For a typical window without architraves, we recommend poles/tracks overhang the width of the window by not less than 15cm (6″) each side (excluding finials). Mark the pole/track and check your measurements again.
