Table of Contents
A ton of air conditioning equals 12,000 BTU, and 30 divided by 12 equals 2.5, so the data plate below indicates the system is 2-1/2 tons. Here’s a rundown of the range you will encounter: 18 = 1.5 tons, 24 = 2 tons, 30 – 2.5 tons, 36 = 3 tons, 42 = 3.5 tons, 48 = 4 tons, and 60 = 5 tons.
How do I know what ton my American Standard is?
Find the model number. Within this string of letters and numerals, you should find an even, two-digit number. The possibilities on residential units range from 18 to 60. Divide the number by 12 (which represents 12,000 Btu/hr, or one ton of cooling capacity) to get your AC unit’s tonnage.
How can I tell how old my American Standard air conditioner is?
The date of production/manufacture or age of American Standard® HVAC equipment can be determined from the serial number located on the data plate.
What do carrier model numbers mean?
Carrier systems made in the last 20 years or so encode the week and year of manufacture within the first 4 digits. The first 2 are the week of the year (1-52) and the second are the year. For example 0199 would mean the system was made the first week of January in 1999.
How do I read my Bryant model number?
The serial number is formatted by 4 numbers, a letter, then 5 numbers. The first two numbers are the week of manufacture and the following two numbers are the year of manufacture. The date of manufacture can usually be found on these units.
How do I know if my AC is 1.5 ton?
Look for an even, two-digit number between 18 and 60. Or, you might see a three-digit number starting with 0. If you find one of those numbers, chances are good it’s the unit’s BTUs: 018 = 18,000 BTUs = 1.5 tons.
How old is my furnace?
Your furnace should have a sticker located someplace on the exterior or interior paneling. If you don’t see a sticker with the model and serial number on the outside, find where the paneling opens up and check if it’s located inside that door. Write down—or take a photo of—the serial number for reference.
What do Trane model numbers mean?
Trane uses model numbers incorporate the BTU equivalent into their unit model numbers, or reference the tonnage. They have model numbers that tell everything from the size of the unit to whether the system has had major upgrades.
How do I read my YORK model number?
How to Decode York Model Number T = Brand. C = Type (C is AC and H is Heat Pump) G = Series Chassis. D = SEER rating. 36 = Tonnage. S = Compressor (Single Stage) 2 = Refrigerant (R22) 1 = Voltage (Single Phase).
How do I read my Ruud model number?
Find the letter in the middle of the serial number. The first two numbers after it are the week of manufacture, and the third and fourth numbers after the letter are the year of manufacture. The month and year of manufacture is also indicated at the upper right of the data plate.
How do I find the SEER rating on a model number?
An A/C’s SEER rating is also listed near the top of the unit’s manufacturer label, where the model and serial number are listed. Look for the beginning digits of the model number. For example, a model number that begins with 15AC means the air conditioner has a SEER rating of 15.
What do the numbers on a AC mean?
The numbers you’ll see on residential air conditioners and heat pumps are: The 3 digits in the model number tell you the nominal capacity in thousands of BTU/hr. Since each 12,000 BTU/hr is equivalent to 1 ton of air conditioner capacity, it’s easy to figure out how many tons of nominal capacity your AC has.
How do you read a York Furnace serial number?
This style is the original York serial number, formatted in 10 character begins with four letters and six digits numbers. The date of the production or manufacture is hiding in the 2nd and 3rd digits serial number. The second letter is the month of manufacture and the third letter is the year of manufacture.
Where is the model number on a Bryant furnace?
Gas or Oil Furnaces: Remove the front door and look at the upper-left side of the unit. You can find the model number listed on a “rating plate” sticker inside of the unit.
How long do Bryant AC units last?
The Lifespan of a Bryant Heating System. Bryant heating systems are known for their longevity and dependability. Even with proper maintenance and care, there will be a time when your unit may have to be replaced. A typical heating system may last for 16 years or more.
How can I tell the difference between 1 ton and 1.5 ton AC?
1 Ton AC can remove 12,000 BTUs of heat per hour and 1. 5 ton AC can remove 18,000 BTUs of heat. 1.5 ton AC being more powerful in terms of cooling than a 1 ton AC will surely cool the same size room faster. A 1.5 ton AC produces 50% more cooling than 1 a ton AC.
What is the difference between 1 ton and 2 ton AC?
-> 1-ton AC – Room size less than or equal to 130 sq. ft. -> 1.5-ton AC – Rooms between 130 sq. -> 2-ton AC – Rooms bigger than 150 sq.
