Table of Contents
What do the numbers mean on a survey?
Each segment will contain numbers and letters indicating the direction from North that the line proceeds as well as the distance to the next point. For example, a segment may have the notation N 15° 30′ 45″ E on one side of the line and the notation 166.25′ on the other side of the line.
How do you read a plat of survey?
Plat maps list the house number for each parcel, along with the shape of the parcel, or the parcel boundary. The small numbers along the bottom of the parcel is the width, and the number along the right side of the parcel is the depth. Most plat maps have these numbers in feet.
What do survey colors mean?
It shows where the digging will occur. Pink indicates temporary survey markings. When a land surveyor visits to precisely draw the exact lines between adjoining properties, he or she will mark the ground in pink. This indicates the legal boundaries affecting the project. Red is the color for electrical equipment.
What does B l mean on a survey?
BSL – Building Setback Line.
What does iron pipe found mean on a survey?
IPF – Iron pipe found. IRF – Iron rod found. L.O.D. – Limit of Disturbance. The area had to be cleared, graded, etc.
What does R mean in surveying?
random line used in a road layout. Bearing The direction of a line between 0° and 90°, measured clockwise or. counterclockwise from north or south. Glossary of Terms Used in Boundary Surveying. Page 2.
What does FF mean on a survey?
Also referred to as FF is Finished Floor Elevation. The term FFE refers to the top of the structural slab and its elevation above sea level. FG. Finished grade. The term FG refers to the elevation above sea level for the finished grade or finished ground.
What do surveyors markings mean?
Survey markers, also called survey marks, survey monuments, or geodetic marks, are objects placed to mark key survey points on the Earth’s surface. They are used in geodetic and land surveying. A benchmark is a type of survey marker that indicates elevation (vertical position).
How do you read a metes and bounds?
A metes and bounds description, which means distance and direction, begins and ends at a landmark called the point of beginning (POB). The property is measured and described in a point of direction from a starting point using angles, distance, directions, and landmarks.
What is measurement in land survey?
In Surveying all measurements are horizontal, can be inclined; reduce to horizontal and vertical components in plotting. Distance between 2 points on a plan or map is always horizontal distance irrespective of their elevation, (distance between their projection on horizontal plane).
How much does a survey cost?
Land Survey Cost National Average Cost $422 Minimum Cost $250 Maximum Cost $700 Average Range $380 to $540.
What is BSD in land survey?
Subdivision of Lots. Bsd – By Private land surveyors. Psd – By Private land surveyors. Consolidation of Lots. Bcn – By Public land surveyors.
How do you know if a survey plan is real?
To confirm the authenticity of a survey plan, the following information must be there: – The name of the owner of the land surveyed. – The size of the land surveyed. – The address/description of the land surveyed.
How do you know where your boundary line is?
Most boundary agreements will be in writing and should be noted on your title documents. It is therefore useful to check your title documents, as well as any information you were provided with at the time you bought your property, for any mention of a boundary agreement.
What is the Orange underground line?
Red: Electric power lines, cables or conduit, and lighting cables. Yellow: Gas, oil, steam, petroleum, or gaseous materials. Orange: Communication, alarm or signal lines, cables or conduits, and fiber.
What does pink survey flags mean?
Pink flags – These are used as temporary survey markings. As surveyors measure, they mark their work with pink flags. Pink is also used to mark mysteries. If a utility can’t be identified, a worker will pink flag it.
What does pink survey tape mean?
Pink is strictly used by land surveying companies to state where the temporary survey markings are. The color codes for locating utilities, conduit or rebar in concrete can present slightly different colors depending on the surface. Most often used are the colors red, yellow, blue and black.
What is G line surveying?
The G-line sketches the making of the entire sketch. It is an abstract line that transforms the sketch into various dimensions of triangles to allocate the boundary line and various points of the sketch. Any inaccuracies made in ascertaining the G-line will damage the calculations done herewith.
What does M mean on a survey?
Glossary of Land Survey Terms | M: Map to ‘More or Less’ Let’s Talk. Our Story. When You Retain Us. Our Clients.
What does n/o mean?
N/O Acronym Definition N/O Normally Open Contact.
What markers do surveyors use?
The three most commonly used markings are the simple stakes, flags and pins. These surveyor symbols are common to any construction project and guarantee that everything gets put in the right place.
What does a surveyor pin look like?
Survey pins are thin iron bars, 2 or 3 feet long and sometimes capped with plastic, which the original survey crew inserted on the property lines. If you have access to a metal detector, move the device over the ground along the sidewalk to the curb to locate the survey pin.
